Balance work of Naru Nangal Distribution System of Naru Nangal Distributary-2 offtaking at RD 3197 mtr of Naru Nangal Lift Irrigation Scheme offtaking at RD 65693 of Kandi Canal Stage -2

Amount

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.( stringing only)

160mm o/d PVC pipe of 2.5 Kgf. / sqcm

200mm o/d pipe of 2.5 Kgf. / sqcm

250mm o/d PVC pipe of 2.5 Kgf. / sqcm

180mm o/d PVC pipe of 2.5 Kgf. / sqcm

225 mm o/d PVC pipe of 2.5 Kgf. / sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet,all carriage complete (with the approval of Engineer in-charge).Class PN-1 as per ISI 180 mm i/d

180mm i/d Sluice Valves flanged Supplying and fixing of ISI Marked CI D-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting ,jointing and testing etc. but excluding cost of excavation complete.

Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete. C.I Single air valve screwed (Size 50mm)

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

Size 0.6 m. x 0.6 m.

Size 0.9 m. x 0.9 m.

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water,diversion for traffic, night signals. providing & fixing caution boards,crossing over trenches for access watching, to the houses,fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.Earth work upto 1.5 m. Depth for For Ordinary soil

Aggregates (average rate of all the quarries) Note:- Quarry wise aggregates rates attached at Annexure-I)Fine Sand with FM not less than 1.6( filling sand in Alfa valve, air vent valve and sluice valve chamber including supply and carriage of sand from local choe upto km. , including loading and unloading and rehandling if any complete in all respects)

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type

PLASTERING & POINTING 12.5 mm thick cement plaster 1:2

CENTRING AND SHUTTERING Shuttering for precast and plain or Reinforced concrete blocks, wall plates, bedplates, shelves etc.

Supply and fixing flange tail end point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 180 mm

Providing & fixing alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.160mm

Providing & fixing alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.180mm

Providing & fixing alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.200 mm

Providing & fixing alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge. for 250mm

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Any other item