Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAccepted-AOC | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹4.9 L+₹78,410.90 (18.9%)Rejected-AOC | L2 | Rejected-AOC Other than lowest |
Tender Value
₹6.5 L
EMD Value
₹13,000
Closing Date
9 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I CG
Noida
MISC REPAIR WORKS OF BR NATURE OF MD ACCN AND OTM BLDGS AT SECTOR 24 AND 52 UNDR AGE I CG NOIDA
2023_MES_574386_1
AGE I CGN 38 2022 23
Open Tender
Civil Works
Item Rate
180 days
Noida
E a (i)
7 documents required · 7 mandatory
₹500
AGE I CG
₹13,000
30 Aug 2023
12 Jan 2023
11 Feb 2023
12 Jan 2023
9 Feb 2023
26 Jan 2023
Amount
Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc
Demolition of brick or stone masonry built in cement mortar including all necessary arches quoins etc.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store.
Demolition of cement concrete (un-reinforced) in ground floors & pavings n exc 15cm thick (below or above ground level).
Demolition of reinforced cement concrete of any description ( reinforcement cut as reqd to facilitate demolition ).
Taking down chowkhats or frames not exc. 1.5 Sqm but with shutters (without taking off shutters from the frames)
Taking down chowkat or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each
Taking down shutter of any description n/exe 1.00 sqm each
Taking down shutter(any description) area exceeding 1 sqm but not exceeding 2 sqm each.
M&L for old size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified.
All as per item No 11 above but excepts bricks.
M&L rendering 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) complete all as specified and directed
M&L rendering 10 mm thick CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed.
M&L for rendering 5 mm thick in cement mortar 1:3 finishing on brick or concrete surfaces finished even & smooth without using extra cement in ceiling complete.
M&L for RCC 1:1.5:3 M20 type B1 (using 20 mm graded aggregate ) as in slabs supported on walls, beams, and columns etc complete all as specified and directed.
Form work to soffits of suspended slabs such as roof slabs, floors, slabs , landing and similar works etc all as specified as directed
M&L for MS TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for columns, hooking end and binding with and including mild steel wire (annealed) not less than 0.9mm dia.
M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded aggregate as in floor to receive floor finishes etc. all as specified.
S&F Virified Ceramic dark shed/double charged/ ultrachargedtiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cm 1:4 all as specified and directed
M&L for vitrified /Granite /Marble /wood tiles textures ceramic 10 mm tiles in vertical surfaces or floors n/exe 0.36 Sqm , over 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match .
M&L for Non skid ceramic coloured joint free tiles 400mm x 400mm 7to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15 mm thick in cement mortar (1:4) laying floor finish complete all as specified and directed.
M&L for glazed ceramic coloured joint free tiles in vertical surfaces 350 x250x7mm/450x350x7mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to match all as spd including 15 mm thick screed bed in cm 1:4 all as specified and directed
M&L for kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match thick shade of the slab including rubbing and polishing laid over 15mm thick screed bed in cm (1:4) complete all as spd.
All as per item No 28 above here-in-before but on vertical surfaces of walls /skirting/dado etc and 15 mm thick backing coat in CM 1:4 complete all as spd.
M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 15 mm thick screed bed in cm 1:4 all as spd & directed.
S & F Pressed steel frames(105 x 60mm )for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,supplied and fixed
S&F 2nd class hard wood 35 mm thick paneled shutter (any number of panels )with panels of veneered particle board medium density, wood particle board with commercial face veneers .
Supply and fixed 35mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitered beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(a) (kail)
S&F for Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for door and extruded aluminium section , consisting of frame vertical and horizontal members of size 100mmx45mmx 2.5mm thick with shutter stile mmx45mmx2.50mm thick , top middle and bottom rail of size 101.60mmx44.5mm with 5.50 mm thick tinted sheet glass and PVC prelaminated particle board 10 to 12 mm thick with aluminium beading and rubber gasket/beading including fixing of hydraulic floor spring one in single leaf or two nos in double leaf door. One mortise lock for aluminium door (each) and two Nos 200 mm long aluminium tower bolts and two nos alu handles D type for each door. Fixing with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and as directed by Engr-in-Charge.
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for fully gazed window openable shutter with aluminium section , consisting of frame vertical and horizontal members of size100mmx44.45mmx1.90 mm thick for frame and section for shutter 45mmx44.5mmx1.9mm thick with 5.50 mm thick tinted sheet glass with aluminium beading and rubber gasket/ beading clip 3 nos 150 mm long , handle 02 nos D type , 75 mm long alu butt hinges min 02 nos in each leaf. Fixing with rawl plug including rectification of jambs floor/wall to match the existing surfaces all as specified and as directed by Engr-in-Charge.
S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed
S&F in repair aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed
S&F aluminium anodised barrel tower bolts extruded section of size 200 mm, all as specified and directed
S&F in repair aluminium anodised barrel tower bolts extruded section of size 200 mm, all as specified and directed
S&F aluminium anodised barrel tower bolts extruded section of size 150 mm long , all as specified and directed
S&F in repair aluminium anodised barrel tower bolts extruded section of size 150 mm long , all as specified and directed
S&F aluminium handle extruded fabricate type anodised of size 150 mm complete all as spd and directed.
S&F in repair aluminium handle extruded fabricate type anodised of size 150 mm complete all as spd and directed.
S&F in repair aluminium handle extruded fabricate type anodised of size 100 mm complete all as spd and directed.
S&F for SS butt hinges 100mm medium weight cold rolled mild steel.
S&F in repair butt hinges 100mm medium weight cold rolled mild steel.
S&F in repair butt hinges 75 mm medium weight cold rolled mild steel.
S&F MS helical door spring including roller & roller plate complete 300 mm size complete all as specified & directed.
S&F 150 mm long floor door stopper of alu alloy body and tongue, anodised with hard drawn steel spring complete.
S&F in repair 150 mm long floor door stopper of alu alloy body and tongue, anodised with hard drawn steel spring complete.
Hacking out old broken glasses thickness size quality from wooden or steel frames glazed with old putty or fixed with beads.
M&L 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane all as spd
M&L 4mm thick figured glass pin headed type and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes all as spd
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
Dismantling water storage tanks of any description/ exc 500 liters capacity and removing from site complete all as specified.
S&F for Rotational moulded polythylene 1000 liters capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated alu rod & high density plastic ball complete all as specified
S&F in repair PVC valve less 10 liter capacity symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engr-in -Charge.
S&F in repairs 15 mm size PVC connection with PTMT nuts of 600 mm long.
S&F in repairs 15 mm size PVC connection with PTMT nuts of 450 mm long.
S&F in repairs 15 mm bore fancy type CP bib taps cast copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe.
S&F in repairs, 15 mm bore CP stop/angle valve cast copper alloy screwed down , high pressure with crutch or butterfly handle fancy type complete.
S&F in repairs Pillar tap 15mm chromium plated fancy type cast copper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed complete
S&F 110mm PVC (SWR) vent cowl
S&F 75mm PVC (SWR) vent cowl
M &L for preparing plastered or un plastered NEW surface of walls and applying two coats of Cement base paint and priming with alkali resistant priming paint on walls.(Externally)
M&L for applying 3 mm thick wall care putty and two coats of oil bound distemper on NEWLY plastered surfaces of wall including preparation of surfaces complete
M &L for preparing plastered or un plastered new surface of ceiling and applying three coats of white wash.
M &L for applying two coats of white wash on OLD SURFACES of ceiling including complete removal of existing treatment.
M&L for two coats of synthetic enamel paint on NEW WOODEN surfaces over a coat of pink primer to new surfaces including preparation of surfaces, over 10cm width or girth.
M&L for two coats of synthetic enamel paint on NEW STEEL surfaces over coat of red-oxide primer including preparation of surfaces, over 10cm width or girth complete all as specified and directed.
S&F in repairs Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded
M & L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165
M/S BEE ESS ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .