Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹19.8 L+₹29,303.40 (1.50%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹21.1 L+₹1.6 L (8.24%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹21.3 L+₹1.8 L (9.13%)Rejected-Finance MOHALLA KAMA KHAN WARD NO 07 HOUSE NO 88 DISTT POONCH J K | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹22.3 L+₹2.8 L (14.4%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹23 L
EMD Value
₹46,000
Closing Date
19 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 881 EWS C/o 56 APO
GE 881 EWS C/o 56 APO
SPECIAL REPAIR TO BLDG NO. T-5, T-10, T-12 T-17 AND PROVN OF RECEPTION CELL AT POONCH IN THE AOR OF AGE B/R-II UNDER GE 881 EWS
2022_MES_546730_1
GE/PNH-39/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 881 EWS C/o 56 APO
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE 881 EWS
₹46,000
Yes
31 Dec 2022
22 Aug 2022
26 Sept 2022
22 Aug 2022
19 Sept 2022
5 Sept 2022
Amount
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.
S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws complete all as specified and directed.
Dismantling mild steel work of any description complete all as specified and directed.
Supply and Fixing hand rails, half round or other stock section or core for wooden hand -rail, straight portion drilled and countrsunk for ballusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screqing etc. wind ties for roof including securing bolts, posts and struts in fencing including cuttings, tops to shapes, as directed, drilling, holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. fixed in repairs, and similar work conforming to Fe-250 Gde E-165 all as specified.
Dismantling timber scantling 40sqcm and over in section unframed work, as in any position etc , complete all as specified.
S&F mild steel rolled section in purlin, main and cross beam, rafter,posts etc. incl connected cleats, hold fasts etc of grade conforming to Fe 410-W (Gde E-250 quality A) complete all as specified and directed.
M&L for preparation of new steel & Iron surfaces, width or girth exceeding 10cm & apply two coats of synthetic enamel paint of 1st quality over a coat of red oxide zinc chrome complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Material & Labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistent exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces in camouflage pattern on walls complete all as specified and directed.
M&L for preparation of newly plastered / unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed.
Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.
M&L for walling of random rubble stone/boulder masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except stone, complete all as specified and directed.
M&L for precast cement concrete hollow block masonry of type 1:3:6 (16 mm graded aggregate as per IS 383) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.
M&L for 50 mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type C-2 (using 4mm graded crushed stone aggregate) as floor surface, complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 15mm thick screed bed in CM 1:4 , complete all as specified.
M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & complete 15mm thick rendering in CM 1:4 all as specified & directed.
Taking down chowkhats or frames with shutters exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutters from frame) complete all as specified and directed.
Taking down chowkhats or frames with shutters n exc 1.5 Sqm (without taking off shutters from frame) complete all as specified and directed.
M&L for plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
S&F flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and directed.
S&F Sheet glass, ordinary quality, 3mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified and directed.
S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
M&L for PCC 1:2:4, type, B-1 (using 20mm graded crushed stone aggregate), as in anchoring hold fast, bed plate etc, complete all as specified and directed.
M&L for Preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel 75 mm complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel 100 mm complete all as specified and directed.
S&F 100 mm of aluminium, anodised, barrel tower bolt extruded section and fixed complete all as specified and directed.
S&F 150 mm of aluminium, anodised, barrel tower bolt extruded section and fixed complete all as specified and directed.
S&F 100 mm long extruded aluminium alloy handles,cast type, fixed complete all as specified and directed.
S&F 150 mm long extruded aluminium alloy handles,cast type, fixed complete all as specified and directed.
S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and direted.
Demolition of cement concrete (reinforced) of any description and in any position (reinforcement cut as required to facilitate demolition), complete all as specified and directed.
M&L for RCC ,1:2:4 type B-0, using 12.5 mm crushed aggregate as in beams, cantilevers, bressumers, lintels over 1.5 m span and the like, complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc.Rough finished surfaces of concrete also splays between floors and beams, etc. complete all as specified and directed.
S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
S&F TMT bars 8 to 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically described complete all as directed by Engineer-in-Charge.
M & L for 25mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub base and flooring, etc. complete all as specified and directed.
M&L coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n.exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with & incl 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed.
All as per Item No. 45 above but in vertical surfaces such as skirtings, dados and risers to steps etc including 10 mm thick rending in CM (1:4) complet all as specified and directed.
M&L for 20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and and moulding the edges, complete all as specified.
M&L for Brick work with old size sub class ‘B’ bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:4, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1: 4 on brick work or concrete surfaces, chajja and suspended work finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 20 mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 20 mm thick rendering in CM 1:4 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of newly plastered surfaces and applying two coats of oil emulsion distemper complete all as specified and directed.
Material & Labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistent exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces on walls complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed.
Supply & Fixed double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot, made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
M&L for powder coated aluminium work including 5.5 mm glass sheet (minimum thickness of powder coating 50 micron) for doors, windows, ventilators and partitions (fixed portions) with extruded build up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, incl filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc, aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required incl cleat angle, aluminium snap beading for glazing/panelling, CP brass/stainless steel crews complete all as per architectural drawings and directed by Engr-in-Charge.
S & F mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.
S & F 75 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
M&L for chequered cement concrete tiles with grey pigment cement and pigments of size 30cmx30cmx25 mm thick,set, jointed and pointed in neat cement surry in floors including 20 mm thick screed bed in CM 1:4 for laying floor tiles complete all as specified and diected.
M/S Farooq Ahmed Bhat
Modh Hafiz Khan
JAMWAL CONSTRUCTION CO
M/S BADRI NATH GUPTA
M/s Anil Engineers & Builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .