1.REPAIRS AND RENOVATION OF PUMS_East Face_RCC BUILDING 3 CLASS ROOM at DENKANIKOTTAI TOWN PANCHAYAT-Rs.7.60lakhs 2.REPAIRS AND RENOVATION OF PUMS_South Face_RCC BUILDING at DENKANIKOTTAI TOWN PANCHAYAT-Rs.7.40 lakhs

Amount

1.REPAIRS AND RENOVATION OF PUMS( East Face) RCC BUILDING 3 CLASS ROOM @ DENKANIKOTTAI TOWN PANCHAYAT - Rs.7.60 lakhs

Towards chipping and roughening the concrete surfaces including all cost and conveyance of men and materials

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including

Towards clean removal of damaged plastering surfaces including all cost and conveyance of men and materials

Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Towards chipping and roughening the concrete surfaces including all cost and conveyance of men and materials

Paving the floor with kotta stone of size 610x610x 20mm cm 1:3 20mm thick

Dismantling of pressed tiles & weathering course including all cost and conveyance of men and materials etc/. All complete

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer

Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer

Painting two coats with approved Black Oxide for Old Black board

Supply and Delivery Fabrication of MSdoors and windows with outer frame andshutter frame in MS angle of size 40mmx 40mm x 6 mm with MS flat 25mm x25mm x 6mm and MS sheet of 18 gaugeincluding ventilating arrangements using20mm square MS rods with lockingarrangements including two coats ofapproved enamel paint over coat of redoxide including cost of angles, plates,sheets, fabrication charges, cost of holdfast and transportation charges etc.,complete. Supply of door size 1.20 x 2.10m - 1no

Supply of door size 1.20 x 1.30m

Labour charges for fixing door including cost and conveyence of all materials to site and labour charges etc completed.

Labour charges for fixing window including cost and conveyence of all materials to site and labour charges etc completed.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Towards attending repairs to doors

SD 13 Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point

SD NO 83 Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K-Lite) suitable for 11W CFL lamp with CFL

SD NO 142 Supply and fixing of 16A DP switch of 500V with metal clad with fuse and neutral (side handle) on suitable TW board with earth connection only

SD NO 110 Supply and fixing of 1400mm (56") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp

S.NO 15(E) 20 W LED TUBE LIGHT FOR T8 FITTING DOUBLE SIDE

Towards provision for Cupboard

Towards RWH

Towards Bala Paint

Provision for Name Board including all cost and conveyance

Provision for lock and key

2.REPAIRS AND RENOVATION OF PUMS( South Face) RCC BUILDING @ DENKANIKOTTAI TOWN PANCHAYAT - Rs.7.40 lakhs

Towards chipping and roughening the concrete surfaces including all cost and conveyance of men and materials

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including

Towards chipping and roughening the concrete surfaces including all cost and conveyance of men and materials

Paving the floor with kotta stone of size 610x610x 20mm cm 1:3 20mm thick

Dismantling of pressed tiles & weathering course including all cost and conveyance of men and materials etc/. All complete

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer

Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Painting two coats with approved Black Oxide for Old Black board

Supply and Delivery Fabrication of MSdoors and windows with outer frame andshutter frame in MS angle of size 40mmx 40mm x 6 mm with MS flat 25mm x25mm x 6mm and MS sheet of 18 gaugeincluding ventilating arrangements using20mm square MS rods with lockingarrangements including two coats ofapproved enamel paint over coat of redoxide including cost of angles, plates,sheets, fabrication charges, cost of holdfast and transportation charges etc.,complete. Supply of door size 1.20 x 2.10m

Supply of door size 1.20 x 1.30m

Labour charges for fixing door including cost and conveyence of all materials to site and labour charges etc completed.

Labour charges for fixing window including cost and conveyence of all materials to site and labour charges etc completed.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

SD 13 Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point

SD NO 83 Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K-Lite) suitable for 11W CFL lamp with CFL

SD NO 142 Supply and fixing of 16A DP switch of 500V with metal clad with fuse and neutral (side handle) on suitable TW board with earth connection only

SD NO 110 Supply and fixing of 1400mm (56") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp

SD NO 125 Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit

S.NO 15(E) 20 W LED TUBE LIGHT FOR T8 FITTING DOUBLE SIDE

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Towards RWH

Towards Bala Paint

Provision for Name Board including all cost and conveyance

Provision for lock and key

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Radhika Radha Krishnan

SR Enterprises