Supply of Hand Pump Spare Part and Hand Pump Set

Hand pump Spare Parts & Hand Pump Set (Estimated rates are inclusive of GST So interested bidders quote their rates by considering it.)

Single side sheilded Bearing (6204 Z) IS:15500

Handle for Deep well hand IS:15500

Nut Bolt m-12 X 40 mm IS:15500 with two nuts and washer

Head with Cover is IS:15500

Water Tank IS:15500

Stand Assembly Telescopic IS:15500 Part-4

Cylinder Body with Brass Liner isi Standared

Heavy Duty Rasing Pipe Vice (32 mm) Mechanical Squre Screw Type. (Plate type)

Heavy Duty Self Locking Rasing Pipe Vice (32 mm).

Lower Valve Assembly complete with check valve seat, check valve guide and ‘O’ Ring Suitable For Deep Well Hand Pumps

Third Plates IS:15500

Botton Die Bit With Holder M.12 x 1.75 P For 12 mm Threads Set

Brass Liner/Sleeve - IS:15500

Water chamber extender (w/o tap) length 12"

Water chamber extender (w/o tap) length 18"

Botton Die. Bit M.12 x 1.75 Only (Totam)

Upper Valve Only with Guide and Rubber Seating

12 mm dia Connecting rod 3 meter long IS:15500

chain with coupling for deep well hand pump IS:15500 diamond roller chain link

Sealing ring high quality nitrile rubber

Pump Bucket Nitril rubber high quality suitable For Deep Well Hand Pumps (ISI Standard)

Pump Bucket Leather high quality suitable For Deep Well Hand Pumps (ISI Standard)

Upper Valve Assembly Complete (with 2 N.R. Pump Bucket and Comprising Plunger Yoke Body Upper Valve Rubber Sealing Spacer and Follower) Suitable for Deep Well Hand Pumps. (Pistion)

Handle Axle for Deep well hand pump IS:15500

Cylinder Assly (Complete unit inclusive of stainless steel plunger rod 12mm dai with nitrile rubber pump bucket) suitablefor Deep Well Pump IS:15500

Reducer Cap 32 mm Dia CI ISI Standred

Chain high tensile nut with bolt M10 X 1.5X 40 IS:15500

Ball pein Hammer With Handle (1 Kg Approx)

Hacksaw Frame With six spare Blades , 300 mm

Pipe Wrench 600 Mm (Tapariya Make)

Pipe Wrench 300 Mm (Tapariya Make)

Crank Spanner M17 x M19

Cuttibg Plier Pakkad (Tapariya Make)

Double Ended Spanner M. 17 X 19 Flat

Pipe Wrench 900 MM (Tapariya Make)

M6 Ring Spanner M18 x 19 (10 mm to 12 mm)

Double Ended Spanner M.18 x 19 Flat (10 mm x 12 mm)

Scruw Driver (Tapariya Make)

Rod Coupling

Pipe Coupling

Kanas (File - 18 Inch)

I.S.I. marked deepwell handpump set (India mark II) confirming to I.S. 15500 completes with Head & handle assembly, water tank, telescopic stand assembly, cylinder assembly along with 12 nos. of 12mm x 3 mtr. Length MS electrogalvanised connecting rods made of bright bar and 12 nos. of hot dip galvanised riser pipes 32mm N.B. x 3 mtr. Long fitted with socket (made from seamless pipe or machined bar & galvanised) at one end and thread protector at another end.