Supply, Installation, Testing and Commissioning of Fire Fighting System to Drug and Pharmacy Store Block at SKIMS Soura

Amount

PIPING, HYDRANT, ACCESSORIES SYSTEM Providing, laying, jointing and testing of following sizes of pipes conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, flanges, rubber gaskets, nuts bolts, and washer. And fixing the pipe on floor / wall /ceiling with suitable size clamps, hangers, structural steel supports as per specification. And G.I. pipe sleeve to be provided wherever the pipes are crossing the walls/floors and sealing the sleeves as per consultant’s requirements including cutting holes and chases in brick, R.C.C work and making good the same to original conditions complete in all respects. Pipe shall be MS black as per IS-1239 heavy grade and fitting for 40 mm and below be of screwed fittings and above BW 'C' class fittings. Job includes Providing two coats of synthetic enamel paint of approved shade over a coat of primer. Including painting of legends both direction arrows as per the approval of the architects / consultants. For Fire System - M.S. `C' Heavy class pipe

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Main Ring/ Pipe (Underground) Providing, laying, jointing and testing in trenches the following sizes of M.S. class `C' (heavy class) pipes conforming to IS:1239 with accessories like fittings including tees, elbows, reducers, flanges, rubber gaskets, G.I. nuts, bolts and washers and providing 150mm thick fine sand layer all around the pipe, including excavation in all kind of soil/ hard rock, refilling, ramming and removing the excavated surplus material and making good the same complete as required, and providing anti corrosive treatment (coating and wrapping) with 4 mm thick anti corrosive tape as per IS :10221 complete as required. (for external works)

80 mm dia

150 mm dia

Orifice Plate Providing and fixing Orifice plate made out of 8mm thick stainless plate for pipe to reduce pressure up to 3.5 kg/sqcm complete in all respects

150 mm dia

Providing and fixing gun metal ball valve suitable for pressure 15 Kg/Cm2 and confirming to IS: 778 of the following size including providing necessary union / flange.

25 mm dia

Butterfly Valves Providing & fixing of butterfly valve suitable for pressure 15 Kg/Sqcm. with flanges, nut bolts & gaskets complete required.

80 mm dia

100 mm dia

150 mm dia

Non Return Valves Providing & fixing cast iron Slim seal double flanged dual type non-return valves (PN1.6) complete with matching flanges, rubber insertion, nuts, bolts and washer complete as required.etc. of following sizes.

150 mm dia

Supply, Installation, Testing & Commissioning of Single headed, Gunmetal ISI marked oblique pattern hydrant landing valve with 80 mm dia flange inlet and 63 mm dia instantaneous type female out let complete with gunmetal cap and G.I chain twist release type plug and all accessories as per IS:5290-1983

Providing & fixing swinging type First Aid hose reel in red color with 36 mts long and 20 mm dia heavy duty rubber water hose, 20 mm dia globe valve stop cock, terminating with G.M. coupling & nozzle of 5mm outlet with shut off valve confirming to IS 8090 - 1976 complete with drum and brackets for fixing on wall, bolts & nuts conforming to IS:884-1969 complete as required.

Controlled Percolating (CP) Hose. Providing & fixing Controlled Percolating (CP) Hose ISI marked (IS:8423) 63 mm dia x 15 m long complete with instantaneous type gunmetal 63 mm dia ISI marked Male & Female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire, bursting pressure not less than 22 Kg/Sqcm. (two nos. for each internal hydrant-valve)

Gun Metal Short Branch Pipe Providing & Fixing Gun-metal 63 mm dia short size branch pipes with 20 mm dia nozzle with 63 mm instantaneous coupling ISI marked (IS:903)

Fireman's Axe Providing and fixing standard fireman’s axe with heavy rubber handle.

Providing and fixing 4mm thick glass door with locking arrangement, suitable as per site requirement with anodized aluminum frame of size as per site requirement, with centre opening for fire hose cabinet. Suitable marked on the outside with the letters "FIRE HOSE" including locking arrangement. All aluminum work to be in Red P.O. color.

Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-14 / sq. cm

Sprinklers Providing and fixing Chrome finish quartzoid bulb sprinklers of size 15mm dia (Pendent / upright / side wall) to be Operated at 68 Deg C. Including two piece of adjustable C.P. Rosset complete as required.

Pendent through type

Upright through type

Side wall extended through type

Providing and fixing 25 mm dia inspection & testing assembly with gunmetal valve sight gas, valve & connected to drain line.

Sprinkler flexible pipe (UL Listed) Providing & fixing in the false ceilings, high pressure metallic hose with fittings (25 NB at one end for connection to pipe and 15 NB at the other end for the Sprinkler) for connecting the Sprinklers to Sprinkler piping system, Hose & Fittings to be UL listed or FM approved and installed in accordance with para 9.2.1.3.3 of NFPA-13 (2007 edition) Test Pressure 10.0 Kg/Sq.m

Length up to 700 mm

Length up to 1200 mm

Providing & fixing Electrically operated Flow indicating Switches with threaded connection for a minimum flow of 90 lpm for indicating water flow in sprinkler's branch line with necessary junction box installed complete with tee glands and other accessories as per specifications.

100 mm dia

Providing and fixing inlet breeching having C.I. body Two way gun metal 63 mm dia instantaneous inlets conforming to IS 903 fitted with non return valves, 25 mm dia gun metal drain cock, blank cap, brass chains and 150 mm dia flanges with all accessories suitable for local fire tender complete as required in Down Comer Riser

Providing & fixing Air Cushion tank (Air - vessel) 250 mm dia x 1.0 M high with dished top made of minimum 6 mm thick M.S Sheet pipe/ plate complete with 25 mm dia brass . Air Valve (Ball type) 25 mm dia stopcock. Nipple tees. Elbows and all accessories as required including fixing brackets.

seven seas contractors And traders

M/s Bhat Engineering Works

FAVOURITE ELECTRICALS

SKYLINE BUILDERS