REPAIRS TO JOINERY,FLOORING,SUNKEN FLOOR OF KITCHEN/TOILETS, PLASTERING, PLUMBING, SANITARY FITTINGS AND SERVICE TANK CLEANING ETC, AT SERVICE CENTRE AREA UNDER AGE B/R (SOUTH) NO-I OF GE (SOUTH) SECUNDERABAD

Amount

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each including steel windows etc complete all as specified and as directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

M&L for Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin type C-21 anodised and fixed complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm but n exc 4.00 sqm each incl steel windows etc complete all as specified and as directed.

S&F steel windows with pressed frame including side hung double shutters on both sides to receive glass on one side shutters and to receive guaze on other side shutters including hinges with steel handle on both side shutters and steel peg stay, complete with glazing bars, dovetailed or welded including making good distrubed portion of wall complete all as specified and as directed.

S&F steel ventilators with top hung/ side hung shutter including hinges, steel peg stay, including one coat of zinc chrome primer, including making good distrubed portion of wall complete all as specified and as directed.

S&F for Mild steel framed work such as grills, guard bars, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

M&L preparation of new steel surface of any description over 10 cm width and girth and appling two coats of synthetic enamel paint complete all as specified and as directed.

M&L preparation of new steel surface of any description over 10 cm width and girth and appling two coats of synthetic enamel paint over a coat of red oxied primer complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, complete all as specified and as directed

M&L for sheet glass ordinary quality 3 mm thick fitted with beeding/putty n.exc 0.5 sqm each complete all as specified and as directed.

M&L for sheet glass ordinary quality 4 mm thick fitted with beeding/putty n.exc 0.5 sqm each sheet glass is ground or obscured or frosted, on one side and fixed complete all as specified and as directed.

S&F in repairs for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,incl filling hollow of frame with plain cement concrete type C0 (1:3:6 )(using 12.5mm graded stone aggregate etc complete all as specified and as directed.

Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type C0 (1:3:6 )(using 12.5mm graded stone aggregate ,etc complete all as specified and as directed.

S&F for Factory made 35mm thick 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete, all as specified and as directed.

S&F Factory made 35mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass/gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass and gauge complete all as specified and as directed.

S&F 35 mm thick flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type complete all as specified and as directed.

S&F for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

S&F Mild Steel butt hinges 100mm long medium weight cold rolled mild steel etc complete all as specified and as directed

S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, complete all as specified and as directed

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F 300mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified and as directed.

S&F aluminium handles fabricated type, anodised, 150 mm size complete all as specified and as directed.

S&F in repairs floor door stopper of aluminium alloy body complete all as specified and as directed.

M&L Preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

S&F in Repairs 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13 sqcm but n exc 25 sqcm complete all as specified and as directed.

S&F in Repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc complete all as specified and as directed.

S&F hasp & staple 100mm size aluminium anodised fixed with screws.

S&F continous (Piano) hinges, mild steel, bright finished or electro galvanised width of flaps in 30mm complete all as specified and as directed

S&F in repairs 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and as directed.

Demolition of cement concrete (un-reinforced ) in ground floors and pavings not exceeding 15cm thick(below or above ground level ) .

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (12.50 mm graded stone aggregate ) as in floors complete all as specified and as directed.

M&L for 40 mm thick for PCC (1:2:4) type B1, (using 20 mm graded stone aggregate) as in flooring finished even and smooth using extra cement complete all as specified and as directed.

M&L for 75mm thick plain cement concrete in (1:3:6) type C1 (using 20 mm graded stone aggregate) as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Non - skid coloured Ceramic jointfree tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L for 18 to 20mm thick black Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window-cills, cooking plat-forms and like in cement mortar (1:4) incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite incl 20mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps, cooking platform etc.

M&L for 10mm thick vitrified light shade polished ceramic tiles,area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

Dismantling floor hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles of size 200x300x6mm thick wall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile over 10 mm thick plaster in CM 1:4 as in skirting / dados etc, complete all as specified and as directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dados etc. over 10mm thick rendering in CM (1:4) on walls such as backing of tiles complete all as specified and as directed by Engr-in-Charge.

M&L for 10mm thick vitrified light shade polished ceramic tiles,area of each tile not exceeding 0.36 sqm in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced ) exceeding 15cm thickness but above ground floors and similar works complete all as specified and as directed..

M&L for plain cement concrete 1:5:10 type E-2 using 40 mm graded stone aggregates as in floor filling complete all as specified and as directed.

Rendering 15mm thick in CM 1:3 using water proofing compound as per manufacture instruction finished even and smooth with out using extra cement as in sunken floor complete all as specified and as directed by Engr-in-charge.(Note: WPC will be measured and paid separately)

M&L for providing water proofing felt having glass fibre non woven reinforcement and weighing 3 to 4 kgs /Sqm in 100 mm overlaps both longitudinally and transversely by torch bonding over coat of hot blown bitumen 85/25 at the rate of 1.2 kgs per sqm as in sunken floor (bottom and vertical surfaces) complete all as specified and as directed

Supply only water proofing compound complete all as specified and as directed.

Taking down cement plaster from brick or stone walls, ceiling etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick works in cm 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified and as directed (Note: Water Proofing compound shall be measured and paid for separately)

M&L prepartion of new surfaces on walls and applying two coats of oil bound distemper over a coat of primer with wall care putty in two coats complete all as specified and as directed.

M&L perpartion of new plaster surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for applying two coats of cement base paint on new plastered surfaces of wall including preparation of surfaces over a coat of priming paint complete all as specified and as directed

M&L for making good of the fallen/broken portion of the RCC Roof/Ceiling /chhajja with proper reinforcement binding & application of antifungal paint for avoiding rusting of old steel reinforcement complete including preparation and appropriate OBD/Colour wash/cement base paint/ white wash etc complete all as specified and as directed

Demolition of brick work or stone masonry built in cement mortar, or cement lime mortar including all quoins, arches pillars etc.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6. complete all as specified and as directed

M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4. complete all as specified and as directed.

Dismantling water tanks exc 250 and n exc 500 Ltrs capacity of any type or size complete all as specified and as directed.

Dismantling water tanks exc 500 and n exc 1000 Ltrs capacity of any type or size complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 Litres including PTMT ball valve high pressure of 20mm complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres including PTMT ball valvehigh pressure of 20mm complete all as specified and as directed.

S&F in repairs 20 mm dia Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions complete all as specified and as directed.

S&F in repairs 20 mm dia Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed complete all as specified and as directed. (Min Wt 20mm- 210 gms)

S&F in repairs vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity,flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs Vitreous china wash hand basin white flat back size 550x400mm including brackets, CP pillar cock (fancy type )of 15mm bore, CP waste fittings 32mm, incl waste pipe complete all as specified and directed.

S&F in repairs Vitreous china orrisa pan squatting pattern 580 X 440mm with integral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacity complete all as specified and as directed by Engr-in-Charge.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity white , with inlet ball valve , float and handle including brackets , Flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs Plastic water closet seat, black or white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F in repairs 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.

S&F in Repairs 15 mm dia Pillar taps fancy type , brass chromium plated screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for iron pipe complete all as specified and as directed.

S&F in Repairs15 mm dia fancy type bib taps, brass chromium plated with capstan head, screwed down, screwed for iron pipe complete all as specified and as directed.

S&F 15 mm dia Stop valves, brass chromium plated, fancy type with capstan head screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F in repair 15 mm dia stop valves brass chromium plated with long shank (concealed), screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 15 mm dia angular stop valve brass chromium plated screwed for iron pipe complete all as specified and as directed.

S&F in repairs Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.

S&F in repairs brass chromium plated health faucets (Make : Hindware/Jaquar and parryware/Seiko) complete all as specified and as directed.

S&F in repairs 20mm dia CP decorative type draphery curtain rods with brackets of approved pattern and quality complete all as specified and as directed by Engr-in-Charge.

S&F in Repairs bathroom cabinet with door (size 400mm x 500 mm) fitted with looking mirror complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm.

S&F in repairs for stainless steel plate rack of size 1200x900mm of approved make and quality complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 15 mm dia steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, (concealed) complete all as specified and as directed.

S & F in repairs 20 mm dia steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, complete all as specified and as directed.

S&F in repairs 15mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 90 gms) complete all as specified and as directed.

S&F in repairs 15mm dia pillar tap of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 110 gms) complete all as specified and as directed.

S&F in repairs 15mm dia stop valves of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 90 gms) complete all as specified and as directed.

Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc from tanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capicity of tanks exc 250 & n exc 500 ltrs and recconneting ,air lock complete all as specified and as directed

Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc fromtanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capicity of tanks exc 750 & n exc 1000 ltrs and recconneting ,air lock complete all as specified and as directed

Demolition and breaking up drain AC pipes/PVC pipe set in cement mortar of any size complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 110mm complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 75mm complete all as specified and as directed.

S&F PVC (SWR) bends 110mm complete all as specified and as directed

S&F PVC (SWR) bends 75mm complete all as specified and as directed

S&F HDPE pipes or pressure rating 6kgf/sqcm of 40 mm dia fixed/concealed on walls or floors complete all as specified and as directed by Engr-in-Charge.

S&F in repairs HDPE pipes or pressure rating 6kgf/sqcm of 40 mm dia fixed/concealed on walls or floors complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm dia CP gratings complete all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as speficied and as directed.

ATUL ENTERPRISES

S.R.M.K Enterprises

BEEGEE DESIGN SYSTEMS