PROVN OF 02 X WC WITH 12 URINALS FOR ARMY AD RECORDS AND PROVN OF URINAL BLOCK NEAR SHORT RANGE OF ARMY AD CENTRE INCLUDING MISC E/M WORKS AT GMS

Amount

Surface excavation n exc 30cm deep and averageing 15cm deep and getting out in any type of soil .

Excavation in trenches not exc1.5m wide and not exc 1.5m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

M & L Plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as inColumns, pillars, piers, posts and struts complete all as specified and directed

Formwork to Square,rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in Chhajja complete all as specified and directed

M&L reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm complete all as specified and directed.

Returning, filling in any type of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing surplus excavated earth (soil) to a distance n. exc 50 m & depositing where directed at a level n. exc 1.5 m above the starting poin complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Mild steel TMT bars 8mm dia and over, cut to length, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item no.17 above but 5mmdia and over upto and including 10mm dia in stirrups,spacer and binders complete all as specified and directed.

M & L brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L 40mm thick PCC 1:2:4 damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth without using extra cement but using water proofing compound complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:4 on concrete surface of ceiling finishing even and smooth without using extra cement complete all as specified and directed.

M&L Moorum / Red bajri filling in floors or pavings, laid in layers n.exc15 cm thick spread levelled and rammed incl watering etc complete all as specified and directed.

M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8, type D2 using 40 mm graded stone aggregate as in sub base, sub floors, including use of formwork / screed strips to divided the area in panels complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in floors finished even surface complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth with out using extra cement complete all as specified and directed.

Forming contraction (dummy) joint 75mm deep X 10mm wide filled with sealing compoung Grade 'A', complete all as specified and directed.

M&L for 100mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base complete all as specified and directed.

S&F glazed ceramic colored tiles (Premium quality) 300x200x6 to 7mm thick coloured on vertical surface such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tile including rendering 15 mm thick on brick or stone masonry surfaces finished fair and even to recieve tile in CM 1 : 4 complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 20mm thick screed bed in CM 1 :6 complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat of white washon ceiling complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of white washcomplete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats colour wash over one coat of white wash complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:3 , mixed with water proofing compound, on concrete surfaces of roof , surface finished even and smooth. (supply only of water proofing compound shall be measured and paid seperately)

M & Lfor water proofing treatment for roof slabs including crumple joints by applying bitumen primer @ 0.3 ltr/sqm then applying bot blown 85/25 @ 1.20kg/sqm and laying APP modified bituminous 3mm thick with non oven polyester core water proofing membrane laid and bonded to the sub-strata by heat process, over lap shall be sealed by flame torch application not less than 3.2kg/sqm with over lap of 100mm and end lap of 150 mm and APP membrane shall be covered with bituminous based aluminium paing @0.2kg/sqm on top complete all as specified and directed.

Supply only water proofing compound of approved make.

S&F in repair Vitreous china bowl type Urinal flat back ,size 465x355x265 with grating and Union for discharge pipe including all necessary fittings complete all as specified and directed.

S&F Vitreous china wash down water closed pan ( Pedestal) white (exc flushing cistern & Pipe ) incl connection to trap and flushing pipe complete all as specified and directed.

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete all as specified and directed.

S&F EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour complete all as specified and directed.

S&F WHB cascad oval counter top WHB coloured 550 x 490mm complete all as specified and directed. make PARRYWARE code no.c0426

M&L Brick work with subclass 'B' bricks straight or curved on plan to any radius half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L for Granite slab (of any size) 20mm thick machine cut, bedded and jointed and pointed with white cement with addmixture of pigments to match the shade of granite including cutting,. Mirror polishing and edge rounded all as per specified for counter top WHB, Shelves and Cooking flatform, urinal partiation and stair case etc.complete all as specified and directed.

M&L Precast RCC 1:2:4 type B1 using 20mm graded stone aggregate in cover slabs set in cement mortar 1:6 including all necessary form work etc complete all as specified and directed. (Note : Reinforcement shall be measured and paid separately).

S&F 20mm dia GI tubing medium grade complete all as specified and directed.

S&F 15mm dia GI tubing medium grade complete all as specified and directed.

S&F 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts complete all as specified and directed.

S&F 15 mm fancy type concealed type stop valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed.

S&F 15 mm fancy type stop valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed.

S&F 15mm bore bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube complete all as specified and directed.

S&F health faucet with fluxi pipe and hand shower ,the length of hose 1mtr fitted to the tap complete all as specified and directed. Make JAQUAR Code no.563 or equivalent as approved by GE

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in repair PVC Service tanks complete all as specified and directed.

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI tube complete all as specified and directed.

All as per Item No. 56 above but 25 mm dia.

S&F PVC(SWR)75mm bore pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

All as per item no.58 above but 110mm bore

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) bend 110mm bore

S&F PVC (SWR) bend 75mm bore

S&F PVC(SWR) bend 110mm bore with access door

All as per item no.63 above but dut 75mm bore

S & F PVC (SWR) vent cowl, 100mm dia

S & F PVC (SWR) vent cowl, 75mm dia

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall pipe complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F PTMT waste coupling of 32mm dia for wash basin/urinal complete all as specified and directed.

S&F PVC LDPE waste pipe of pressure rating 6kg/cm2 of 32mm dia pipes complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L PCC 1:3:6 type C2 concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 200mm dia pipe complete all as specified and directed.

M&L 200mm dia salt galzed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 200 mm bore drain pipe complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing.

S & F Factroy made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with het moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuch inside with solvent cement for stiles and plan colour PVC sheets for top rail, lock rail & bottom rail on either side & as fap insert for top rial & bottom rail, Penelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F anodised glazed side hung door shutters with anodised aluminium frame of section of 100x44x2mm and bottom rail of 44.5x99x1.8mm including 5.5mm thick tinted sheet glass ordinary quality with all necessary suitable push & pull plate/handle , screw, jointing cleats, rubber packing aluminium snap beading and 1 No 200mm long Aluminium tower bolt, 100mm long 3 No Aluminium butt hinges B-21 Type and one No mortice brass lock 100 size 4 leaver (Vertical Type) with 01 No door closer Aluminium (Diie cast) body hydraullically regulated designation ;No 02 universal type, for each shutters complete all as specified and directed (Door shall be size approx 1.2mx2.1 in single leaf)

S&F powder coated anodised aluminium window and ventilator fixed type/sliding with 6mm thick acid texture approval design including necessary joining cleats glazing clips,rubber packing,anodised aluminium snap beading,screws etc complete all as specified and directed.

S& F in repair Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

M&L Cement concrete type C-2, 1:3:6 using 40 mm graded crushed stone aggreates 100 mm thick as in flooring finished even and fair complete all as specified and directed.

M&L 50 mm thick Sand cushning below interlocking paver tile.

Machine pressed precast concrete interlocking paver block any shape and size fixing with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade. complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring benching to drain, coping, bed block etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling & mass concrete. complete all as specified and directed.

EXTRA for forming fair finished channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and directed.

Excavation in trenches in soft / loose soil, not exceeding 1.5 metre wide & depth exceeding 1.5 metre & not exceeding 3.0 m deep; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan including getting out, complete all as specified & directed.

Supply,errect,test and commissioning of FIRE HOSE CABINET of size (approx) 800mm x 600mm x 250mm depth with hinged door shutter and frame and fabricated out of 18 SWG sheet steel fitted with 4 mm thick toughened glass (ISI MARKED) in the front including finishing with powder coated painting fire red outside and brilliant white inside complete all as specified and directed . NOTE: The rate shall be inclusive of all loose items / accessories as mentioned which shall be fitted inside the cabinet.

Supply only Hydrant canvas hose pipe 63 mm dia and 30 m long with 63mm size male coupling at one end and female coupling at the other end with 63 mm brass nozzle (ISI marked) complete all as specified and directed. Make: Newage,Jayshree,CRC,GEI

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, with aluminium conductor 1100 V grade, laid in trenches/ along poles, ducts or through sleeve for size 10 Sqmm 2 core complete all as specified and directed (connection from Tech Block Panel board) : - Note: Earth work, sand cushioning and bricks will be measured and paid separately under relevant items Make:- Havells / polycab / cci / nicco / Gloster

Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.

Supply and laying flyash building bricks laid in trenches for LT cable protection with length of brick perpendicular to length of cable complete all as specified and directed.

Boring across the road/hard surface horizontally with machanical boring equipments not less than 50 mm bore dia complete all as specified and directed.

S&F MCB SPN 6-32 Amps complete with necessary elect connections all as specified at the exisitng DB with two way DB Enclosure with necessary elect connections complete all as specified and directed.

S&F Galvanised steel tubing 40 mm bore light grade including all fittings, laid in trenches , fixed to walls or on poles etc after taking out the rusted out/wornout pipes complete all as specified and directed

M&L for point wiring with cable PVC insulated but unsheathed, 1.5 Sqmm, stranded copper conductor in and including PVC concealed conduit incl continuous earthing with cable PVC insulated 1.5 Sq mm copper conductor, MS box , including laminated top sheet cover,washer & screw complete all as specified and directed.for the following (a) One light point controlled by one, one way switch.

(b) One exhaust fan point controlled by one, one way switch.

S & Fix switch piano (Flush type) 5 amps, 240 Volts, single pole one way.

S& Fix ceiling rose, bakelite three terminal

Supply & fix LED tube light along with fixture,18W complete all as specified and directed

S & Fix sheet metal enclosure double door MCB DB, SPN 4 way complete all as specified and directed.

M&L for GI tubing 25-32mm dia medium grade, mounting bracket and end nipple/nozzle of the bracket of size suitable to house the light fittinhg , with its Galvanised Flat Iron clamps with suitable set of nuts, bolts, washers etc complete all as specified and as directed

S & F street light fitting LED type of 20 watt New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs (8x2.5 HPLED/LS) as light source and electronic driver complete all as specified & directed . Make C&S / WIPRO / Bajaj / Phillips / Havells Note : warrenty of PCB @ 3years)

S & F MCB SPN 6-20 Amp 10 KA 240 Volts

S & F MCB, SP 6 to 10 Amp 240 Volts rating

S & F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed

S&F PP-R 3 layer polpropylen random copolymer concealed pipes SDR- 7.4 (PN- 16) un Stabilized and antimicorbial fusion welded having thermal stability for hot & cold water supply all PPR plain & brass threaded polypropylene of size 32 mm dia (OD) and random fittings laid in trenches 40 mm bore

S& F of PP-R gate valves (Brass inlet) as per requirement of size 32 mm dia complete all as specified and directed.

Making connection of PP-R distribution branch with PP-R main of Size 32 mm OD by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.

M & L for construction of brick masonry valve pit chamber of size 600mm x 600mm x450mm including necessary excavation and earth work in any type of soil in CM (1.4) complete with valve pit cover (steel) with locking arrangement complete all as specified and directed.

S&F PP-R 3 layer polpropylen random copolymer concealed pipes SDR- 7.4 (PN- 16) un Stabilized and antimicorbial fsion welded having thermal stability for hot & cold water supply all PPR plain & brass threaded polypropylene of size 25 mm dia (OD) and random fittings laid in trenches complete all as specified and directed.

S& F of PP-R gate valves (Brass inlet) as per requirement of size 25 mm dia complete all as specified and directed.

Making connection of PP-R distribution branch with PP-R main of Size 25 mm OD by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.

M/s Ats Electricals

M/S SIWALIK AND CO

M/S. KISHAN ENGINEERING

DHABALESWAR ENGINEERING WORKS

M/S S.K GHOSE

M/s MAA BHAIRABI ENTERPRISES

R K Traders