Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.8 LAccepted-AOC | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹13.3 L+₹83,693 (6.70%)Rejected-AOC 33 A DURGA NAGAR AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹13.4 L+₹91,070 (7.29%)Rejected-AOC 1291 1ST FLOOR SECTOR 26 PANCHKULA HARYANA 134116 | PANCHKULA | HARYANA | 134116 | L3 | Rejected-AOC Other than the lowest bidder | |
| 4 | L4₹14.0 L+₹1.5 L (12.0%)Rejected-AOC | L4 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
9 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) JUTOGH
GE (I) JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
COMPREHENSIVE MAINTENANCE FOR VARIOUS BLDGS IN THE AREA OF JUTOGH CANTT UNDER GE (I) JUTOGH
2023_MES_613549_1
GE(I)/JUT-61 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
JUTOGH
CLASS E CATEGORY a (i)
6 documents required · 6 mandatory
₹500
GE (I) JUTOGH
₹30,000
Yes
18 Oct 2023
12 Aug 2023
11 Sept 2023
12 Aug 2023
9 Sept 2023
26 Aug 2023
12 Aug 2023 - 16 Aug 2023
Amount
Demolition of Stone slabs and tiles of any description or thickness laid,bedded and pointed in any mortar in floors, aprons, cooking platform etc. complete all as specified and directed.
M&L for machine cut Granite slab 15 mm thick as in steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as specified and directed. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing,complete over and including 15 mm thick screed bed or bedding with CM 1:6 ,etc complete all as specified and directed. Note:- (i) The rate of kota stone shall be deemed to incl for full rounded off corner/ edges incl holes for pipe all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and kota polishing to achive the desired granite finish.
M&L for machine cut kota stone slab 20-25mm thick in riser steps,skirting,dado , nosing and pillar over 10mm thick cement screed base laid with CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing,etc complete all as specified and directed. Note:- (i) The rate of kota stone shall be deemed to incl for full rounded off corner/ edges/nosing incl holes for pipe all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and kota polishing to achive the desired finish.
Taking down cement or cement lime plaster, of any description incl tiling etc complete all as specified and directed.
M&L for rendering 15 mm thick in cm (1:6) on brick work or concrete surfaces finished even and smooth complete all as specified and directed.
M&L for rendering work 15 mm thick on fair surfaces of brickwork or concrete surfaces (1:4) finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a one coat of birla white putty 1-2mm thick on walls complete all as specified and directed.
M&L for application of Alltech spray dune Rady mixed product having natural stone granules in particle size 400-600, 600-800, 800-1000 and 1000-1200 microns consisting excellent synthetic binder, anticracking etc, in single coat 1.2 to 1.5 mm thickness directly over the plastered walls with trowel over a coat of allket base coat of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed.
Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets complete all as specified and directed.
S&F GI metal suspended ceiling system OREO GI lay in plain of make DEXUNE / HUNTERDOUGLS / LINDER 600 x 600x 0.5mm (TEGULAR) Edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. the tiles should have humidity resistance of 100% with light reflection of 62%, and incl necessary scaffolding of any heigh etc complete all as specified and directed. Note: (i) To comprise main runner spaced at 1200mm centres securly fixed to the structural soffit at 1200 mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer tahn 600mm require independant support. 600 x 600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450mm maximum centres (ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.5mm x 25/5 with soffit cleat made of galvanised steel of size 27 x 37 x 25 x 1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire
M&L for solid PVC as in use wall/ceiling lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as pe specifications and drawing incl necessary beading work, incl same board beading for joint sealed complete all as specified and directed.
Dismantling timber scantlings in any position in fillets, rails, posts, rafters , purlins, etc. under 40 sq. cm in section (Unframed work) complete all as specified and directed.
M&L for plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 13 sq.cm and not exc 25 sq.cm ,incl paintings complete all as specified and directed.
Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height complete all as specified and directed.
M&L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed.
M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan to any radius in half brick thick wall built complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed.
S&F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap fixed with with coach screws and washers, in roofs, walls etc. with grade of Zinc coating 120 GSM complete all as specified and directed.
S&F 0.63 mm thick plain galvanized mild steel plain sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of Zinc coating 120 GSM, bent to shape as required, fixed with coach screws and washers in roofs facia and wall etc, complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ clading to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall,eaves board fixed, facia with self tapping screws complete all as specified and directed.
Dismantling timber scantlings, framed/unframed work of size 40 sqcm and over in section, in any position in any position with nails etc complete all as specified and directed.
M&L for IInd class HW clean Sawn timber scantling/ posts, incl 'ATT' during before fixed to structure complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified.
S&F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, anfle, channel or flat sections) including distance pieces cleats Fe 410-W (Gde-E- 250) quality-A etc complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.,with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladder; framed baluster; walk ways; railing; framework of watertanks staging and similar work conforming to Fe-290. Gde-E-165, complete all as specified and directed.
M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F 9mm thick in 5 layer Plywood, grade BWR,type BB, fixed with screws to timber frame work etc complete all as specified and directed.
S&F 0.9mm thick decorative laminate(mica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
shiv const co
NSK TRADER
M/S Meera Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .