Lighting arrangement work in the development authority office premises.

Amount

40 Watt. Post Top Fixture Ornamental LED Post Top Luminaire made of aluminium housing duly powder coated/ PU painted with PC/ PMMA Clear prismatic diffuser with turdy Triple arm. MCPCB having high Lumen LED’s are mounted on aluminium heat sinks. (Five Year guarantee of the material will be of the contractor from the date of completion of the work, and for this no extra payment will be paid) Make:-Polycab, Havells, Bajaj, Jaguar, twinkle, Osram.

Supply & fixing of 12.50 mtr High mast shaft of approved make with rising hot dip glavanised inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. SI.NO.651/SOR-18 Make:-Polycab, Havells, Bajaj, Jaguar, twinkle, Osram.

Supply and fixing of factory wired integral LED Flood light luminaries with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt.Confriming to IP 66 Protection complete in all respect. CAT-AAA. SI.NO.1455/SOR-2018. Make:-Polycab, Havells, Bajaj, Jaguar, twinkle, Osram.

Supply and fixing Following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.PWD 2018/ 807, 25 AMP (E-ii)

Supply and laying of aluminium conductor PVC insulated armoured served sheahed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75mm.thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S.clamps etc.of suitable size or as directed by the engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SOR-2018/501 (H) 10 sq.mm 4 core. Make:-Polycab, Havells, KEI, SPM, Finolex.

Supply and burring of Safe Earthing Electrode T-19,(Hot Dip Galvanized) Length up to 3000mm, outer pipe 48.4mmx3.2mm inner pipe 26.9mmx2.6, terminal Dia 12mm coating 80-100 micron filled with crystalling conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of reataining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25x3 G.I. Strip will be extra) Make: AS approved in U.P. P.W.D., & C.P.R.I. Certified. (P.W.D 726 B/18)

Painting of Pole.

S/F of 1.5 sq. mm PVC round sheathed multi core flexbile copper cable. (Analysis rate)

S&F of 6 Amp to 32 Amp S.P.M.C.B.(10K) C Curve SOR No 1002/2018

S/F of plain/pin type copper tin plated cable socket (Lugs) to the cable lead insulating with tape and making connection etc. complete in all respect. SOR-504/2018 (i) (d) 16 sq. mm

S/F of HDPE ( DWC ) pipe for road crossing etc. at depth of 900 mm below ground level for H.T. cable as cable carrier as per E/I. (make Dura-line or Reck).PSR 90/76mm ( OD/ID )

Supply & erection of overhead line with G.I. wire No. 8 to 4 SWG on poles/service bracket including binding etc. complete in all respect.628/2018

M/S GARG ASSOCIATES (BID ID -4861304)