8121/SAR-52/E8 PAINTING AND REPAIR TO FENCING /GATES ETC AT AF STN SARSAWA UNDER GE (AF) SARSAWA

Amount

Materials and labour for preparation of old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Materials and labour for preparation of old painted wooden Surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint complete all as specified and directed.

Materials and labour for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth including CGI sheet in roof/wall and applying one coat of synthetic enamel paint in Camouflague pattern or plain pattern complete all as specified and directed.

Materials and labour for preparation of old painted steel and iron Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying one coat of synthetic enamel paint complete all as specified and directed.

Materials and labour for preparation of old painted RCC Post and concrete surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint in Camouflague pattern or plain pattern complete as specified and directed.

Materials and labour for preparation of old painted RCC Post and concrete surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying one coat of synthetic enamel paint complete all as specified and directed.

Materials and labour for preparation of old painted stone, concrete, asbestos sheet and plasered Surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of Plastic Emulsion Paint (exterior grade) complete all as specified and directed. Note Applicable for Srl item No 01 to 07 :- The rate quoted by tenderer is deemed to included in item for painting any type of Bldgs for married/OTM accn , stores, all type fencing/Gates including any height and width at AF Stn Sarsawa shall be made good by contractor without any extra cost to the Govt.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work etc of any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Materials and labour for Excavation in post holes each not exc 0.5 cum and getting outin soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplush soil to a distance n exc 50m and making good surface complete all as specified and directed.

Materials and labour for PCC 1:3:6 Type C2(40 mm graded aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed.

Supply and fixing mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including necessary welding where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290) complete all as specified & directed.

Supply and fixing mild steel round bars 10 mm dia and over, fixed to fencing posts as in tie bar including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Grade E-165 (Fe 290) complete all as specified & directed.

Supply and fixing Mild steel screw bolts, dia of Neck 5mm to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long complete all as specified and directed.

Dismantling structural steel work including door /gate , frame ,trusses compete all as specified and directed.

Materials and labour for rolled mild steel work as in aerial masts, stair,gate,frame work , staging for water tanks and the like including caps, bases, splices etc channel sections or angles with plates, including all lattice bars, stiffeners, gussets plates, etc.Fe- 290 (Gde E-165) quality 'A' complete all as directed.

Supply and fixing Rolled mild steel Framed work as in doors or gates of angle or other section confirming to Fe-410-S with gusset plate , rails braces etc. complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or slinding with and including either hooks hinges and rollers for slinding gates, guide rail of MS flat and framing required for fixing of rollers, pintle hinges, locking arrangement as required and hanging also fastening and fixing complete using Fe- 290 (Gde E-165) quality 'A' complete all as specified and directed.

Materials and labour for painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces complete all as specified and directed.

Dismantling fencing wire mesh of any type complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire complete all as specified and directed.

Restraining & resecuring the old chain link fencing in position including making good stable etc and provision birding complete all as specified and directed.

Dimantling galvanised steel barbed wire of any description complete all as specified and directed.

Supply & Fixing Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Fixing only including restraining & resecuring the old Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed including making good stable etc complete all as specified and directed.

Supply and fixing in repair Punched tape concertina coil 600/1000mm dia or any other coil size of any type of standards,rails etc including provision of mild steel(annealed) binding wire complete all as specified and directed.

Materials and labour for preparation of old plastered surfaces of wall & applying one coats of Apex paint of Make - Asian Paint or equivalent in Camouflague pattern or any other approved pattern complete all specified and directed.

ANKIT KUMAR

DHIMAN ENGINEERS & BUILDERS

NAVEEN KUMAR TYAGI

RADHA ENTERPRISES