SPECIAL RPAIRS TO BLDG NO. P-16 AT ALGARAH, SPECIAL REPAIRS TO SUBSTATION AT PEDONG, PROVN OF ROOF AND HARDSTANDING FOR MT VEHICLES AT ALGARAH AND PROVN OF DOORS AND WINDOWS FOR BLDG NO. D-3 AT DALAPCHAND UNDER GE 867 EWS

Amount

Surface excavation not exceeding 30cmdeep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, laying of cable etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exceeding 10 sqm on plan and getting out in soft/loose soil all as specified and directed by Engineer-in-charge.

M&L for Plain cement concrete 1:4:8 mix type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge.

M&L for Plain cement concrete 1:5:10 mix type E2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge.

M & L for modular fly ash bricks as in brick work straight or curved on plan exceeding 6m mean radious built in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even complete all as specified and directed by Engr-in-charge.

M&L for reinforced cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns etc., all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc., all as specified and directed by Engineer-in-Charge. Note for Item No. 7 & 8: Formwork and reinforcement shall be measured and paid seperately.

Use and removal of steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete flat all as specified and directed by Engineer-in-Charge.

Use and removal of steel formwork to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete all as specified and directed by Engineer-in-Charge.

M&L for Mild steel deformed TMT bars 10mm dia and over as in reinforcement to concrete cut to length bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge.

M&L for Mild steel deformed TMT bars 8mm dia as in reinforcement to concrete cut to length bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge.

M&Lfor Mild steel deformedTMT bars 5mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed by Engineer-in-Charge.

M&L for Hardcore with Broken stone/boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed by Engineer-in-charge.

M&L for 100 mm thick Plain Cement Concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer complete all as specified and directed by Engineer-in-charge.

M&L 100 mm thick PCC 1:2:4, type B2 (using 40mm graded stone aggregate) as in path, hardstanding etc., laid in alternative bays finished by brooming complete all as specified and directed by Engineer-in-Charge.

Forming 65 mm deep x 10 mm wide construction (Dummy) joint filled with sealing compound grade A complete all as specified and directed by Engineer-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated/trepizoidal profile steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa (pitch of corrugation shall be 200mm to 250mm and crest shall be 28mm to 32mm) as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engineer-in-Charge. Make for Item No. 18&19: TATA BLUESLOPPE/ LLYODS /JMBS/EVEREST INDUSTRIES LTD/CRILL or equivalent as approved by GE.

S&F Fe 410-W (Gde-E- 250) quality-A Rolled steel sections, as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and directed by Engineer-in-charge.

S&F Fe 410-W (Gde-E- 250) quality-A rolled mild steel plates (plain or chequered), as in base plates etc., square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed by Engineer-in-charge.

M&L 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 6 mm wide grooves to full depth at 2m to 3m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed by Engineer-in-charge.

Removing surplus excavated soil to a distance not exceeing 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new or previously un treated surfaces of steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. Make: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/NEROLAC/IEL

M&L for preparing newly plastered surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-charge. Make: LOVELYCEM/ SURYACEM/ JANATHACEM / LUCKYCEM or equivalent make as approved by GE.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting windows into door openings, etc., or cutting out defective brickwork for under - pinning, including providing,fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc., to store and rubbish not exc. 50m add if brick wall built in cement mortar or cement lime mortar complete all as specified and directed by Engineer-in-charge.

S&F Anodised aluminium frame for partitions, doors, windows ventilators with one or more rebates, grills including joining cleat for fixing etc., complete all as specified and dierected by Engr-in-Charge.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, bubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150mm long (1 No.), Hinges type B-21 100mm (2 Nos) 125mm handle (1 No.) in each shutter complete all as specified and directed. Make for Item No. 28&29: JINDAL/INDALCO/HINDALCO

S & F 4mm thick sheet glass ordinary quality fixed in aluminium windows area not exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. Make:- TRIVENI/ SAINT GOBAIN/ MODIGUARD/ATUL/ HINDUSTAN or equivalent as approved by GE.

S&F 105x60 mm size pressed steel door frame for doors made of 1.25mm sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including PCC 1:3:6 type C0 filling complete all as directed by Engr-in-Charge. Make: -B A Enterprises/Multiwyn/Doorwyn/Modern fabricator/Madhu industries/Ajanta Ispat/Alusys or equivalent as approved by GE.

S&F 35mm thick factory made flush shutters, solid core construction with block board core and plywood face panels, commercial type on both faces complete all as specified and directed by Engineer-in-Charge. Make: - Green Ply/Archid Ply or equivalent as approved by GE.

S&F 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed.

S&F 150 mm long Aluminium alloy handles cast type anodised all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150mm all as specified and directed.

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp & staple (bolt type) and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. Make for Item No. 33 to 36: - CROWN/ CLASSIC/ JYOTHI/ AMIT/ MOWJEE/ARGENT/Bharat/Alans/Hettich/Everlite or any ISI marked make as approved by GE.

M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge. Make: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON / IEL/NEROLAC/IEL

Roughening of surfaces, and cleaning the top surface of RCC slab using wire brushes and water to remove all dust and loose particles etc., removing the rubbish out side MD land complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in padding concrete complete all as directed by Engr-in-Charge.

Rendering 10mm thick in cement mortar 1:4 on concrete surfaces of roof as water proofing treatment finished fair and even including mixing of liquid water proofing compound in the mortar as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge. Note: - Supply only liquid WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as directed by Engr-in-Charge. Make:- SCOTT NO 1/ ACCOPROOF/ RALLA/SIKA/FOSROC

M&L for water proofing treatment with 3 mm thick APP modified membrane weighing not less than 3Kg/Sqm reinforced with non woven polyester matt weighing not less than 150 Gram/Sqm having softening point not less than 140 degree Celsius, longitudinal tensile strength not less than 300 N per Sqm, tearing strength of 180 N , laid after applying a coat of Bitumen Emulsion, Primer @ 0.20Kg / Sqm over the thoroughly cleaned surface to be water proofed. Membrane shall then be laid with 10 cm side overlaps and ,15 Cm end laps completely thermo fused by flame torch application as per manufacturer's instructions. Care shall be taken to avoid wrinkles while sticking the membrane on the bitumen surface . A coat of hot blown bitumen 90/15 shall be applied on top of the membrane @ 1.20 Kg/Sqm and finally finished with solar reflective aluminium paint @ 0.10 Kg/Sqm. The water proofing membrane shall be extended up to a height of minimum 30 cms on wall and inserted by cutting groove and filling with bitumen all as specified and directed by Engr-in-Charge. Make: (a) M/s STP Superior poly plus by STP Ltd. Calcutta. (b) M/s Hyperplas by IWL Chennai. (c) M/s Multiplas by STP Texes Ltd,Goregoan (d) M/s Shivam Tar Products

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc. 6m mean radius built in cement mortar l:6 including demolition of existing brickwork complete all as specified and directed by Engineer-in-Charge.

M&L 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in sub base finished even and rough to receive toping layer including demolition exiting concrete and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete chequered tiles 300 x300x 25 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in grey cement to match the surfaces as in floors over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Make: NITCO/DECO/BHARAT or equivalent as approved by GE.

M & L for 40 mm thick plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floor and the like laid in alternative bays in panels, and finishing cement concrete surface even and smooth with using extra cement complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in surface channels, drains including fair finishing inner surface of drain or channel using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, colums, beams, etc., including demolition of existing concrete complete all as specified and directed by Engineer-in-Charge. Note: Formwork and reinforcement shall be measured and paid seperately.

Use and removal of steel formwork to soffits of slabs etc., for rough finished surfaces of concrete flat all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement including taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even including waterproofing compound @ 3% by weight of cement as per manufacturer's instructions including taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered/unplasterd white washed surfaces of walls and applying two coats of white washing complete all as specified and as directed by Engineer-in-Charge. Make: LOVELYCEM/ SURYACEM/ JANATHACEM/ LUCKYCEM or equivalent make as approved by GE.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over one coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated surfaces of walls and applying two coats of cement based paint complete all as specified and directed by Engineer-in-Charge. Make for Item No. 53&54: INDOCEM/ SUPERSNOWCEM/ AQUACEM/ DURACEM

Dismantling wood, steel or RCC fencing posts embedded in concrete, any section, including taking out embedded portion all as specified and directed.

Excavation in post holes (for similar holes) each n.exc 0.5cum, getting out, and removing surplus soil to a distance n.exc 50m and making good surface, in soft/ loose soil all as specified and directed.

M&L for plain cement concrete 1:3:6 mix, type C2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

S&F Fe-290 Gde E-165 mild steel angle or other sections as in posts and struts in fencing etc., and similar work including cutting tops to shape as directed,drilling holes, notching for wire, including all necessary drilling holes for bolting or riveting, etc., all as specified and directed by Engineer-in-charge.

S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm to 100mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., including dismantling old rusted barbed wire all as specified and directed.

S&F MS galvanised chain link fencing of mesh size 50 x 50 mm, 3.15 mm dia wire fixed to any type of standards, rails, posts, straining bolts etc., including provision of binding wire including dismantling of old fencing wire mesh any type complete all as specified and directed by Engineer-in-charge.

S&F Mild steel bar round bars 10 mm dia and over in fencing line bars, cut to length, bent to shape required including cranking, bending, hooking ends and binding etc. conforming to grade I, IS-432 (Part I) all as specified and directed.

S&F mild steel machine made screw bolts not exceeding 5cm long 11 to 15 mm (diameter of neck) with hexagonal or square heads at one end and screwed the other, screwed end fitted with washers and one hexagonal or square nut, all as specified and directed.

S&F Fe-290 Gde E-165 Rolled mild steel sections as in framed work for cattle traps, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings & hanging; also fastening & fixing including dismantling existing gates etc., complete all as specified and directed by Engineer-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated/trepizoidal profile steel sheet 0.50 mm thick (0.45 mm BMT) of any colour having tensile strength of 550 Mpa (pitch of corrugation shall be 200mm to 250mm and crest shall be 28mm to 32mm) as in roof covering/ cladding to wall fixed with self tapping screws including taking down existing steel sheetng of any type complete all as specified and as directed by Engineer-in-charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick (0.45mm BMT) of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws including taking down existing steel sheetng of any type complete all as specified and directed by Engineer-in-Charge. Make for Item No. 64&65: TATA BLUESLOPPE/ LLYODS /JMBS/ EVEREST INDUSTRIES LTD/CRILL or equivalent as approved by GE.

M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth (other than in roof) and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth of CGI sheet in roof etc., and applying one coat of synthetic enamel paint (Corrugal) complete all as specified and directed by Engineer-in-Charge. Make for item No. 66&67: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL

S&F Fe 410-W (Gde-E- 250) quality-A Rolled steel sections, as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., including dismantling existing steel work complete all as specified and directed by Engineer-in-charge.

M&L for false ceiling with light weight PVC hollow section panels made of 1mm thick PVC sheet and overall thickness of panel minimum 7mm and 200mm wide strips fixed in and including GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including taking down existing ceiling boards of any type complete all as specified and as directed by Engineer-in-charge. MAKE: Rajshree plast wood/Sintex/Nandi or equivalent as approved by GE.

M&L for second class hard wood clean sawn scantling, unframed and fixed including taking down existing scantling complete all as specified and as directed by Engineer-in-Charge. WOOD: Sal/Kalasiris/Chaplash/Hollock/Bijasal

M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of creosote oil complete all as specified and directed by Engineer-in-Charge.

M & L for modular fly ash bricks as in brick work straight or curved on plan exceeding 6m mean radious built in cement mortar 1:6 including demolition of existing brick work complete all as specified and directed by Engineer-in-charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even including waterproofing compound @ 3% by weight of cement as per manufacturer's instructions complete all as specified and directed by Engr-in-charge.

M&L for M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of primer over thin layer of wall care putty (Birla white/Berger/Asian) complete all as specified and as directed by Engineer-in-Charge. Make: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.5 Sqm and not exceeding 4 sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good in PCC 1:2:4 type B1 or cement mortar 1:4 (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good in PCC 1:2:4 type B1 or cement mortar 1:4 (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge. Make for Item No. 78&79: -B A Enterprises/Multiwyn/Doorwyn/ Modern fabricator/Madhu industries/Ajanta Ispat/Alusys/AVA steels or equivalent as approved by GE.

S&F Mild steel works as in grills, framed guard bars, and similar works conforming to Fe-290, Gde E-165 all as specified and directed.

S & F 3mm thick sheet glass ordinary quality fixed with oil putty and necessary clips/nut bolts or beads area not exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. Make: TRIVENI/ SAINT GOBAIN/ MODIGUARD/ATUL/ HINDUSTAN or equivalent as approved by GE.

S & F galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples or wooden beeds all as specified and directed. Make: -Kamal/Shalimar or equivalent as approved by GE.

S&F 125x60 mm size pressed steel door frame for doors made of 1.25mm sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including PCC 1:3:6 type C0 filling complete all as directed by Engr-in-Charge. Make: -B A Enterprises/Multiwyn/Doorwyn/Modern fabricator/Madhu industries/Ajanta Ispat/Alusys or equivalent as approved by GE.

S&F 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels, commercial type on both faces complete all as specified and directed by Engineer-in-Charge. Make: - Green Ply/Archid Ply or equivalent as approved by GE.

S & F 30 mm thick second class hard wood Glazed and skeleton shutters for doors, open rebated and prepared to receive glass,gauze etc. divided in to squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass, wire gauge etc. ; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats all as specified and directed. Timber:- Sal/Kalasiris/Chaplash/Hollock/Bijasal

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed. Make: - CROWN/ CLASSIC/ JYOTHI/ AMIT/ MOWJEE/ARGENT/Bharat/Alans/Hettich/Everlite or any ISI marked make as approved by GE.

S&F 20mm dia tubular curtain rod/towel rail brass chromium plated with fixing brackets, stops, rollers etc., including taking down existing curtain rod all as specified and directed.

S&F 20mm dia end brackets for curtain rod/towel rail, brass chromium plated all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm,on vertical surfaces such as skirting, dados, raisers to steps etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick screed bed in cement mortar 1:4 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge. Make for Item No 89&90: NITCO/ SOMANY/ ASIAN / JOHNSON/KAJARIA/ORIENT BELL

M&L for cement concrete chequered tiles 300 x300x 25 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors over and including 20 mm thick screed bed in cement mortar 1:6 including demolition of existing tiles and removing rubbish off the premises complete all as specified and directed. Make: NITCO/DECO/BHARAT or equivalent as approved by GE.

M&L for 75 mm thick Plain Cement Concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer including demolition of existing sub base and removing rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M&L for reinforced cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels exceeding 1.5 m span etc., including demolition of existing beams and removing rubbish off the premises all as specified and directed by Engineer-in-Charge. Note: Formwork and reinforcement shall be measured and paid seperately.

Use and removal of steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., for rough finished surfaces of concrete flat all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping, medium grade of suitable size with all necessary fittings, fixed on walls/ceilings etc., including 1.5 Sq mm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type/surface type for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover (Make: Hylem or equivalent ) for housing switches, socket outlet, regulator etc., for one light /fan point controlled by one switch/one bell / buzzer point controlled by one bell push/one 3 / 5 -pin switch socket outlet 5 amps on independent board including taking down existing unserviceable point wiring including switches, sockets, regulators, ceiling roses, terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge.

All as per item No. 95 above but for One 3/5 pin switch socket outlet 5 amps on same board along with other switches complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 2.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping, medium grade of suitable size with all necessary fittings, fixed on walls/ceilings etc., including 2.5 Sqmm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type/surface type for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover (Make: Hylem or equivalent ) for housing switches, socket outlet, regulator etc., for one 5 / 6 -pin switch socket outlet 15 amps on independent board including taking down existing unserviceable point wiring including switches, sockets, regulators, ceiling roses, terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge. Make for Item No. 95 to 97 Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Casing&Caping: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza

S&F switch piano, flush button, single pole, 5 amps, one way complete all as specified and as directed by Engineer-in-Charge.

S&F switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type complete all as specified and as directed by Engineer-in-Charge.

S&F switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type complete all as specified and as directed by Engineer-in-Charge.

S&F lamp holder, PVC/Polycarnonate insulated body with back plate for batten fittings complete all as specified and as directed by Engineer-in-Charge.

S&F ceiling rose 3 terminal PVC/Polycarnonate, isolated body complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 98 to 102: (i) Anchor (ii) Plaza, (iii) Havells (Crabtree) (iv) ABB (v) Shalabh

S&F Energy efficient LED Tube light fitting, 1x18/20 watt, with LED tube rod 18/20 Watt with bipin holders, connector block etc., complete with all accessories internally prewired and including connecting up with three core pvc sheathed flexible copper conductor cable of size 1 sqmm including taking down existing fitting complete all as specified and as directed by Engineer-in-Charge. Make: Cat part DMLN1LT8-16 of Fitting and LTT8-20 of rod of Crompton or HSN Code:8539 & MAS18W865 T8I-2100lm(PC body),20W865 T8INDI-2100 lm(rod) of Philips or Cat No. SUB118T8 LED(Body),SLETL-DSPC REFORM of Surya or LUMELINEBS 18WLED830SPCWH of Havells.

Supply and fixing integrated LED bulk head luminaries comprises of pressure die cast housing with clear acrylic diffuser & frame and IP 65 protection including 10 W LED bulb and connecting up with existing cable including taking down existing fitting and making good disturbed surfaces complete all as specified and as directed by Engineer-in-Charge. MAKE: Cat part No. LBHE-10-CDL of Crompton or Philips Cat no. WT202WLED 6S NW PSUS2PC or Cat no. SLEBLH 10W of Surya.or equivalent model of Havells

S&F Linnet LED mirror light provided with high output diffuser, PVC sqare block etc., with all accessories internally prewired and including connecting up with three core PVC sheathed flexible copper conductor cable of size 1 sqmm ncluding taking down existing fitting complete all as specified and as directed by Engineer-in-Charge Make: Cat part No: LCL-07-CDL of make Crompton or equivalent model of Havells/Philips

S&F sheet metal enclosure DB SPN 8 way 240 V with 200 Amp rated bus bar, powder coated, double door including taking down existing DB with MCBs complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SPN 40 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SP 6 to 32 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 106 to 108: HPL/INDOASIAN/ HAVELLS/C&S/ STANDARD

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI medium grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1:3:6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, 15 mm GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I including taking out existing earth plate etc., complete all as specified and as directed by Engineer-in-Charge. NOTE: Rate quoted shall be deemed to include for earth lead and protection pipe upto 7.5m.

Taking down existing un-serviceable/rusted House service bracket complete all as specified and as directed.

Taking down existing unserviceable service cable of any size complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying in trenches, fixed to wall or drawn through pipe etc., XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core and connecting with necessary lugs complete all as specified and directed by Engineer-in-Charge. Note:- Excavation, earth work, brick protection, protection pipe and sand coushioning shall be measured and paid separately. Make of cable shall be CCI / Gloster / ICC / Unistar / NICCO / Asian (RPG) / Havells / Polycab/PRG/Universal/Plaza/Crystal cables/Terracom/ Rallison/Mescab/Jeypore/KEI

Supply and spreading of dry river sand in trenches for cable protection and punned down complete all as directed by Engineer-in-Charge. Note:- Punned thickness only shall be measured for payment purpose.

M&L for laying common burnt bricks, sub class 'B', of size 230 x 115 x 75 mm in trenches for cable protection complete all as directed by Engineer-in-charge.

Material and labour for 40 mm dia bore GI tubing Light grade, laid under roads/ floor, or fixed to wall or along the pole with suitable size M.S.flat iron clamps, nuts, bolts and washers for cable protection complete all as specified and directed by Egineer-in-Charge. Make: TATA/ZENITH/JINDAL or equivalent as approved by GE.

Supply & fixing LED street light fitting 50Watt, with LED lamp, including bracket made out of 40 mm dia light grade GI pipe not less than 1.5 mtr long bent to shape duly fixed with MS clamps of MS flat 40x6 mm, nut, bolts etc., complete fixed to steel tabular poles including electrical connection complete with 2 runs of 2.5 Sqmm single core copper cable ISI marked stranded to LT terminal box to fitting complete including taking down existing fitting all as specified and as directed. MAKE:- Phillips Model No- BRP060LED58CWRMS1PSU/Crompton cat part No LSTP-60-CDL or equivalent in Wipro/Havells

Supply & fixing LED street light fitting 60Watt, with LED lamp, including bracket made out of 40 mm dia light grade GI pipe not less than 1.5 mtr long bent to shape duly fixed with MS clamps of MS flat 40x6 mm, nut, bolts etc., complete fixed to steel tabular poles including electrical connection complete with 2 runs of 2.5 Sqmm single core copper cable ISI marked stranded to LT terminal box to fitting complete including taking down existing fitting all as specified and as directed. Make: Havells cat part No. LHETAXU7PN6J060 or equivalent make of Philips/CG/Wipro as approved by GE.

Dismantling of unserviceable ACSR conductor of any type and size from existing poles at various locations complete all as specified and directed by Engineer-in-Charge.

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs. 44,550.00 B/F from Ser page No. 40 NOTE: Bidder shall insert credit amount as rate Rs. 44,550.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

C. M. AGARWAL AND CO

SANJAY SAW MILL

GEETA CONSTRUCTION

SANJAY MITTAL

PRASAD PRADHAN AND SON

BIJAY MITTAL