MS-VM section :Manufacture and Supply of welding portions for 52/60 kg rails for various track works in Sr.DEN/South/MAS Jurisdiction. 1) MS-VM Section: TRR(P)- 1.472 km; 2) MS-VM Section: TSR(P)-11.755 km; 3) MS-VM Section: TRR (S)-3.260 km; 4) MS-VM Section: TSR(S)-5.334 km; 5) MS-VM Section: TTR-115 sets; 6) MS- VM Section: TTR- 87 sets; 7) MS-VM Section: TWR-12.50 km; 8) MS-VM Section: Renewal of SEJs- 16 sets, Glued Joints - 4 sets & Improved SEJ - 52kg- 6 set; 9) MS- VM Section: TFR - 29.200 Km (Plain Track) & T/O and TBR (Plain Track) - 0.981 km; 10) MS-VM Section: Conversion of FP track to LWR; 11) MS-VM Section: Casual Renewal of 60 kg Rails , CMS Crossings & Curved Switches; 12) MS-VM Section: Improvements to PEI Ballast Depot.

Schedule of Rates 2021 (SRUSSOR - 2021) for Chennai Division.

CHENNAI DIVISION-ENGINEERING/SOUTHERN RLY

MS-VM section :Manufacture and Supply of welding portions for 52/60 kg rails for various track

works in Sr.DEN/South/MAS Jurisdiction. 1) MS-VM Section: TRR(P)-1.472 km; 2) MS-VM Section:

TSR(P)-11.755 km; 3) MS-VM Section: TRR (S)-3.260 km; 4) MS-VM Section: TSR(S)-5.334 km; 5)

MS-VM Section: TTR-115 sets; 6) MS-VM Section: TTR- 87 sets; 7) MS-VM Section: TWR-12.50 km; 8)

MS-VM Section: Renewal of SEJs- 16 sets, Glued Joints - 4 sets & Improved SEJ - 52kg- 6 set; 9) MS-

VM Section: TFR - 29.200 Km (Plain Track) & T/O and TBR (Plain Track) - 0.981 km; 10) MS-VM

Section: Conversion of FP track to LWR; 11) MS-VM Section: Casual Renewal of 60 kg Rails , CMS

Crossings & Curved Switches; 12) MS-VM Section: Improvements to PEI Ballast Depot.

S No. Item Description of Item Unit Qty Rate Amount

Manufacturing and Supply of Alumino thermic

welding portions of 52Kg/60 Kg/60EI-R260 as

approved by RDSO for welding of rails

52Kg/60Kg/60EI-R260 kg for 25mm gap by the

process of AT welding along with complete

accessories confirming to the specification laid

down in Indian Railway Standard specification

No.IRST-19-2020 up to date correction slips with

Single shot crucible fitted with Automatic Tapping

Thimble, 3 pieces pre fabricated mould (Zircon

washed) manually pressed using compressed air

petrol/LPG pre heating for execution of welding of

rail joint as directed by the engineer in charge at

site. Note: 1. The accessories along with welding

portion shall be supplied as per Annexure-I of the

IRUSSOR - 2021. 2. Rate is inclusive of

transportation of above to SSE/P.Way stores.