SPECIAL REPAIRS TO BUILDING NO T 60 AND ALLIED WORKS OF ARO EXTERNAL ELECTRIC CONTROL SYSTEM AND CONNECTED WORKS FOR SEC B AREA EXTERNAL WATER SUPPLY CONTROL SYSTEM FOR SEC A AREA AND CERTAIN REVENUE WORK AT AIZAWL UNDER GE SILCHAR

Amount

B and R Division Items

Demolition of (unreinforced) cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above GL) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and directed.

Demolition of stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

Dismantling of posts or struts(wood,steel or Reinforced Cement Concrete) in any position and section including taking out of embedded portion and making good to disturbed ground complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including or similar pattern roof coverings complete all as specified and directed.

Dismantling of wall/ceiling board as in ceiling and lining of any gauge or any thickness including cover fillets complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position, unframed work, etc complete all as specified and directed.

Taking up or down GI tubing and connection 15 mm bore , including cleaning for refixing complete all as specified and directed.

Taking up or down GI tubing and connection 20 mm bore , including cleaning for refixing complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and directed.

Surface dressing not exceeding 15 cm deep and getting out Soft/loose soil, etc complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averagng 15cm deep and getting out Soft/loose soil, etc complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and 1.5m n.exc m in deep and getting out in hard/dense soil etc including trimming bottom and sides of trenches, levelling/gradient /slopes and ramming bottom of trenches complete all as specified and directed.

Returning, filling in approved earth obtained from excavation including spreading, levelling watering and well ramming in layers not exceeding 25 cm in foundation complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding15 cm thick, watered and rammed to a true surface, etc complete all as specified and directed.

Material and labour for formwork to sides of rough finished flat concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Material and labour for formwork to sides of rough finished flat concrete formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Material and labour for Formwork to sides and soffits of rough finished flat surfaces of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Material and labour for Plain Cement Concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 100mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg) as in sub-base of floor etc complete all as specified and directed.

M & L for precast PCC bond stone of (1:3:6) type C1 using 20 mm graded stone aggregates) for retainning wall ,abutment and similar works (set in cement mortar 1:4) including neceessary formwork Complete all as specified and directed

M&L for PCC 1:3:6 type C2 (using 40mm stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in sub base , floorings, pavings , plinth protection and similar work complete all as specified and directed.

Material and labour for providing Plain Cement Concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones etc water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M&L PCC 1:2:4 type B2 (40mm grade stone agg) as in cement concrete in surface channel and drain complete all as specified and directed.

M&L for 50 mm thick PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in sub base , floorings, pavings and similar work complete all as specified & directed.

M&L for 25mm thick plain cement concrete type B-0, 1:2:4 (Using 12.50 mm graded stone agg.) as in floors even smooth without extra cement complete all as specified and directed.

Extra for forming fair finished drains or channels 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Material and labour for Reinforced cement concrete M-20 (1:1:5:3) nominal mix type A1 using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for coloumns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and labour for Reinforced cement concrete M-20 (1:1:5:3) type A1 using 20mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for reinforced cement concrete M-20 (1:1:5:3) type A1 using 20 mm graded crushed stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Walling of random rubble ,coursed in retainning walls,abutments and similar works regular coursed,well bonded,bedded and solidaly hearted,built in cement mortar(1:6) with lime/sand stone and PCC (1:3:6) type C1 precast bond stone (inlieu of stone bond stone ) set in cement mortar (1:4) Complete all as specified and directed. Note :- (i) Precast PCC Bond stone shall be measured and paid separately against Item No .05 (ii) RR Masonary will be measured after deducting PCC Bond stone

M&L for raised pointing to squared rubble, coursed or uncouresd in CM (1:3) Complete all as specified and directed

Material and labour for brick work with subclass 'B' old size bricks, straight or curved on plan exceeding 6 mtr mean radius , built in cement mortar 1:6 complete all as specified and directed.

Material and labour for half brick thick work with sub class 'B' old size bricks built in cement mortar 1:4 straight or curved on plan to any radius complete all as specified and directed.

Material and labour for 12 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair complete all as specified and directed.

Material and labour for Rendering 15mm thick in CM 1:4 on concrete surfaces finished fair and even without using extra cement complete all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair with using of WPC complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supplied only integral waterproofing compound etc complete all as spd and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified & directed.

Material and labour for laying coloured glossy machine pressed rubber moulded Chequered cement concrete tiles 300x300x25 mm thick set & jointed and pointed in neat cement slurry in floor with white or coloured cement and pigment complete all as specified and directed.

Material and labour for chequered cement concrete tiles 250cm x 250m x 22mm thick,set, jointed and pointed in neat cement slurry in floors, with mixture of grey and white cement in equal including 15mm thick screed bed or bedding layers of (1:6) cement mortar for floor finishes complete all as specified and directed.

Material and labour for precast autoclaved acrated concrete bricks (AAC) block masonary with 150mm thick with grade -I, AAC block of density 551 to 650kg/cum conformimg to IS-2185 (Part -III) i super structure above plinth level upto floor V level with RCC bend at sill level and lintel level with approved block laying polymer modified adhesive mortar complete all as specified and directed. Note : RCC bend and reinforcement shall be measured and paid separately

Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M & L for Non - skid Ceramic joint free non skid tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

S&F glazed ceramic color tiles (300x450 x 7mm thick ) on dado & skirting , set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick rendering with rough finished in cement mortar 1:4 to received tile etc, complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for Mild steel TMT bars of Fe 500D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Material and labour for Mild steel TMT bars of Fe 500D, 8 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

S &F for framed work such as grills, grating etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars(for windows); barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work cnforming to Fe 290. Gde E-165 complete all as specified and directed.

Supply and fix Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-240 complete all as specified and directed.

Supply and fix 5 mm thick mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 290 grade E-165 complete all as specified and directed.

Supply and fix stairs (framed) including stringers, treades, landing,balusters, hand rails etc. including cleats, brackets, Fe 410-W (Gde-E-250) quality-A,etc complete all as specified and directed.

Supply and fix mild steel screw bolts (machine made) of 11 mm to 15 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt exceeding 10 cm but not exceeding 15 cm complete all as specified and directed.

Supply and fix PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening but wood grain printed PVC sheet & edges will be painted to match printed sheet, etc complete all as specified.

S&F factory made solid panel pvc door shutter 30 mm thick (Style) consisting of frame made out of M.S. frame shall be covered with heat moulded wood grain printed PVC 'C' chanel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of wood grain printed sheet & 5 mm thick x 15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10 mm x 10 mm (90 degree) , all as per specification & drawing complete all as specified and directed.

S & F in repairs second class hardwood clean sawn timber framed and fixed scantlings and replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store complete all as specified and directed.

S & F in repairs 2nd class hard wood plain fillets square, rectangular or triangular in section clean sawn secured with nails or brads of sectional area exc 6 but n exc 13 Sqcm complete all as specified and directed.

S & F 4 mm thick asbestos cement plain building boards, fixed to timber framework with screws and applying two coats of white wash on new ceiling surface including dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S & F 30 mm thick Second class Hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F for 2nd class hardwood, 35mm thick, glazed and skeleton shutters, open rebated and prepared to received glass, guaze etc (with sash bars) edge of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc . complete all as specified and directed.

S&F for 2nd class hardwood, 30mm thick, glazed and skeleton shutters, open rebated and prepared to received glass, guaze etc (with sash bars) edge of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. complete all as specified and directed.

Supply and fix stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S/F mild steel,chromium plated curtain rods with brackets, including fixing stops,rollers bracket etc with harrison rails complete all as specified and directed.

Supply and fix steel ventilaor with top hung shutter including hinges steel peg stay, complete all as specified and directed.

Supply and fix 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

Supply and fix 75 mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified and directed.

Supply and fix 100 mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified and directed.

Supply and fix 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and directed.

Supply and fix 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

Supply and fix 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy all as specified and directed.

Supply and fix 150 mm long aluminum anodised barrel tower bolts of extruded section all as specified and directed

S&F 10 litre capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets complete all as specified and directed.

S&F Vitreous china squatting pan, Orissa pattern, size 580x440 mm white with integral foot rest (excluding flushing cistern and flushpipe ) including provision of cement concrete bedding complete all as specified and directed.

S & F in repairs vitreous china squatting pan, Orissa pattern, size 580x440 mm white with integral foot rest (excluding flushing cistern and flushpipe ) including provision of cement concrete bedding complete all as specified and directed.

S & F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) , bolts and flushing pipe but including seat cover, jet pressure with hinges device complete all as specified and directed.

S & F Vitreous China wash basin, Wall Hung Basin with Fixing Accessories Set, Size : 560 x 430 x 195mm, Full Pedestal for CNS-WHT-811 Set complete all as specified and directed. Make : Jaquar CNS-WHT-811/ CNS-WHT-303 or equivalent as mentioned in product make list.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified

S&F water connection for Hot & Cold w'ater connection pipe for geyser of any capacity, steel armared of length not less then 600mm complete all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fix 32 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/ sqcm fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) pipes , single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) Pipe single socketed in any length with rubber ring joints, fixed in wall complete all as specified and directed.

M & L for PVC (SWR) pipes 50 mm bore single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed

Supply and fix PVC (SWR) reducer for 110 mm bore pipe complete all as specified and directed.

Supply and fix PVC (SWR) cowls 75 mm bore pipe complete all as specified and directed.

S&F 110 mm PVC (SWR) WC connector with lip ring complete all as specified and directed.

S&F PVC (SWR) S trap 110mm bore complete all as specified and directed.

S/F PVC (SWR) junction single T equal or unequal 110mm complete all as specified and directed.

S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110mm bore complete all as specified and directed.

Supply and fix eaves gutters 110 mm bore PVC (SWR) Pipe single socketed in any length with rubber ring joints, fixed in wall complete all as specified.

S & F bands, straps,clamps,cleats & small articles, supports or stays for rainwater,ventilating pipes, including bolts etc conforming to Fe-290 Gde-E-165. complete all as specified and directed.

M&L 20 mm bore GI tube , medium grade ,with all fittings, fixed complete to wall or laid in floors etc, complete all as specified and directed.

M&L 15 mm bore GI tube , medium grade ,with all fittings, fixed complete to wall or laid in floors etc, complete all as specified and directed.

S & F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S & F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply and fix 15mm bore stop /angle valve chromium plated, any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed.

Supply and fix 15 mm bore Bib taps brass chromium plated fancy type screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs Chromium plated health faucet with or without swivel joints of any colour for fixing with 15mm pipe. (Minimum weight 40gms) with connecting pipe 15 mm size, minimum 1000mm long with hanger of PTMT any colour and necessary fixures. complete all as specified and directed. Make : Hindware Cat Part No F160027 or equivalent as mentioned in product make list.

S&F Chromium plated Towel rail 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed.

S & F Chromium plated shower roses with or without swivel joints of any colour for fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed.

Supply & Fixed vitreous China soap dish, any type fixed to plugs with chromium pleted brass screws complete all as specified and directed.

Material and labour for pre-painted designer false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600 mm x 600 mm with main runner 38 mm x 24 mm and wall angle 24 mm x 24 mm using 4 mm thick High Pressure Non Asbestos Fibre Cement prepainted decorative board (E-Board Classic) in a grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450 mm from the adjacent wall, Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610 mm c/c,so as to form 600 mm x 600 mm grid and painted with two coats of acrylic emulsion paint of approved shed /make over a coat of cement primer before installing it on the grid complete all as specified and directed. Make: Everest Industries Ltd or equivalent as per IS 14862.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Material and labour for applying two coats of cement base paint over one coat of primer on plastered surfaces of walls including preparation of new or previously untreated surfaces complete all as specified and directed.

Material and labour for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc, complete all as specified and directed.

Material and labour for preparation of new wall surfaces and applying two coats of oil bound distemper (white or tinted) over a coat of 1 mm thick wall putty over a coat of alkali resistance primer complete all as specified and directed.

Material and labour for preparation of new and previously un-treated wood and wood base surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Material and labour for preparation of new and previously un-treated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

E and M Division Items

Taking down old light fitting/ street light fitting with connected fixtures complete all as specified and directed

Taking down old MCB/ DB with fixtures complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M & L PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 sq. mm size drawn through and including PVC casing caping of suitable size and all acessaries, fire resitant, ISI Marked including modular terminal box with top cover including PVC single core unsheathed copper conductor multistranded cables FRLS 1.5 sq.as earth continuty conductor and makingn good the disturbed surfaces of walls/floors/ceiling etc all as specified and directed for the followings:-

One Light point controlled by one switch

One Ceiling fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 3 pin socket outlet 5 amps on the independent board

One 3 pin socket outlet 5 amps on the same board

M & L point wiring with PVC single core unsheathed copper conductor multistranded cables FRLS 4 sq. mm size drawn through and including PVC casing caping of suitable size and all acessaries, fire resitant, ISI Marked including modular terminal box with top cover including PVC single core unsheathed copper conductor multistranded cables FRLS 4 sq.as earth continuty conductor and makingn good the disturbed surfaces of walls/floors/ceiling etc for One 3/5 pin socket outlet 15 amps on the independent board complete all as specified and directed.

M&L for point wiring with FRLS stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

One light point controlled by one switch

One exhaust fan point controlled by one switch

One 3 pin socket outlet 5 amps on the independent board

M&L for point wiring with FRLS stranded copper conductor 2.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 2.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly for One 3/5 pin socket outlet 15 amps on the independent board complete all as specified and directed.

Supply and fix Modular switch 1 way 6A/10, 1 module complete all as specified and directed.

Supply and fix Modular switch 1 way 16A, 1 module complete all as specified and directed.

Supply and fix Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body, 65 x 50mm, 3 terminals complete all as specified and directed.

S&F electronic fan regulator, modular type, stepped type (5 steps), 120W, 230V, 2 module, ISI marked duly connected up complete all as specified and as directed

S & F in repairs 3 module modular metal flush box with white cover plate with frame ISI marked complete all as specified and as directed.

S & F in repairs 6 module modular metal flush box with white cover plate with frame ISI marked complete all as specified and as directed.

Supply and fix LED tube light fitting of 20 watt, Extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install Efficacy 110/125 lumen/watt. complete all as specified and directed.

Supply and fix Environmental friendly, long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 Protection and impact resistant of IK07 of 25 watt complete all as specified and directed.

S&F heavy duty, PVC body with PVC blades, legs, ISI marked, energy efficient, 240V exhaust fan, 250mm sweep with lauvers and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including grouting the nuts and bolts complete all as specified and as directed

S&F BLDC ceiling fan 1200mm sweep complete with blades, down rods and accessories, 230 V, min air delivery 210 CFM with service value 6.00 BEE 5 star rated & provn of ‘S’ type fan hook complete all as specified and directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated (Geyser) including electric/earth connections , mounting bolts and nuts nnections and carrying out testing for proper functioning of all as directed by Engineer-in-Charge.

S & F water connection pipe, for hot/cold water application, Steel armoured of length not less than 600 mm suitabe with brass union on both sides to suit 15 mm bore GI pipe complete all as specified and directed.

S&F sheet metal enclosure for MCB DB Triple pole and neutral 4 ways, 415 volts with 200 Amps rated bus bar, double door including dismantling old one all as specified and directed.

S&F sheet metal enclosure for MCB DB Single pole and neutral 8 ways, 240 volts with 200 Amps rated bus bar, double door complete all as specified and directed.

Supply and fixing miniature circuit breaker (MCB) of TPN current carrying capacity amp rating 40-100A , 415V, 10KA 'C' curve with connection testing and commissioning for distribution board complete all as specified and directed.

Supply and fixing miniature circuit breaker (MCB) of TP current carrying capacity amp rating 25-63A , 415V, 10KA 'C' curve with connection testing and commissioning for distribution board complete all as specified and directed.

Supply and fixing miniature circuit breaker (MCB) of SPN current carrying capacity amp rating 32A , 240V, 10KA 'C' curve with connection testing and commissioning for distribution board complete all as specified and directed.

Supply and fixing miniature circuit breaker (MCB) of SP current carrying capacity amp rating 5 to 32A, 240V, 10KA 'C' curve with connection testing and commissioning for distribution board complete all as specified and directed.

Supply and fixing miniature circuit breaker (MCB) single pole current carrying capacity 5 to 32 AMP, 240V, 10 KA 'B' curve complete with connection testing and commissioning for distribution board complete all as specified and directed.

S&F in repairs MCCB 4 pole 35kA, 200A, 415V, 50Hz, with thermal magnetic release setting, fixed to panel board with necessary arrangement including nuts, bolt, lugs, etc. complete all as specified and as directed

S&F in repairs MCCB 4 pole 35kA, 160A, 415V, 50Hz, with thermal magnetic release setting, fixed to panel board with necessary arrangement including nuts, bolt, lugs, etc. complete all as specified and as directed

S&F in repairs MCCB 4 pole 25kA, 125A, 415V, 50Hz, with thermal magnetic release setting, fixed to panel board with necessary arrangement including nuts, bolt, lugs, etc. complete all as specified and as directed

S&F in repairs MCCB 4 pole 25kA, 100A, 415V, 50Hz, with thermal magnetic release setting, fixed to panel board with necessary arrangement including nuts, bolt, lugs, etc. complete all as specified and as directed

S&F in repairs MCCB 4 pole 16kA, 63A, 415V, 50Hz, with thermal magnetic release setting, fixed to panel board with necessary arrangement including nuts, bolt, lugs, etc. complete all as specified and as directed

M & L for submain wiring with 2 runs of single core 4 sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS, ISI marked alongwith 1 runs of 2.5 sqmm multistranded insulated copper conductor cable as earth continuty conductor drawn through and including PVC conduit of suitable size on surface/ recessed as required including taking down old one complete. Note : 2 Runs of PVC wires of 4 sqmm and 1 run of 2.5 sqmm earth wire and one run conduit will be measured as one unit).

Supplying, laying, jointing fixing, testing and commissioning of electric cable, grade aluminium conductor XLPE insulated, erathed grade, armoured cables conforming to IS-7098 (Part-I)-1988, stranded, XLPE insulation, PVC tape inner sheath laid in trenches, passing through ducts, etc. fixed on poles, etc. of cross sectional size 95sqmm x 3.5 core, 1100V grade including taking out old damaged cable and disposing off complete all as specified and as directed of the following sizes: Note: Excavation/earthwork, bricks, sand cushioning and GI pipe will be measured and paid separately under respective items herein

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc. not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed.

Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed

M&L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part-I complete all as specified and as directed Note: Only punned thickness of sand shall be considered for measurement purposes

Supply and laying burnt bricks of sub-class 'B' designation 75 of size 230x115x75mm laid in trenches for cable protection complete all as specified and as directed

Material & Labour 80mm bore galvanised steel tubing, Light grade, fixed on the top of the roof with socket/clamps or by welding etc. for fixing single point air termination rod for lightening conductor support as required at site including removing of the old rusted pipe complete as specified and directed.

Supplying,laying,jointing & testing galvanised steel tubing medium grade with screwed joint together with all fitting such as bends, elbows,tees,short pieces and union etc laid in trenches/fixed to wall,ceiling,floor etc including taking out old unserviceable,cracked steel tubing including all fittings complete all as specified and directed of the following size. Note:- Earth work shall be measured and paid separately under respective item of shedule 'A'.

80mm bore

50mm bore

40 mm bore

25mm bore

20mm bore

M&L for PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in Path cutting, supporting for pipes etc complete all as specified and directed by Engr-in-Charge

Material and Labour for (cold bitumen) for filling/repair of road cutting with road patch material ready mix with minimum residual bitumin constant by weight of mix 4.5%, No heating required, No sticking on tyres etc complete all as specified and directed by Engr-in-Charge

S&F, 500 litres capacity Rotational moulded polyethylene water storage tanks (ISI marked) (Cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and as directed.

S&F, 1000 litres capacity Rotational moulded polyethylene water storage tanks (ISI marked) (Cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and as directed.

S&F, 2000 litres capacity Rotational moulded polyethylene water storage tanks (ISI marked) (Cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and as directed.

Supply and fix, Ball brass valves,high pressure 25mm with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including dismantling old one complete all as specified and directed.

Supply and fix, Ball brass valves,high pressure 20mm with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including dismantling old one complete all as specified and directed.

Supply and fixing 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed including taking out existing un serviceable gate valve complete all as specified and directed.

Supply and fixing 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed including taking out existing un serviceable gate valve complete all as specified and directed.

Supply and fixing 40mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed including taking out existing un serviceable gate valve complete all as specified and directed..

Supply and fixing 50mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed including taking out existing un serviceable gate valve complete all as specified and directed.

Supply and fixing 50mm dia ball valve brass body, ball of brass chromium plated, pressure rating PN-25, lever operated, screwed type for iron pipe and fixed including taking out existing un serviceable one complete all as specified and directed.

Supply and fixing 40mm dia ball valve brass body, ball of brass chromium plated, pressure rating PN-25, lever operated, screwed type for iron pipe and fixed including taking out existing un serviceable one complete all as specified and directed.

Supply and fixing 25mm dia ball valve brass body, ball of brass chromium plated, pressure rating PN-25, lever operated, screwed type for iron pipe and fixed including taking out existing un serviceable one complete all as specified and directed.

Supply and fixing 20mm dia ball valve brass body, ball of brass chromium plated, pressure rating PN-25, lever operated, screwed type for iron pipe and fixed including taking out existing un serviceable one complete all as specified and directed.

S&F cast iron body sluice valve heavy duty class PN 1.6 flanged ends any pattern with head wheels & brass spindle ISI marked confirming to IS-14846 of 2000 for 80 mm bore pipe with jointing material, flanged joints, rubber gaskets 6 mm thick, MS wedge nuts & bolts, washers 10 mm thick complete including dismantling old one complete all as specified and directed.

Supply and install test and commissioning of factory made outdoor type floor mounted LT cubical panel board 415 volts, 3 phase 4 wire, 50 Hz AC supply, dust and vermin proof IP-54 Protection CPRI Approved having suitable size made out on 3.15 mm CRCA steel sheet powder coated as per IEC 61439 with aluminium bus bar of 400 Amps for phases and 300 Amps for Neutral duly laminated with colour coding sleeves. Mounted on MS angle iron frame of size 40x40x4mm grouted in PCC type B2 above ground level including dismantling old existing panel board complete all as specified and directed. The Panel board shall comprise with the following controls. :-( Note- MCCB,MCB, Meters, Indicating lamps etc shall be included in the quoted rates )

(i) INCOMING : (a) MCCB 4 Pole 250 Amps, 25 KA Breaking capacity - 01 No (b) Onload change 4 Pole 250 Amps, 25 KA Breaking capacity - 01 No (c) Multifunctioning meter (Next Gen) - 01 No (d) RYB Indication lamps - 01 Set (ii) OUTGOING :- (a) MCCB 4 Pole 200 Amps, 25 KA Breaking capacity - 02 Nos (b) MCCB 4 Pole 100 Amps, 25 KA Breaking capacity - 02 Nos (c) MCCB 4 Pole 63 Amps, 16 KA Breaking capacity - 02 Nos (d) MCB TPN 63A, 10 KA Breaking capacity - 04 Nos

M & L for Earthing complete with GI Steel earth plate electrode 600 × 600 × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) earth plate paced on all side with charcoal mixed with salt to a thickness of 150mm in layers,with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth wire of size 4 mm, dia by means of bolts, nuts, check soldered and revetted to earth plate. Earth wire will be protected by using 40mm dia bore GI pipe light grade. The earthing includes PCC Pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 mtrs etc complete all as shown in electrical plate No. 3 of SSR Part-I 2009,connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

Material & Labour for Earthing with copper earth plate of size 600 x 600 x 3.15 mm thick buried directly in ground not less than 2.25 metre below ground level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150 mm in layers, connected by GI earth strip of size 25 x 4 mm thick, soldered and riveted to earth plate. GI earth strip will be protected by using 40mm bore GI pipe (light grade). The earthing includes PCC pit chamber, RCC pit cover and frame, watering pipe 20 mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 metre complete all as specified and shown in electrical plate No 3 of SSR Part I - 2009 including dismantling old earth plate complete all as specified and directed. Note: - Main earthing lead from earth plate to test point & up to 7.5 Metre to be provided. The cost for the same shall be deemed to be included in the above quoted rate.

M&L for construction of one brick massonary valve pit built in cement mortar 1:6 of size 90 cm x 90 cm x 90 cm (internal diamension) over 15 cm thick PCC 1:3:6 type C2 sub base extended alround 15 cm beyond external edge of brick work including plastering 15 mm thick in cement mortar 1:4 internally and flush pointing to brick wall surfaces externally as work proceeds complete with MS Sheet cover 10 SWG with handle, angle iron frame 40mm x 40mm x 6mm (grouting with anchor fastionors length not less than 15 cm - 04 Nos) Locking arrangement and painting complete all as specified and directed. (Rate quoted by the tenderer shall deemed to be included the cost of excavation and earth work).

MS AFTAB LASKAR (BID ID -3396541)

M P SHARMA (BID ID -3395531)

M/S TAPAN KUMAR RAY (BID ID -3396179)

M/S SUBHAM ENTERPRISE (BID ID -3397850)

M/S R A ENTERPRISE (BID ID -3395704)

SHRI YOUNUS KHAN (BID ID -3397689)

M/S PIJUSH BHATTACHARJEE (BID ID -3396202)