REPAIR MAINT OF STEEL AND WOODEN FURNITURE ITEMS OF OTM ACCN OF CERTAIN UNITA APS AND ADM REGT UNDER GE I GOS

Amount

Table office clk steel/ Officer steel (Drg No- FD-1003,1004) Removing old damaged front/rear rail, S&F new front/rear rail of 25 mm MS Square pipe 1.6 mm thick as per existing shape and size or complete all as specified & directed by Engr-in-Charge.

All as per item No 01 above but side rail

All as per item No 01 above but Legs

All as per item No 01 above but stiffener

Removing old damaged drawers, S&F new steel drawers as per drg or as directed by Engr-in-Charge.

All as per item No 01 above but shutter

M&L for welding to damaged/ decayed steel frame of table with arch welding as per std workmanship or all as directed by Engr-in-Charge.

Removing old damaged pre-laminated paricale board top of Table, S&F new 18mm pre-laminated paritcale board of table as per existing shape and size all as directed by Engr-in-Charge.

Removing old damaged lock, S&F new lock as per existing shape complete all as specified and directed by Engr-in-Charge.

Removing UNSV plastic shoes from Legs and S&F new hard PVC shoes of best quality of each leg as directed by Engr-in-Charge.

M&L for spray painting of table with synthetic enamel OG paint as per drg complete all as specified and directed by Engr-in-Charge.

Table Centre (Drg No FD-235, 274) Removing old damaged top,S & F new Top of 18 mm thick pre-laminated praticale board, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge

Removing old damaged legs , S & F new legs of 30 x 60 mm thick as per existing shape and size, as per drg or directed by Engr-in-Charge.

All as per item No 12 above but long Rail.

All as per item No 12 above but stort rail

All as per item No 12 above but stiffner.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table 900x600x760mm with drawer steel (Drg No FD-1008) : Removing old damaged top, S&F 18mm thick pre-laminated praticale board top as per existing shape and size all as per drg or as directed by Engr-in-Charge.

All as per item No 18 above but long rail

All as per item No 18 above but side rail

All as per item No 18 above but Legs

All as per item No 18 above but Center stiffener

Removing old damaged drawers, S&F new drawers as per drg or as directed by Engr-in-Charge.

Removing of old damaged drawer lock, S&F drawer lock as per sample or as directed by Engineer-in-Charge.

M&L for welding to damaged/ decayed steel frame of table with arch welding as per std workmanship or all as directed by Engr-in-Charge.

Removing UNSV plastic shoes from Leg, S&F new hard PVC shoes of best quality of each leg as per drg or as directed by Engr-in-Charge.

M&L for spray painting of table with synthetic enamel OG over a coat of red ooxide zinc chrome primer paint as per drg complete all as specified as directed by Engr-in-Charge.

Chair CB Steel with Arms (Drg No FD-75) : M&L for welding to damage/decayed steel frame of chair steel CB with Arms complete and all as directed by Engr-In-Charge.

S&F flat iron 20x3mm thick nos 02 welded to steel frame to support of wooden seat to each chair as directed by Engineer-In-Charge.

Removing the old and damage arm rest and S&F arm rest as per drg or as directed by Engineer-In-Charge.

Removing the old damage seat frame, S&F seat frame as per drg or as directed by Engr-In-Charge.

All as per item No 28 above but back rest frame.

Removing UNSV plastic cane of Seat and back rest frame M&L for recanning to seat and back rest frame with 2mm wide half round plastic cane in Godrej pattern including polishing to wooden frame, as per drg or as directed by Engr-in-Charge.

Removing the old UNSV top cap and PVC toes, S&F new PVC top cap and PVC toe to each chair as per drg or as directed by Engr-In-Charge.

M&L for painting to steel frame with one coat of OG synthetic enamel paint over a coat of red ooxide zinc chrome primer as per drg or as directed by Engineer-In-Charge.

Chair CB Steel without Arms (Drg No FD-75): M&L for welding to damage/decayed steel frame of chair steel CB without Arms complete and all as directed by Engr-In-Chrage.

S&F flat iron 20x3mm thick welded to steel frame to support of wooden seat to each chair as directed by Engr-In-Charge.

Removing the old damage seat frame, S&F new seat frame as per drg or as directed by Engr-In-Charge.

All as per item No 36 above but back rest frame.

Removing UNSV plastic cane of Seat and back rest frame M&L for recanning to seat and back rest frame with 2mm wide half round plastic cane in Godrej pattern including polishing to wooden frame, as per drg or as directed by Engr-in-Charge.

Removing the old UNSV top cap and PVC toes, S&F new PVC top cap and PVC toe to each chair as per drg or as directed by Engr-In-Charge.

M&L for painting to steel frame with one coat of OG synthetic enamel paint over a coat of red ooxide zinc chrome primer as per drg or as directed by Engineer-In-Charge.

Chair CB Steel Spl with Arms (Drg No FD-120): Removing the old damage seat frame, S&F new seat frame as per drg or as directed by Engr-In-Charge.

All as per item No 43 above but back rest frame.

Removing damaged/UNSV arm rest, S&F arm rest as per drg or as directed by Engr-in-Charge.

Removing UNSV plastic cane of Seat and back rest frame M&L of recanning to seat and back rest frame with 2mm wide half round plastic cane in Godrej pattern including polishing to wooden frame, as per drg or as directed by Engr-In-Charge.

Removing the old UNSV top cap and PVC shoes, S&F new PVC top cap and PVC shoes to each chair as per drg or as directed by Engr-In-Charge.

M&L for welding to damage/decayed steel frame all as directed by Engr-In-Charge.

M&L for painting to steel frame with OG one coat of synthetic enamel paint with as per drg or as directed by Engineer-In-Charge.

Chair Verandah (Can) (Drg No FD-19, 359) : Removing UNSV plastic cane, M&L for recanning to chair with 4mm wide half round plastic cane in Godrej pattern, as per drg or as directed by Engr-in-Charge.

M&L for welding to damage/decayed steel frame all as directed by Engr-In-Charge.

Removing UNSV plastic shoes from chair, S&F new hard PVC shoes of best quality as per drg or as directed by Engr-in-Charge.

M&L for painting steel surface with two coat of white synthetic enamel paint as per drg or as directed by Engr-in-Charge.

Charpoy GI pipe with ply top (Drg No FD-220) :Removing of damage UNSV Top plywood , S&F new 12mm thick BWR plywood as per specification or as directed by Engr-in charge

Removing damaged /UNSV long rail, S&F new 32 mm dia GI long rail med grade ISI marked threading shall be made up to 22 mm at one end and 40mm on other end complete all as specified & directed by Engr-in charge

Removing of old damaged GI UNSV long rail & fabricated in short rail to charpoy GI pipe threading shall be made upto 22 mm at one end and 40 mm on other end complete all as specified as directed by Engr-in-Charge.

Removing old damaged GI UNSV short rail and fabricated in legs to charpoy GI pipe threading shall be made upto 40 mm complete all as specified as directed by Engr-in-Charge

Removing of old damaged GI three way elbow 32mm dia S&F New GI three way Elbow 32mm dia ISI marked all as specified and directed by Engr-in-Charge.

Removing of old damaged GI 32 mm dia check nut, S&F GI 32 mm dia check nut 10mm thick complete all as specified and directed by Engr-in-Charge.

Removing of old damaged FI clamp from GI charpoy S&F new FI clamps of size 25x3mm welded to GI leg pipe complete all as specified and directed Engr-in-Charge.

Table 900x600x760mm with drawer (Drg No FD-231, 209, 223, 283) Removing old damaged top, S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing old damaged legs , S & F new legs as per existing shape and size, as per drg or directed by Engr-in-Charge.

All as per item No 61 above but long Rail.

All as per item No 61 above but short Rail.

All as per item No 61 above but side stiffner.

All as per item No 61 above but centre stiffner.

Removing old damaged Drawer , S & F new Drawer made of 12/6 mm thick BWR commercial plywood as per existing shape and size and replaced unsv knobs, as per drg or directed by Engr-in-Charge.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table Writing (Drg No FD-249, 268, 275): Removing old damaged top,S & F new Top of 18 mm thick pre-laminated praticle board, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing old damaged legs , S & F new legs of 35 x 55 mm thick as per existing shape and size, as per drg or directed by Engr-in-Charge.

All as per item No 69 above but front/rear rail.

All as per item No 69 above but side rail

All as per item No 69 above but side stiffner.

All as per item No 69 above but shelves.

All as per item No 69 above but centre stiffner.

Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge.

Removing old damaged Shutter , S & F new Shutter made of 19 mm thick MDF board, as per existing shape and size,replaced unsv knobs, all as per drg or directed by Engr-in-Charge. .

All as per item No 69 above but drawers.

Removing old damaged bottom ply of drawer , S & F new 6 mm thick bottom ply of drawer as per existing shape and size all as per drg or directed by Engr-in-Charge. .

Removing old damaged back side ply of drawer , S & F new 12 mm thick back side ply of drawer as per existing shape and size all as per drg or directed by Engr-in-Charge. .

Removing old damaged left/right side ply of drawer , S & F new 12 mm thick left/right side ply of drawer as per existing shape and size all as per drg or directed by Engr-in-Charge. .

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair Dining (Drg No FD-228, 203, 279, FD/MAP-II/05) Removing of damaged front leg ,S&F new Front leg, as per existing shape and size directed by Engr-in-Charge.

All as per item No 83 but rear leg.

All as per item No 83 but side rail (left/right).

All as per item No 83 but front rail.

All as per item No 83 but rear rail.

All as per item No 83 but back rest.

All as per item No 83 but stiffner.

Removing UNSV plastic cane, M&L for Recanning to Chair with 2mm wide half round plastic cane in Godrej pattern & PVC sheet, provided hard PVC toe to each leg as per drg or as directed by Engr-in-Charge.

Removing UNSV PVC sheet and suporting of 2x stiffener of bottom of PVC sheet M&L for Chair PVC sheet, provided hard PVC toe to each leg as per drg or as directed by Engr-in-Charge.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair Easy (Drg No FD-201, 229, 281): Removing of damaged front leg ,S&F new 25 x 55 mm thick Front leg made of 1st calss season teak, as per drg or as per existing shape and size directed by Engr-in-Charge.

All as per item No 93 above but rear leg.

All as per item No 93 above but side seat rail.

All as per item No 93above but back side rail.

All as per item No 93 above but front seat rail.

All as per item No 93above but rear seat rail.

All as per item No 93 above but back upper/lower rail.

All as per item No 93 above but stiffner.

All as per item No 93 above but arm.

Removing UNSV plastic cane,M&L for Recaning to Chair with 2mm wide half round plastic cane in Godrej pattern, provided hard PVC toe to each leg as per drg or as directed by Engr-in-Charge.

M/L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair Wooden Bottom. (Drg No FD-56,225,285): Removing of old damaged front leg ,S&F new 30 x 55 mm thick Front leg made of 1st class season teak, as per drg or as per existing shape and size directed by Engr-in-Charge.

All as per item No 104 above but rear leg.

All as per item No 104 above but side rail.

All as per item No 104 above but front rail.

All as per item No 104 above but rear rail.

All as per item No 104 above but stiffner.

All as per item No 104 above but back reast.

Removing UNSV/damaged seat of ply wood, S&F seat of 6 mm thick ply wood commercial BWR quality and provided hard PVC toe to each leg as per drg or as directed by Engineer-In-Charge.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair Writing (Drg No FD-202,250, 271,280): Removing of old damaged front leg ,S&F new 30 x 55 mm thick Front leg made of 1st class season teak, as per drg or as per existing shape and size directed by Engr-in-Charge.

All as per item No 113 above but rear leg .

All as per item No 113 above but back rest.

All as per item No 113 above but side rail .

All as per item No 113 above but front/back rail.

All as per item No 113 above but stiffner.

All as per item No 113 above but Hand rest.

Removing UNSV plastic cane,M&L for Recaning with 2mm wide half round plastic cane in Godrej pattern, provide hard PVC toe to each leg as per drg or as directed by Engr-in-Charge.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table dining 6/8 person (Drg No FD-239,269,273): Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing of old damage leg, S&F new 40 x 75 mm thick leg made of 1st class season teak, all as per drg or as per existing shape and size directed by Engr-in-Charge.

All as per item No 122 above but long rail.

All as per item No 122 above but stiffner

All as per item No 122 above but short rail

M/L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table Peg (Drg No FD-266,277) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing of old damage leg, S&F New 30 x 50 mm thick leg made of 1st class season teak, all as per drg or as directed by Engineer-In-Charge.

All as per item No 128 above but long rail.

All as per item No 128 above but short rail .

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table bed side (Drg No FD-276,248, FD/MAP ) Removing of old damage Top of Table bed side S & F new 18 mm thick pre-laminated praticale board Top, as per drg or as per existing shape and size directed by Engr-in-Charge.

Removing of old damage left/right side, S & F new 12 mm partical board with teak venreed OSD left/right side as per drg or as directed by Engineer-In-Charge.

Removing of old back side, S&F new 6 mm ply BWR quality to back side as per drg or as directed byf Engineer-In-Charge.

Removing of old damage shelves, S&F New 19 thick MDF board shelves as per drg or as directed by Engineer-In-Charge.

Removing of old damaged bottom of table, S&F New 19 thick MDF board bottom as per drg or as directed by Engineer-in-Charge.

Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Sofa Set 5 seaters with cushion (Drg No FD-281, FD/MAP/06) Removing of old damage seat and back cushion from Sofa Set 5 Seater , S & F New cushion of 100 mm thick 40 density make sleep well/Kurlon duly upholster with tepstry cloth not less than Rs. 250/- Per meter of best quality approved shade as per drg or as directed by Engineer-in-Charges.

Sofa set 3 seater with cushion (Drg No FD-281,373, FD/MAP/06) Removing of old damage tepstry cloth of seat and back cushion from Sofa Set 3 Seater S&F upholstery tepstry Cloth not less than Rs.250/- per meter of best quality and approved shade all as per drg or as directed by Engineer-in-Chargs.

Removing of old damage seat/back ply, S & F new 12 mm thick commercial BWR quality, seat ply as per drg or as directed by Engr - in- Charges.

Removing of old damage arm, S&F new 35 x 75 mm thick arm made of 1st class season teak all as per drg and directed by Engr - in- Charges.

Removing of old damage long rail, S&F new 35 x 100 mm thick long rail made of 1st class season teak, all as per drg and directed by Engr - in- Charges..

Removing of old damage short rail, S&F new 30 x 100 mm thick short rail made of 1st class season teak, all as per drg and directed by Engr - in- Charges..

Removing of old damage stiffner, S&F new 35 x35 mm thick stiffter made of 1st class season teak, all as per drg and directed by Engr - in- Charges..

Removing of old damage rear leg, S&F new 35 x 75 mm thick rear leg made of 1st class season teak as per drg or as directed by Engr - in- Charges.

Removing of old damage front leg, S&F new 35 x 75 mm thick front leg made of 1st class season teak all as per drg and directed by Engr - in- Charges..

Removing of old damage back seat long rail, S&F new 35 x 100 mm thick back seat long rail made of 1st class season teak, all as per drg and directed by Engr - in- Charges..

Removing of old damage back seat short rail, S&F new 30 x 100 mm thick back seat short rail made of 1st class season teak, all as per drg and directed by Engr - in- Charges..

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table Dressing Gents with Mirror (Drg No FD-230,379,FD/MAP/) : Removing of old damage mirror S&F new mirror of 5 to 5.5mm thick mirror as per drg or as directed by Engineer-In-Charge.

Removing of old damage drawers, S&F new drawers of 12/6 mm thick commercial BWR quality ply with knobs as per drg or as directed by Engineer-In-Charge.

Removing of old damage Top S&F New Top of 12 mm thick pre-laminated particale board,as per drg or as directed by Engineer-In-Charge.

Removing of old damage left/right side S&F new left/right side of 12 thick pre-laminated particale board, as per drg or as directed by Engineer-In-Charge.

Removing of old damage back side Ply,S&F new back side Ply as per drg or as directed by Engineer-In-Charge.

Removing of old damage bottom ply, S&F new bottom of 6 mm thick commercial BWR quality ply as per drg or as directed by Engineer-In-Charge.

Removing of old damage back side 6mm ply of mirror, S&F new back side 6mm ply for mirror as per drg or as directed by Engineer-In-Charge.

Removing of old damage long rail of mirror frame including beading , S&F new 25 x 35 mm thick long rail of mirror frame including fitting as per drg or as directed by Engineer-In-Charge.

Removing of old damage short rail of mirror frame including beading , S&F new 25 x 35 mm thick short rail of mirror frame including fitting as per drg or as directed by Engineer-In-Charge.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Bed Ply Wood Top (Drg No FD-213, 246): Removing of old damage long rail, S&F New long rail of II nd cl HW Sal wood as per drg or as directed by Engineer-In-Charge.

All as per item No 162 above but stiffner

All as per item No 162 above but short rail

Removing of old damage leg, S&F new leg of 60 x 60 at top & 30 x30 at bottom as per drg or as directed by Engineer-In-Charge.

Removing of old damage head rest, S&F head rest as per drg or as directed by Engr-in-Charge.

All as per item No 162 above but foot rest.

Removing of old damage 12mm BWR ply wood, S&F 12mm BWR ply wood ISI marked as per drg or as directed by Engineer-In-Charge.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Desk for Senior/Junior students (Drg No FD-CEJZ/SKD/388/1&2) Removing of old damage screw, S&F machine screw 3/16 in thick 65 mm long for tighting the wooden planks with suitable washer as per drg or as directed by Engr -In-Charge.

Removing of old damage screw, S&F PK screw 35 mm long for tighting the wooden planks with suitable washer as per drg or as directed by Engr -In-Charge.

Removing old damaged/UNSV top of two seater desk, S&F new top of desk 20mm thick 1st class seasoned HW teak as per existing shape and size, all as per drg or as directed by Engr-in-Charge.

Removing old damaged/UNSV bottom plank of two seater desk, S&F new bottom plank of desk 20mm thick 1st class seasoned HW teak as per existing shape and size, all as per drg or as directed by Engr-in-Charge.

Removing old damaged/UNSV front plank of two seater desk, S&F new front plank of desk 20mm thick 1st class seasoned HW teak as per existing shape and size, all as per drg or as directed by Engr-in-Charge.

Removing old damaged/UNSV left/right plank of two seater desk, S&F new left/right ply of desk 20mm thick 1st class seasoned HW teak as per existing shape and size, all as per drg or as directed by Engr-in-Charge.

M&L for welding to damaged/decayed steel frame of two seater desk with arc welding as per std workmanship or as directed by Engr-in-Charge.

All as per item No 170 above but rear rail.

All as per item No 170 above but side rail.

All as per item No 170 above but seat rail of two seater desk chair 25 thick.

All as per item No 170 above but back rest of two seater desk chair 20mm thick.

Removing of old damage hinges, S&F new hinges of size 50mm with screws as per drg or as directed by Engr-in-Charge.

M&L for applying two coat of wood polish high glossy/french polish to exposed wood surface, filling the cracks with putty and glue as per drg or as directed by Engr -in-Charge.

Locker Bed side steel (Drg No FD-257, 127): Removing old damaged base legs, S&F 1mm thick MS new base leg as per existing shape and size all as per drg or directed by Engr-in-Charge.

All as per item No 183 above but shelves

All as per item No 183 above but shutter

All as per item No 183 above but base/Top sheet

All as per item No 183 above but back sheet

All as per item No 183 above but Side sheet

Removing of old damaged CP handle and S&F new CP handle as per sample as directed by Engineer-in-Charge.

Removing of old damaged Hasp and staples, S&F new Hasp and staples of Aluminium 100 mm as per sample or as directed by Engineer-in-Charge.

All as per item No 183 above but Bow handle

Removing of old damaged center partition sheet, S&F new centre partition as per sample or as directed by Engineer-in-Charge.

M&L for spray painting with synthetic enamel paint OG as per drg or as directed by Engr-in-Charge.

M/S chandra enterprises

M/s Bapujee Builders and Traders

shekhar & company

M/s Bhavesh Construction Company

ABC CONSTRUCTION COMPANY

L BHIMSEN