Natham Town Panchayat Repairs and Maintenance of Existing ABC Care Centre at Ward No.9 Madurai Road in Natham Town Panchayat

Amount

costruction

Plain Cement Concrete 1:4:8 mix (One Part of Cement, Four Part of Fine Aggregate and Eight Part of Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including cost and conveyance of materials to work site and all labour charges for mixing, laying, Finishing and curing etc., complete as per standard specifications(TNBP No.28).

Brick Work in CM 1:5 (One part of cement & five part of Fine aggregates) mix using Second Class Bricks of Size 9 " x 4 3/8" x 2 ¾" including cost and conveyance of materials to work site and including all labour charges for mixing, laying, Finishing and curing etc., complete as per standard specifications – TNBP No:31

Supplying Fabrication and fixing of weldmesh doors and windowswith outer frame and shutter frame in MS angle of size 40mm x 40mm x 4 mm and shutters covered with Weld mesh of size 75mm x 50mm & 10 gauge including cost and conveyance of all materials,one coat of red oxide primer and labour chrges for fabrication, welding, bending, cutting and fixing etc., competed as per standard specifications.

Supplying and fixing of Steel Truss Using M.S Square Tubes for Purlins,Priciple Truss,Intermediate stiffners and as directed by the Departmental officers,Cost including Materials,Wrought and Putup,Conveyance,Erection,Finishing,Fixing in position and one coat of red oxide primer etc.complete as per Standard specification .

Roofing with best Quality of Galvalume sheets 0.47 mm thick including cost of ‘U’or ‘J’ bolts bitumen washers and cutting all sheets to required size of if found necessary during execution etc. complete including cost and conveyance of all materials and all lobour charges etc.complete as per Standard specification .TNBP No:49

Plastering with CM 1:5 mix for 12mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying,finishing and curing, etc., complete as per standard specifications – TNBP No:30,56&57.

Laying with first quality design ceramic mat finish tiles of all colours new ceramic tiles 30 x 30x 6mm tk for flooring and set in Cement Mortar 1:3 (one part of cement & Three parts of Fine aggregates)20mm thick and pointed with white cement including adding with suitable colouring pigments of match with the colour of tiles used and curing etc., complete.including cost and conveyance of all materials etc.and all labour charges etc.complete as per Standard specification .

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification (TNBP No:66-A).

Painting with two coats of Approved colour of best quality synthetic enamel paint, painting over iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification.(TNBP No:66&66-A)

Wiring with 2X1.5 sqmm (22/0.3) PVC insulated sc unsheathed Cu.conductor cable of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with switch box with 5A F.T. switch(two way) in flush with wall and convered with 3mm thick hylem sheet for MS switch box with continous earth wire connection of 14 SWGTC wire and making good of the concealed portion with suitable colour for concealed light point/Fan Point ( 6 Points/Coil SD.No.26)

Wiring with 2 x 1.5 sqm(22/0.3) insuheathed Sc Cu Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and celing with PVC accessories with TW switch box and 5A F.T switch in flush with wall 150 x 100 x 113 mm TW switch Box for 5A 3 pin non inter locking CS plug with continous earth wire connection of 14 SWG T.C wire and making good of the concealed portion with suitable colour for concealed PVC plug point (SD 38)

Supply and fixing of 4’- 18 W LED Tube Light Fitting including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers.

MOHAMED RASMI H (BID ID -1344206)