Sr of Janpad jaunpur me PWD-2 Type 4 Awash ke karya

Removing white or colour wash by scraping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. As per DSR 13.88 (Including all material, T&P , Labour Cess etc but Excluding GST).

M-150 brick work in 1:4 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work. As per SOR 305 (Including all material, T&P , Labour Cess etc but Excluding GST).

12mm thick plaster with cement mortar consisting of 1 part cement and 6 part of approved coarse sand. Minimum thickness not be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work.DSR-13.4.2 (Including all material, T&P , Labour Cess etc but Excluding GST).

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (Including all material, T&P , Labour Cess etc but Excluding GST).

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. DSR 10.30.1 (Including all material, T&P , Labour Cess etc but Excluding GST).

M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. DSR 10.25.1 (Including all material, T&P , Labour Cess etc but Excluding GST).

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. DSR 17.28.2.1 (Including all material, T&P , Labour Cess etc but Excluding GST).

Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. DSR 17.31 (Including all material, T&P , Labour Cess etc but Excluding GST).

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR18.48 (Including all material, T&P , Labour Cess etc but Excluding GST).

Providing and fixing C.P. Brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms. 15mm nominal bore. AS per SOR 18.50 (Including all material, T&P , Labour Cess etc but Excluding GST).