PROVIDING IMPROVEMENT ACCESS TO WATER THROUGH HOUSE HOLD CONNECTIONS IN EXISTING WATER SUPPLY SCHEME AHMADPUR, BLOCK BUDHLADA, DISTT. MANSA

Item Wise Description :

Carriage of Earth, Surkhi, sand, Fly Ash, bajri, ballast, stone boulders, kankar and building rubbish, Earth. Carriage of material excluding initial lead of 5 Km (a) Phillaur Sand (Av. Lead 167 Km) 0 to 167 km CSR Item No. 5.2 (i)

(b) Filter Media (Av. Lead 320 Km) 0 to 320 km CSR Item No. 5.2 (i)

Scraping cement plaster CSR Item No. 8.31 (c)

12.5mm thick cement plaster 1:4 CSR Item No. 15.9

20mm thick cement plaster 1:4 in two coat work CSR Item No. 15.20

White wash (Three coat) CSR Item No. 16.3

Applying pink primer on aluminum priming coat on wood work including prepration of surface knotting and stopping etc. CSR Item No. 16.16

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. CSR Item No. 16.17

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. (a) Earth work unto 1.5 mtr depth for (i) all classes of soil except rocky CSR Item No. 28.2 (a) (i)

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. and excavation of pipe line, minimum cover on pipe One meter(6kg/cm2 pressure). (xii) 63 mm o/d CSR Item No. 28.13 b) + 28.18 + 28.2 (xii)

90 mm o/d (xiv) CSR Item No. 28.13 b) + 28.18 + 28.2 (xiv)

110 mm o/d (xv) CSR Item No. 28.13 b) + 28.18 + 28.2 (xv)

160 mm o/d (xvi) CSR Item No. 28.13 b) + 28.18 + 28.2 (xvi)

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged pipes with screwed flanged as per IS:8329-2000, Class-K9 and laying the same in trenches to correct alignment and gradients, jointed with nut bolts and rubber insertion joints fitted complete including all cartage. a) 100 mm i/d CSR Item No. 28.23 (a)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (A) Class PN-1 as per ISI a) 80mm i/d Sluice Valves CSR Item No. 28.27 (A)

b) 100mm i/d Sluice Valves CSR Item No. 28.27 (A)

Bailing out water from the trenches for making new connections in fully charged pipe lines including cleaning trimming and dressing the trenches to correct alignment and grade as required a) Connection with pipe line Upto 300mm i/d CSR Item No. 28.49 (a)

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below A) Top layer :----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source. CSR Item No. 28.51 (a)

Construction of masonry sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. A) 0.60 x 0.60 m CSR Item No. 28.66 (a)

Hand boring horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki methed. including excavation, stringing and jointing of pipe upto 160mm complete. CSR Item No. 28.71

Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD) . (A) RCC manhole cover with frame a) 560 mm i/d RCC manhole cover with frame as per ISI (iii) Medium duty CSR Item No. 29.34 (A)

Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint and cutting of reinforced cement concrete spigot and socketed pipes and specials with rubber ring ISI marekd as per IS code IS 458-2003 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed. The pipes shall rest on the beds at all joints through their lengths and fixing of rubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc. . (B) RCC Pipe class NP-2 C) 200 mm i/d pipes CSR Item No. 29.46 (B) (c)

Non Schedule Items Supplying and fixing 150mm i/d Galvanized iron sheet floating arm 5.20 mtr long including sluice valve, survivel bend, floating drum, extended rod with hand wheel. Complete in all respect. (NS)

Non Schedule Items Taking out and washing filter media and placing the same after washing, cleaning in filter beds (a) Top Layer :-- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) (NS)

Non Schedule Items Taking out and washing filter media and placing the same after washing, cleaning in filter beds (b) Second Layer :-- Coarse sand screened, cleaned and washed and graded from 3mm to 6mm (NS)

Non Schedule Items Taking out and washing filter media and placing the same after washing, cleaning in filter beds (c) Third Layer :-- Bajri screened, cleaned and washed and graded from 6mm to 20mm (NS)

Non Schedule Items Taking out and washing filter media and placing the same after washing, cleaning in filter beds (d) Fourth Layer :--- Bajri (Coarse) screened, cleaned and washed and graded from 20mm to 25mm (NS)

Non Schedule Items Taking out and washing filter media and placing the same after washing, cleaning in filter beds (f) Bottom Layer :-- Broken stone, screened, cleaned and washed and graded from 50mm to 75mm (NS)

Non Schedule Items Providing, installing testing electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (i) Panel Board for existing Raw water motor of capacity 5 BHP (NS)

Non Schedule Items Providing, installing testing electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (ii) Panel Board for existing Clear water motor of capacity 15 BHP (NS)

Non Schedule Items Providing, installing, testing & Commissioning one no. Electronically actuated, Diaphragm operated, Metering system, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6.0 Liters of Bleaching powder solution/ Sodium Hypo Solution per Hour under maximum delivery pressure up to 7 kg./ sqcm and suction lift not less than 1.5m as per DWSS standard specifications. (NS)

Non Schedule Items Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule medium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Couplings, GI hooks etc., cutting, threading, making hole in wall and testing in trenches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.36, 28.34 B, 30.65 b. (i) Water Connection on Old pipe line (NS)

(ii) Water Connection on New pipe line (NS)

(iii) Repair of Old Water Connection (NS)

Non Schedule Items Dismantling brick or flagged stone flooring without concrete base. (NS)

Non Schedule Items Washing the false floor slabs with brushing & cleaning the cross drains etc. complete in all respects. (NS)

Non Schedule Items Painting of Sign Board (NS)

Credit of old material for floating arm (N.S. Rates) (-)

Credit of old Sluice Valve of size 100mm i/d (N.S. Rates) (-)

Credit of old panel board for existing Raw water motor of capacity 5 BHP (N.S. Rates) (-)

Credit of old panel board for existing Clear water motor of capacity 15 BHP (N.S. Rates) (-)