Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC | ₹9.9 L | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹9.9 LRejected-Finance | ₹9.9 L | L2 | Rejected-Finance L2 bidder |
Tender Value
₹9.9 L
EMD Value
₹20,000
Closing Date
30 Mar 2026, 12:00 pmClosed
EE RED Meerut
EE RED Division vikas bhawan collectorate Meerut
Chandsara mai shripal prajapati ke makan se chandi mandir ki or Interlocking tile work
2026_REDUP_1128965_3
2494/RED/2025-26/dt-10-02-26
Open Tender
Civil Works - Roads
90 days
Meerut
Please refer Tender documents.
2 documents required · 2 mandatory
₹856
₹20,000
6 Jun 2026
24 Mar 2026
30 Mar 2026
24 Mar 2026
30 Mar 2026
24 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Earthwork in filling in ordnary soil (loam clay or sand) including lift upto 1.5 m and lead upto 10 Km and including filling watering and ramming of excavated earth in to the tranches or in to the space between the building and the sides of foundation trenches or into the plinth and removel and disposal of surpluse earth as directed by the enjineer-in-charge upto distance of 30m from the foundation trenches (I.S. 253 & 231a) | |||||
| 2Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundation and under floors, including supply of all materials, labour, Tools & plants etc, required for proper completion work as per SI No. 273 | |||||
| 3M -150 Brick work in 1:4 (one cement and four course sand) mortar in Foundation and plinth including supply of all materials, labour, Tools & plants etc, required for proper completion workas per SI no. 305A | |||||
| 412 mm thick plaster with cement and coarse sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less then 1cm including supply of all materials, labour, Tools & plants etc, required for proper completion workas . As per SI No. 584 (A) | |||||
| 5Cement Concrete with 2 cm gauge approved stone grit, C/Sand & Cement in the Proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc, required for proper completion workas as per SI No. 279 (a) | |||||
| 6(A)By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. | |||||
| 7Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel roller 80-100kN static roller in stages to proper grade and camber, applying and brooming, stone screening to fill-up to interstices of coarse aggregate, watering and compacting to the required density Grading III as per Techincal Specification Clause 405. Including supply of all Material, Labour, T&P etc also including labour cess, royalty and all other applicable Taxes required for proper completion of work as per direction of Engineer-in-charge. | |||||
| 8Supply of 80mm thick precast cement concerete I-Shape Interlocking paver blocks with top layer of minimum 8mm thickness having plan dimension 200X(160+120mm) of O.P. Cement smooth high gloss finish skid resistant manufactured from rubber moulds through vibro cmpression mechanism. Grey Colour 40 Mpa, weight 4.5 Kg per number as per S.I.No. new item 14. | |||||
| 9Supply of 80mm thick precast cement concerete I-Shape Interlocking paver blocks with top layer of minimum 8mm thickness having plan dimension 200X(160+120mm) of O.P. Cement smooth high gloss finish skid resistant manufactured from rubber moulds through vibro cmpression mechanism. Grey Colour 40 Mpa, weight 4.5 Kg per number as per S.I.No. new item 14. | |||||
| 10Pro/fixing of M.S. sign board (weight 50.51kg.) made up of 40x40x6 mm3 angle iron (vertical post of length 2.75 m) 40x5 sq mm flat cross angle, 1mm thick M.S. sheet (1.2x0.90 sqm) including excavation of pit (0.45x0.45x0.45 m3), 10cm thick cement concrete 10:5:1 with brick ballast, fine sand cement,cast cement conrete 1:2:4 with cement c/sand & 20mm stone gritt (0.35x0.35x0.35 m3) both sid, two coat painting, letter writting upto 2.5 cm size(225Nos) etc complete as per standard drwaing & direction of E/I @ Rs 4800/- each | |||||
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.57 MB
Tendernotice_2.pdf
PDF • 0.97 MB
Tendernotice_3.pdf
PDF • 5.26 MB
BOQ_2105894.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid