Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹12.5 Laccepted-aoc | ₹12.5 L | accepted-aoc |
Tender Value
₹12.2 L
EMD Value
₹14,760
Closing Date
30 May 2026, 11:00 pmClosed
Directorate of Municipal Administration
Manjunath Patil
Continuation work at indira canteen nagarasabhe complex infront of kathrimaramma temple cmc ckm limits
DMA/2026-27/PM/WORK_INDENT58222
DMA/2026-27/PM/WORK_INDENT58222
Reserved
Plants and Machinery
Electronic Documents, First(One Cover)
DMA City Municipal Council Chikkamagaluru
8 documents required · 8 mandatory
₹500
₹14,760
30 May 2026
16 May 2026
29 May 2026
Continuation work at indira canteen nagarasabhe complex infront of kathrimaramma temple cmc ckm limits
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
Finishing walls with Premium Acrylic Smooth exterior paint with,Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up,resistant, Alkali & Water resistant of required shade: New work...
Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , inclu...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, d...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and ...
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic,coating not less than grade AC 10 as per IS : 1868 ) transparent or,dyed to required colour or shade, with necessary screws etc...
Providing and fixing M.S. grills of required pattern in frames of windows,etc. with M.S. flats, square or round bars etc. including priming coat with,approved steel primer all complete. Fixed to steel...
Finishing with Epoxy paint (two coats) at all locations prepared,and applied as per manufacturer's specifications including appropriate,priming coat, preparation of surface, etc. complete. On steel wo...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having12 mm air gap, including ...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Removing & Resetting existing Heavy Duty Cobble/Interlockingstones/Pavers of thickness 60/75/80/100mm using Cementand 40mm thick sand bed ( average thickness ) and compacting with plate vibrator to ac...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,...
Providing and fixing white vitreous china flat back half stall urinal,of size 580x380x350 mm with white PVC automatic flushing cistern,,with fittings, standard size C.P. brass flush pipe, spreaders wi...
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complet...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing white vitreous china pedestal type water closet,(European type) with seat and lid, 10 litre low level white vitreous china,flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ),with 100 mm sand cast Iron P or S trap, 10 litre low level white,P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
Providing and fixing 100 mm sand cast Iron grating for gully trap.
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings inc...
Providing and fixing on wall face unplasticised Rigid PVC rain water,pipes conforming to IS : 13592 Type A, including jointing with seal ring,conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Providing and fixing on wall face unplasticised Rigid PVC rain water,pipes conforming to IS : 13592 Type A, including jointing with seal ring,conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Providing & fixing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design drawings..6...
Supplying of recess mounting non integral type........LED luminaire comprising of pressure decast or extruded aluminum housing, with spring loaded false ceiling clamps, Power LED switch CCT 6500 deg...
Wall painting for beautification of govt. school builings and compound walls (as per Q. rate 2023) ( quoted rate(considering the accepted rate of tender for wall painting under Amruth Nirmal na...
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Kathrimaramma.doc
Tender Document • 0.87 MB
kathrimaramma.pdf
Others - Estimate • 3.54 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .