LIS from Chaber Khad

Amount

Wiring for light point /fan point/exhaust fan/call bell point with 1.5sq. Mm. PVC insulated heat resident flam redardant (HRFR)and low smoke single core flexible copper conductor cable in PVC Casing & Caping and earthing the light point with 1.5sq mm. HRLRFRLS / PVC insulated single core cooper condutor cable as required complete within all leads & lifts and to the entire satisfaction to the Engineer-in-Charge ( Group-B)

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x10 Sq. mm.

Supplying and fixing metal box of size 100mmx100mmx60mm deep on surface /ressed suitable size phenolic laminated sheet cover in the front including provinding and fixing 5 pin 5/6 Amps socket outlet and 5/6 amps , piano type switch, connection, painting etc as required complete within all leads & lifts and to the entire satisfaction to the Engineer-in-Charge..

Supplying and fixing metal box of size 180mmx100mmx60mm deep on surface /ressed suitable size phenolic laminated sheet cover in the front including provinding and fixing 6 pin 15/16 amps socket outlet and 15/16 amps , piano type switch, connection, painting etc as required complete within all leads & lifts and to the entire satisfaction to the Engineer-in-Charge.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Single Door -2 Way

Double door-4 way

Double door-8 way

Providing and installation of following type of ulter slim decorative LED batten with extruded aluminium heat sink with anti glare polycarbonate diffuser and energy efficient constant current, integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

LED Batten light 20 watt 1200mm

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Fixed type wall bracket 150 dia, single lamp.(Category-A)

Providing and installation of following type of LED lamp B-22 holder base with polycarbonate body and aluminium heat sink; suitablefor input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. Make: Philips,Greatwhite Syska, GE,Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

LED Lamp 9 Watt

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1200 mm sweep, Category-A

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.

Supplying and fixing Fan box for ceiling fan box as reqd complete in all respect

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Providing & installation of louvers/shutters complete with frame for exhaust fans of all sizes as required:-

Providing and installation of following type of surface mounting slim square/round type LED Downlight in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Great White, GE,Jaquar, C&S, Panasonic or any other approved by Engineer-in-Charge.

LED Wall/Down Light 12 Watt

LED Wall/Down light 22 watt

Providing and fixing Integrated LED Bulk Head Luminaire comprises of Pressure die cast housing, Acrylic diffuser & frame, IP65 Protection complete with all accessories including making connections, testing etc. as required.

LED Bulk Head Fitting 10 Watt

Providing and installation of following type of pole mounting LED luminaire with pressure die ast housing with epoxy power coated dark graphite gray colour finish. Prismatic polycaronate cover with individual LED lenses and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Great White, Havells, GE,Jaquar, C&S, Panasonic or any other approved by Engineer-in-Charge.

LED Street Light 48 Watt

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:-

40 mm dia. G.I. pipe, heavy class

Erection of Galvanized Iron (G.I.) / Steel tubular or Steel rail pole of length 3 to 8 meter but not exceeding 8 meters up to a given depth below G/L. The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including excavation and refilling etc. complete in all respects as required:-

Providing and laying of one No. Copper conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-

Armoured Cable 10 Sq.mm. 2 Core

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

2x2.5 Sq. mm.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

M/S KEDAR BHALUNI (BID ID -507474)

Mool Raj (BID ID -507483)