8218 E8 REPAIRS TO ROOF LEEKAGE WALL CLADDING PARTITION AND FALSE CEILING JOINERY PLUMBING OF CERTAIN BUILDINGS INCLUDING INTERNAL ELECTRIFICATION AT LEFT SIDE OF ND MB UNDER AGE BR I UNDER GE NW KUNJALI AT MUMBAI

Amount

Demolition of brick work or stone / boulder masonry built in cement mortar, including all quoins, arches, pillars, etc. complete all as specified and as directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Taking down cement plaster on brick / surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water etc complete all as specified and as directed.

Taking down chowkats or frame with shutter ( without taking off shutter from frame), exc 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutter from frame), n exc 1.5 sqm each complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius and built in CM (1:6) complete all as specified and as directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

M & L for Hard drawn stainless steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm and not exceeding 2mm in dia supplied and fixed complete all as specified and as directed.

M & L for Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement not exceeding 4kg per sqm complete all as specified and as directed.

M & L for Building up the profile of structural member by using latex additives (MONOBON) modified air cured motor system (Polymer modified motor/LW+) (1:5:15 = 1 monobond-5 cement -15 sand) -in damaged area in 30mm thickness including leveling profiling etc complete all as specified and as directed.

Providing and applying jacketing around columns with Micro concrete (Molith-MC) M-40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete all as specified and as directed. Note: Reinforcement shall be measured and paid separately (Rates including jacketing, formwork and micro concrete)

M & L for Making the Chajjah tops surface clean, free from dust dirt, grease, oil, followed by applying 2 coats of approved Rubberized/polymer water proofing treatment POLY ALK WP or equivalent of approved make as per the manufacturer’s specifications as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate, as roof kerbs/padding, or anywhere else required using LW+ water proofing chemical of Dr. Fixit or equvalent as per manufacturer's instruction etc complete all as specified. (WPC will be measured and paid separately).

S&F for 1st class hard wood ( Teak Wood Seasoned) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F Ist class hardwood moulding as in cornices, joints of wall panelling board etc sectional area not exc 6 Sq cm including necessary french polish complete all as specified and as directed.

S&F 40 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and as directed.

S&F 12mm thick, toughened glass for door shutters, partitions, sheves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots etc complete all as specified and as directed.

S&F SS 202 Stain finish Handle D type, 25mm dia 600mm long for glass shutter complete all as specified and as directed. Make -Jaquar Cat No. TDH102 or equivalent as approved by GE).

S&F bottom/ top patch fitting for pivot complete all as specified and as directed. Make -Jaquar Cat No. TPF -10 or equivalent as approved by GE).

S&F bottom lock patch fitting complete all as specified and as directed. Make -Jaquar Cat No. TPF -50 or equivalent as approved by GE).

M&L for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction complete all as specified and as directed.

S & F Solar control film/film in partion glass or doors, 25 micron non reflective/ transulent or any other type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S & F Ist class hard wood(TEAK WOOD) glazed and skelton shutter 30 mm thick window/door shutters divided into squares with plain chamfered or rounded mitred and rebated sash bars with edges of shas bars and frame moulded, fitted with out and mitred beeds for screwing glass/guage etc size of members of shutters as specified in SSR Part-I Section 8.20 (b) complete all as specified and as directed.

S & F 8 mm thick non asbestos fibre cement building fixed or laid/ inserted to timber/GI/ Aluminium framework with counter sunk screws finish with jointing compound and jointing tape as per manufacturer' instructions and applying two coats of oil emlusion distemper over a coat wall care putty of 3mm thick and alkali primer complete all as specified and as directed.

S & F 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and as directed.

S & F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and as directed.

Supply and fix 100mm size brass handle cast type polished bright complete all as specified and as directed.

Supply and fix 150mm size brass handle cast type polished bright complete all as specified and as directed.

M&L ball catches with 8mm dia steel ball and brass body and strking plate including letting in and fixed complete all as specified and as directed.

Supply and fix brass chromium plated barrel tower bolts, fancy type 100 mm long complete all as specified and as directed.

Supply and fix cupboard lock brass 6 liver multipurpose lock of size 100 mm complete all as specified and as directed. make Godrej. Product code 9350

S & F Brass / Steel letters or figures (Block, Roman, Italic, Indian) n exc 20 cm high made of 3 mm complete allas specified.

S&F 4mm thick backelite with decoratve choice laminated on both side complete all as specified and as directed.

S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and as directed.

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and as directed.

S & F Mortice lock, 4 liver vertical type, size 100mm complete all as specified and as directed.

S&F aluminium (Die cast) body, door closer, hydraulically regulated, desig. No. 3, unversal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub floor or at anywhrere as required, 40mm thickcomplete all as specified and as directed. (WPC will be measured and paid separately.)

Supply only Water proofing chemical Pidiproof LW+ of Dr. Fixit or Equivalent as approved by GE.

S & F 3 mm thick Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour & Aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm c/c on exceeding col/beam/ slab to hold APC cladding etc.complete all as specified and as directed. (Note:- Colour/ Pattern of ACP sheet shall be given by GE)

S & F in repair Aluminium anodised snap grid 600 x 600 mm frame work using 36.5 x 23.5 x 1.5mm main Tee, 23.5 x 23.5 x 1.5mm cross Tee and 25 x25x 1.5 mm angle fixed to wall for ceiling incl necessary supporting hanger with 4 mm GI wire for securing frame work to ceiling suspended at 120cm etc. bothway (size of grid shall be 600 x 600mm) & 4 mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density> 1200 Kg/ Cum) of size 595mmX595mmcomplete all as specified and as directed. (Make : Everest or equvalent as approved by GE)

S & F in repair GI for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with & incl Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs & Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surfacecomplete all as specified and as directed.

Extra over above items for any sunk or raised moulding complete all as specified and as directed.

Providing and fixing 10mm thick plaster of paris to wall with required line & level to receive wall finishing.

M & L for Cleaning of surface of floor by brooming, washing and drying with cloth including removal of oil mats and provision of high density laminated wooden flooring (pergo) 8mm thick fixed in floors / skirting including moulding etc, including dismantling old unserviceable wooden flooring complete all as per manufacturer's instructioncomplete all as specified and as directed. make:" Pergo / ROSETTA"

M & L Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, Digital full nano polish / VC vitrified) in floors/ wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including 20mm thick screed bed in CM 1:4 and dismantling existing tiling including cement mortar bedding (but not backing) complete all as specified and as directed.

M & L Vitrified ceramic tiles (double charged) 10mm thick (square/rectangular) area of each tile exceeding 0.35 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including 20mm thick screed bed in CM 1:4 and dismantling existing tiling including cement mortar bedding (but not backing) complete all as specified and as directed.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with a over and including 15 mm thick screed bed in CM 1:4 and dismantling existing tiling including cement mortar bedding (but not backing) complete all as specified and as directed.

M & L for Coloured glazed ceramic tiles in vertical surface any size mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with over and including 10mm thick screed bed in CM 1:3 and dismantling existing tiling including cement mortar bedding (but not backing) complete all as specified and as directed.

S & F in repair 20 mm thick Granite stone slab ( of any type) work ( table rubbed and polished) in steps, risers, jambs, pillars, window cills, cooking plateforms and like in cemnet mortar ( 1:4) including pointing in white cemnet (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

All as per Srl item No. 51 here in before but as in floor comlete all specified.

S & F in repair for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified.

All as per Srl item No. 53 here in before but as in skirting/ riser/ dado etc with and including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed.

M & L for Kota stone slab polishing , as in floors, steps, landing etc. Repair and fix broken pieces , set and jointed in neat cement slurry and pointed in coloured cement if required to match the shade of slab, including cutting, polishing etc. complete all as specified and as directed.

M & L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and as directed.

M & L for complete removal of existing treatment in ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3mm thick and alkali primer complete all as specified and as directed.

S&F Gate valves gun metal of size 20mm with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors including taking down old GI tubing and connections complete all as specified and as directed.

All as per Srl item No. 60 here in before but 20 mm bore pipe.

All as per Srl item No. 60 here in before but 40 mm bore pipe.

M & L for Vitreous china water closet, couple closet, of size 380x725x690 mm, complete with and including all accessories, fixed in repairs (Make -Jaquar Cat No ONS-WHT-10853S or equivalent as approved by GE).

M & L for Vitreous china table top wash basin, of size 565x420x140 mm complete with and including all accessories, fixed in repairs (make -Jaquar Cat No KUS-WHT-35935 or equivalent as approved by GE).

S&F vitreous china urinals, half stall type, flat back, white, with grating and union for discharge pipe, complete fixed in repairs (Make -Jaquar Cat No URS-WHT-13253O or equivalent as approved by GE).

S&F in repair Urinal with sensor with Fixing Accessories Set, Size: 370x315x620mm complete all as specified and as directed. (Make -Jaquar Cat No URS-WHT-13255 & SNR-CHR-51097or equivalent as approved by GE).

S&F in repair towel rail 600mm long complete all as specified and as directed. (Make - Jaquar Cat No AQN-7711A or equivalent as approved)

S&F in repair Toilet roll holder with flap complete all as specified and as directed. (Make -Jaquar Cat No AKP-35753PS or equivalent as approvedd)

S&F in repair towel ring round complete all as specified and as directed. (Make: Jaquar Cat No AQN-7721 or equivalent as approved)

S&F in repair soap dish complete all as specified and as directed. (Make -Jaquar Cat No AQN- 7731 or equivalent as approved)

S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer complete all as specified and as directed. (Make -Jaquar Cat No. ALD- 579 or equivalent as approved)

S&F in repair two way bib cock with wall flange complete all as specified and as directed. (Make - Jaquar Cat No ORP-10041PM or equivalent as approved)

S&F in repair angular stop cock complete all as specified and as directed. (Make - Jaquar Cat No ORP-10053PM or equivalent as approved)

S&F in repair Braided hoses 450mm long complete all as specified and as directed. (make - Jaquar Cat No ALD-803AB or equivalent as approved)

S&F in repair pillar cock Chrome Plated complete all as specified and as directed. (Make - Jaquar Cat No ORP-10001PM or equivalent as approved)

S&F in repair bib cock CP complete all as specified and as directed. (Make - Jaquar Cat No ORP-10037PM or equivalent as approved)

S&F glass shelf complete all as specified and as directed. (Make- Jaquar Cat No. CACN-1171N or equivalent as approved by GE).

Taking down old wooden cup boards fixed to walls of any size complete all as specified and as directed.

M&L 19mm thick plywood, grade BWR, type BB,fixed with screws complete all as specified and as directed.

M&L 12mm thick plywood grade BWP, type BB fixede with screw to timber frame work complete all as specified and as directed.

Supply and fix 4mm thick veneered decorative plywood, grade-I (with BWR resin) decorative veneers on one face only as per instructions complete all as specified and as directed.

S & F Hettich telescopic channel 20" for drawers complete all as specified and as directed.

S & F SS concealed hinges fixed with ss screws to wooden shutter complete all as specified and as directed. Make- Al Bihari or equivalent as approved by GE).

Supply and fix 100mm size brass handle cast type polished bright complete all as specified and as directed.

M&L for Ist class hard wood beads rectangular in section of sectional area not exceeding 3 Sq Cm, chamfered and fixed with nails complete all as specified and as directed.

M&L for making unit emblem & writing unit name with reflective type films on the toughened glass as per sketch attached complete all as directed.

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed.

S&F powder coated aluminium frame/shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket,glazing, screws, handles, hinges, tower bolts etc. complete all as specified. Make: JINDAL /HINDALCO/ INDALCO. Note :-(i) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

S&F 5.5 mm thick sheet glass, plain or frosted, prermium quality, in any size of pane complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. M.S.frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.

S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F Stainless Steel but hinges 100mm size complete all as specified and as directed.

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and as directed.

S&F Extrude aluminium anodised alloy handles, fabricated type 150mm size complete all as specified and as directed.

M&L for water proofing plaster at any position including wall, ceiling, roof, chajjas, parapet in CM 1:3, 15 mm thick in two coats using Pidiproof LW+ water proofing chemical of Dr. Fixit or equvalent as per manufacturer's instruction and finishing the surface even and smooth without using extra cement complete all as specified and as directed. (Water Proofing Chemical shall be measured and paid separately)

M&L for water proofing treatment of sunken floor/wall surfaces by applying two coats of water proofing chemical and cement mix in ratio 1:1.5, (PIDICRETE UPR or equivalent approved water proofing chemicals), complete all as per manufacture's instructions and as directed. Make : Dr. FIXIT, Chemisol, Choksy Chemicals.

M&L for PCC 1:7:12 type F2 using 40 mm graded stone aggregate as in filling etc. complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finishing the surface even and smooth all as specified and directed.

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3mm thick and alkali primer complete all as specified and as directed.

All as per Srl item No. 101 here in before but in ceiling

M & L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and as directed.

M&L for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement and Hard drawn steel wire fabric for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thk in two coats, using polymer as per manufacturer's instructions complete all as specified and directed. Make : Dr. Fixit/Sunanda/chemestik/Fosrok

Supply only micro concrete complete all as specified and as directed. Make : Dr. Fixit/Sunanda/ chemestik/Fosrok

M&L for Preparation of old decorated surfaces of walls by washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper/oil emulsion on walls complete all as specified.

M&L for Preparation of old decorated surfaces of ceilings by washing, rubbing down and stopping and applying one coat of oil bound distemper/oil emulsion on ceilings complete all as specified.

M & L parking tiles any shape and size and color in floors etc. with and including 20mm thk CM (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles as specified and directed by Engineer in charge

Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S & F Steel work in tubular trusses including special shaped washer,as in post, runners, rafters, purlins etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

S&F Waterproof PVC fabric with Acrylic & PVDF (polyvinyl-idene-fluoride) coating with all necessary fixtures, of any size and shape or canopies etc. which is to be attached with Stainless steel or mild steel structural where ever required during execution for making sheds, weight of the fabric is considered, with fabrics ranging from 1000gsm to 1500 gsm. Note :The Tensile Strength and Tear Strength of PVC fabric with grade specification should be produced before Engnineer-in-charge before the installation. Cost of Mild steel/staniless steel used will will be paid separetly

M & L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and as directed.

S & F 450 mm dia aluminium concentrina coil fencing fixed to MS angle with Aluminium clipscomplete all as specified and as directed.

M & L for 1.5 mm thick galvanised steel plain sheet as in Valley gutters fixed with rivets or other suitable arrangements over MS brackets Trapezoidal shape of required profile with desired slope etc complete all as specified and as directed.

M & L for preparation of old steel surfaces exc 10 cm width or girth and applying one coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M & L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M & L for preparation of newly plastered or un plastered wall surfaces, over 10cm girth, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.

M & L for preparation of old wooden or wall surfaces by scrapping and filling the voids with necessary chemcials and applying one coats of synthetic enamel paint complete all as specified and directed .

Removal of debries, old concrete, spoils etc exc.5 Km complete all as specified and as directed outside MD land complete all as specified and as directed.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan / sockets/ power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, removing material to store for keeping in safe custody and making good to disturbed surfaces as directed.

Desconnectiong & taking down, strip opening, cleaning all parts and packing of ceiling fan / Exhust fan of any make and size & greasing ball bearing with specified quality grease complete all as specified and as directed.

M&L for hanging ceiling fan / Exhust fan in position & re-comissioning the same including making electric connection complete all as specified and as directed.

S&F in repair of SPN DB 12 Way, 240V with 200A copper busbar each phase, double door type, IP43- IK 09 protection suitable for housing MCB's all as specified and directed. Make: Legrand cat No 5076 12 or equivalent cat No. in Seimens/GE.

S&F in repair of vertical type TPN DB 8 Way, 240V with 200A busbar, double door type, IP43- IK 09 protection suitable for housing MCB's all as specified and directed. Make: Legrand cat No 5077 27 or equivalent cat No. in Seimens/GE. NOTE FOR ITEM No. 123 to 124 : MCB DBs shall be concealed in wall wherever posible including making good the surface to match with surrounding.

S & F MCCB FP 125 Amps,16KA, complete all as specified and directed. Make : Legrand cat No 4200 06 or equivalent cat No. in Seimens/GE

S & F MCB SP 6-32 Amps,10KA, 'C' Curve 240V complete all as specified and directed. Make : Legrand/Seimens/GE

S & F MCB SP 40 Amps,10KA 'C' Curve 240V complete all as specified and directed. Make : Legrand/Seimens/GE

S & F MCB SPN 63 Amps,10KA 'C' Curve 240V complete all as specified and directed. Make : Legrand/Seimens/GE

S & F MCB SPN 40 Amps,10KA 'C' Curve 240V complete all as specified and directed. Make : Legrand/Seimens/GE

S & F MCB TP 63 Amps, 10KA, 'C' Curve , 415V complete all as specified and directed. Make : Legrand/Seimens/GE

S & F MCB TP 40 Amps, 10KA , 'C' Curve , 415V complete all as specified and directed. Make : Legrand/Seimens/GE

S & F in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A all as specified and directed. Make: Legrand cat No 5078 11 or equivalent cat No. in Seimens/GE.

M&L for sub-main wiring with 2 runs of 2.5 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing and caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 2.5 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note : (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza

M&L for sub-main wiring with 2 runs of 4.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note : (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, (Make: Havells/ Finolex/ Plaza) drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of PVC moulded box with cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for :- NOTE: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza (c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light / fan / bell point controlled by one 5A switch

One 5A flush type switch socket point on same board board

One 5A flush type switch socket point on independent board

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC modular box with cover plate complete comprising of 03 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza (c) Switch socket measured & paid separately.

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC moulded box/hylem sheet for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza (c) Switch socket measured & paid separately.

S & F in repirs LED light fitting 1x18W, 230 V, 4 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc. complete with all accessories internally pre-wired and including fixing the fitting on suspension of 1.5mtr (set of 02 Nos) and connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make : Bajaj cat part No.112181 or equivalent cat part in CG/Wipro/C&S

Supply and fixing in repair new generation suspension mounted 2x18W LED pendant Luminaires and high translucent diffuser provides high quality ecomonic energy saving lighting including suspension of 1.5mtr (set of 02 Nos) complete fixing arrangement all as specified and directed. Make :CG/Bajaj/C&S

Supply and fixing in repair Ultra slim edge lit type recess mounting LED 2X2 Luminaire 36 watt and extruded aluminium housing with anti-glare diffuser provides high quality ecomonic energy saving lighting LED Luminaire suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and as directed. Make: Crompton cat No LCPL-36-CDL(2X2) / C&S cat No LTCRSLM36WATT2X2 or equivalent Cat part in Surya / Philips

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed.

S & F modular switch 1 way 6A, 1 module all as specified and directed. Make: Anchor/Roma/Legrand.

S & F modular switch 1 way 16A, 1 module all as specified and directed. Make: Anchor/Roma/Legrand.

S & F modular switch 2 way 6A all as specified and directed. Make: Anchor/Roma/Legrand.

S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed. Make: Anchor/Roma/Legrand.

S & F modular socket 6/16A,2/3 pin, combined 2 module all as specified and directed. Make: Anchor/Roma/Legrand.

S&F for modular fan step regulator, 120W - 2 modular all assspecified and directed. Make: Anchor/Roma plus/Legrand

Material & labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire all as specified and directed.

ialandhara construction