PROVN OF 250M ROAD AND HARD STANDING OF KSP AT BAWA GATE, HOSHIAR ENCLAVE (CTC LINES) AT MORAR CANTT, GWALIOR

M&L earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan (including getting out and disposal of excavated earth upto 500 m from site and and lift upto 1.5 m complete all as specified and directed by GE.

M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for 200mm thick Soling (or sub base) with broken stone boulders or quarried stone interstics filled, surface formed and rolled & consolidated with 8 to 10 tone power roller to required gradient & camber complete all as specified & directed.

M &L for Laying and compacting 150 mm thick in two layers of 75mm each(compacted thickness) Wet Mix Macadam (WMM) grading table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paverand rolling with vibratory roller of capacity 80-1OOKN static weight and consolidating to required gradient and camber complete all as specified and directed.The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and bridge works 2013.

M&L for preparing unsurface (WMM ) by brushing with wire brushes for removing caked mud et, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly over serface of WMM a priming/tack coat with paving bituminous primer at 10 kg per 10 sq metre complete all as specified and as directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 50-75 mm) with paving bitumen VG-40 of 4% by weight of total mex complete all as directed by Engr in charge.

M&L for bitumenous semi dense Asphastic concrete 40mm consolidated thickness using 5.5% of binder content by weight of total mix using paving bitumen VG-40 laid/Spread uniformly by means of mechanical paver over black top surfaces and rolled with 8 to 10 ton power roller and compacted to required gradient and camber complete all as specified and as directed

M&L for Rough dressed sand stone, 40mm thick laid dry but bedded, jointed and pointed in CM 1:3 in vertical surface as in edge stone in road berm complete all as specified and directed

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed

S&F Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.