Replacement of corroded line and rerouting the distribution lines at SOE in HAL Bangalore

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Year of Estblishment of Company/Business

If Other, please specify

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

PAN no and Name of Holder

PF number (If any)

ESI number

Goods and Service Tax ID No.

Contact details

Registered Contractor

Pls Enter

I.T Returns for past 03 assessment years

Turnover during the following 5 years (In Rs. Lakhs)

Pls enter Finiancial Turnover in Rupees Lakhs for all the years

DETAIL OF WORK ON HAND UPTO N-Months (N-contract period) [For Bid capacity calculation] NOTE : CA certified statement as per below format to be uploaded.

Name of Organization with address

Work Schedule for completion of works with in stipulated time [Please enclose action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)]

Bank(s) details: [Copy of ECS and cancelled cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Bank Statement for past three month

Latest Overdraft Facilties with Bank enter Name of Bank, Date of Issue and Value of Over Draft

Solvency Certificate Details

Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender. [Work experience certificates / Completion certificates should be uploaded for verification]. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost. [Amount put to the Tender]

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Type of Work and Organisation name [ Incase of private works the same shall be supported with TDS certificate]

Related Document to be Uploaded to eProcurement Portal

DEAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficant separate sheet to be uploaded with the same format as below)

Name of members or technical personllel avalable in the organization

DETAILS OF MACHINERY AVAILABLE

Name of Mechinery

Concrete Mixers - Type etc

Vibrators - Diesel - Electrical

Weiding equipment's

a) Rectifiers

b) Welding Generators

Erection equipment's

Cranes-

Hoists-

Lifts-

Water Lifting motor pumps

a) Diesel

b) electric

Drilling Equipment's

Compressors

Trucks

Stone crushers

Bitumen hot mixture plant

Bitume boiler

Rollers

Batching plants

Vibratory rollers

Generators

Cranes-Details

Concrete pumps

Road Pavers

Rock breakers

Transit mixers

Excavators

Weight batches

Others

DECLARATION

Pls enter

EMD details

Enclosed / Not enclosed

Enclosed

Average annual financial turn over during the last 3 years, ending 31st March 2025 and details for last 5 years to be provided to assess the bid capacity. The values provided to be supported by uploading Balance Sheet along with Profit & loss account (In Rs. Lakhs)

Specification

Excavating trenches of required width for pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m etc., all complete as directed by Engineer-in-Charge.

Earth work in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, All kinds of soil etc., all complete as directed by Engineer-in-Charge.

Removing / transporting the surplus excavated earth including debris, vegetation waste etc., to a distance upto 5000 m outside HAL premises to contractor's own yard including loading, unloading, depositing, spreading, levelling etc., all complete as directed by Engineer-in-Charge.

Demolishing cement concrete of nominal concrete 1:4:8 or leaner mix (including equivalent design mix), manually / by mechanical means including disposal of material within 50 metres lead etc., all complete as directed by Engineer-in-Charge.

Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering for all work up to plinth level etc., all complete as directed by Engineer-in-Charge.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand derived from recycled concrete aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including recycled concrete aggregate (RCA) upto 25%) excluding the cost of centering and shuttering for all work up to plinth level etc., all complete as directed by Engineer-in-Charge.

Providing and laying D.I. specials up to 600 mm dia of class K-12 suitable for mechanical jointing as per IS: 9523 etc., all complete as directed by Engineer-in-Charge.

Construction of brick work in CM (1:6) using table moulded bricks for 230mm brick wall superstructure above plinth level up to floor V level in all shapes and sizes and and along with necessary formwork, curing, finishing, making or leaving holes & chases and making good etc., all complete as directed by Engineer-in-Charge.

Plastering with CM (1:4) of 12 mm thick over brick masonry surface, finished smooth with trowell without using extra cement including curing preparation of surface etc., all complete as directed by Engineer-in-Charge.

Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above/below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., all complete as directed by Engineer-in-Charge. Note : a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed reinforcement bars shall be coated with cement slurry.

Providing and fixing 150 mm dia D.I./C.I. sluice valves (with cap) of approved make with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) etc., all complete as directed by Engineer-in-Charge.

Providing and laying S&S centrifugally cast (spun) ductile iron class K-9 pipes conforming to IS 8329 etc., all complete as directed by Engineer-in-Charge.

150 mm dia

100 mm dia

Providing and fixing of 100 mm dia C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. (tail pieces, tapers etc if required will be paid separately) etc., all complete as directed by Engineer-in-Charge.

Providing and fixing enclosed type water meter (bulk type) conforming to IS 2373 and tested by municipal board including suitable C.I. dirt box strainer for bulk type water meter conforming to IS 2373, with bolts, nuts, rubber insertions etc. (tail pieces if required will be paid separately) etc., all complete as directed by Engineer-in-Charge.

150 mm dia

100 mm dia

80 mm dia

Providing and fixing 3 layer PP-R (poly propylene random copolymer) pipes for external work, conforming to IS 15801, UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints etc., all complete as directed by Engineer-in-Charge.

PN - 16 Pipe, 32 mm OD (SDR-7.4)

PN - 10 Pipe, 63 mm OD (SDR-11)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) etc., all complete as directed by Engineer-in-Charge.

32 mm nominal bore

65 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank etc., all complete as directed by Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, bases for columns etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 100 mm diameter class II C.I. sluice valves (with cap) with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 20 mm nominal bore ball valve (brass) of approved quality, high or low pressure, with plastic floats etc., all complete as directed by Engineer-in-Charge.

Coursed rubble masonry work (first sort) with hard stone (first or second sort) in superstructure above plinth level and upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) etc., all complete as directed by Engineer-in-Charge.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc., all complete as directed by Engineer-in-Charge.

Providing and fixing G.I. pipes for external work with G.I. fittings including trenching and refilling etc., all complete as directed by Engineer-in-Charge.

50 mm dia nominal bore

80 mm dia nominal bore

Rupees One Crore Eleven Lakh Fifty Nine Thousand Five Hundred Sixty Two and Fifty Four Paise Only

Approximate Amount Put to Tender

Rupees Twenty Lakh Eight Thousand Seven Hundred Twenty One and Twenty Five Paise Only

Rupees One Crore Thirty One Lakh Sixty Eight Thousand Two Hundred Eighty Three and Seventy Nine Paise Only