REPAIR AND POLISHING TO WOODEN FURNITURE AT INS SHIVAJI LONAVLA

Removing following old and unserviceable parts / components of “BED PLYWOOD TOP” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No: FD- 246, 247) Head rest complete of size and specification as per drawing.

All as per item No 1 here-in-before Foot rest complete of size and specification as per drawing.

All as per item No 1 here-in-before Plywood top with 12 mm thick BWR commercial. (Make of ply :Century Ply/Archid ply/Green Ply/Kit Ply)

All as per item No 1 here-in-before Long rail of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 1 here-in-before Short rail of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 1 here-in-before Both side veneered of Head Rest of size and specification as per drawing.

All as per item No 1 here-in-before Both side veneered of Foot Rest of size and specification as per drawing.

All as per item No 1 here-in-before M&L for preparation of old polished surface of bed plywood top by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

Removing fwg old and unserviceable parts / components of “CHAIR DINING WITH CUSHIONED ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD/E6/MAP/10,FD/MAP-II/04, TP) Front leg made out of teakwood of size and specification as per drawing.

All as per item No 9 here-in-before Rear leg made out of teakwood of size and specification as per drawing.

All as per item No 9 here-in-before Bottom stiffener long first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 9 here-in-before Bottom stiffener short first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 9 here-in-before Short rail and made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 9 here-in-before long rail made of one piece of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 9 here-in-before Complete seat made out of 75 mm thick 32 density foam with 12 mm thick plywood base, upholstered with tapestry as directed by Engineer-in-charge. (Make of cushion :Sleepwell/ kurlon/Godrej interio)

All as per item No 9 here-in-before M&L for preparation of old polished surface of chair dining with cushioned by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

Removing following old and unserviceable parts / components of “CHAIR EASY” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-201,229) Front / Rear legs made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 17 here-in-before Arm rest made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 17 here-in-before Seat Front / Rear / side rail made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 17 here-in-before Back Upper / bottom rail made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 17 here-in-before M&L for preparation of old polished surface of chair easy by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

Removing following old and unserviceable parts / components of “CHAIR DINING ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-228,279, FD/MAP-II/05) Front legs made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 22 here-in-before Rear legs made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 22 here-in-before long / short rail of seat made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 22 here-in-before Stiffener of back made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 22 here-in-before Short & long stiffener of bottom made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 22 here-in-before Seat made out of 4mm thick moulded PVC like godrej pattern.Bottom side shall be moulded like PVC ribs two nos in perpendicular directions of size 4 x 10mm size. (Make: Amko or equivalent)

All as per item No 22 here-in-before M&L for preparation of old polished surface of chair dining by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear varnish to match with existing polish as directed by the Engineer-in-charge.

Removing following old and unserviceable parts / components of “PEG TABLE” and S&F new parts / components of same size, existing pattern with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.(Drg No : FD-236, 277,384) Removing old u/s tops from peg table and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Action tesa)

All as per item No 29 here-in-before Legs of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 29 here-in-before Short rail of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 29 here-in-before Long rail of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 29 here-in-before M&L for preparation of old polished surface of peg table by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

Removing following old and unserviceable parts/components of “SIDE BOARD” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-241, 371 ,1112) Back made out of 6 mm thick plywood.

Removing old u/s top & Side of the side board and S&F new top and side made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Action tesa)

All as per item No 35 here-in-before Door made all as per items 6.02 of size and specification as per drawing.

All as per item No 35 here-in-before Drawer made all as per items ser No 6.02 of size and specification as per drawing.

All as per item No 35 here-in-before Knob 40mm dia as per drawing.

Removing following old and unserviceable parts / components of “TABLE CENTER” and S & F new parts / components of same size, existing pattern , same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-235, 274) :- Removing old u/s tops from Table centre and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Action tesa)

All as per item No 39 here-in-before Legs of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 39 here-in-before Short rail of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 39 here-in-before Long rail of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 39 here-in-before M&L for preparation of old polished surface of table centre by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

Removing following old and unserviceable parts / components of “TABLE DINING 06/ 08 PERSON ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge.(Drg No: FD-239, 273.FD/MAP:-II/03) Removing old u/s tops from Table dining 06 persons and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Action tesa)

All as per item No 44 here-in-before Top for Table dining 08 persons

All as per item No 44 here-in-before Legs made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 44 here-in-before Short rail made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 44 here-in-before Long rail for Table dining 06 persons made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 44 here-in-before Long rail forTable dining 08 persons made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 44 here-in-before M&L for preparation of old polished surface of table dining 06 person by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

All as per item No 44 here-in-before Polishing for Table dining 08 persons

Removing following old and unserviceable parts / components of “TABLE DRESSING GENTS WITH MIRROR” and S&F new parts / components of same size, existing pattern same texture to match with existing, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD 230,379) 5 mm thick Looking Mirror with 06 mm thick plywood at the back with complete frame of first class hard wood for mirror and specification as per drawing. (Make of mirror : Modigaurd/Swastik/Saint gobin) (Make of Ply: Century/Archid/Green ply)

All as per item No 52 here-in-before Lower wooden box made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) and one side French polishing, 6 mm thick back plywood & knob 40mm dia complete all as specified in drg as directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Action tesa)

All as per item No 52 here-in-before M&L for preparation of old polished surface of table dressing gents with mirror by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

Removing following old and unserviceable parts / components of “TEAPOY WOODEN” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-232, 278,382) Removing old u/s tops from Teapoy wooden and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Action tesa)

All as per item No 55 here-in-before Legs of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 55 here-in-before Short rail of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 55 here-in-before Long rail of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 55 here-in-before M&L for preparation of old polished surface of teapoy wooden by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

Removing following old and unserviceable parts / components of “TABLE 3' x 2' WITH & WITHOUT DRAWER” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-223, 224, 283, 284) Removing of old u/s top of table 3 x 2 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Action tesa)

All as per item No 60 here-in-before Leg made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 60 here-in-before Long rail made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 60 here-in-before Short rail made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 60 here-in-before Long bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 60 here-in-before Short bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 60 here-in-before Complete drawer made out of 12 mm thick plywood of size and specification as per drawing.

All as per item No 60 here-in-before M&L for preparation of old polished surface of table 3' x 2' with & without drawer by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

Removing following old and unserviceable parts / components of “TABLE 3' x 3' WOODEN” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-88 M, 291) Removing of old u/s top of table 3' x 3' and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Action tesa)

All as per item No 68 here-in-before Leg made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 68 here-in-before Long rail made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 68 here-in-before Short rail made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 68 here-in-before Long bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 68 here-in-before Short bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 68 here-in-before M&L for preparation of old polished surface of table 3 x 3 wooden by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear varnish to match with existing polish as directed by the Engineer-in-charge.

Removing following old and unserviceable parts / components of “TABLE WRITING (STUDY) ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and olishing complete all as shown on drawing & as directed by Engineer-in-charge. ( Drg No : FD-249,275) Top made out of 18 mm thick pre-laminated particle board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Action tesa)

All as per item No 75 here-in-before Legs made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 75 here-in-before Complete drawer made out of 12 mm thick plywood of size and specification as per drawing.

All as per item No 75 here-in-before Shutters made out of 18 mm thick pre-laminated particle board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Action tesa)

All as per item No 75 here-in-before M&L for preparation of old polished surface of table writing by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

All as per item No 75 here-in-before M&L for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-In-Charge.

Removing following old and unserviceable parts / components of “TABLE DRESSING LADIES” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD - 251,378,FD/MAP-II/07) Looking Mirror of approved quality with back of 06 mm plywood and frame of size and specification as per drawing. (Make of mirror : Modigaurd/Swastik/Saint gobin) (Make of Ply: Century/Archid/Green ply)

All as per item No 81 here-in-before Lower wooden box with drawer made out of 18 mm thick pre-laminated particle board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around, 6 mm thick back plywood, 4 mm thick sliding glass, Aluminium channel, knobs etc complete all as per drawing. (Make of Prelaminated particle board :Greenlam/ Centrury ply/ Action tesa)

All as per item No 81 here-in-before Taking out old unserviceable sliding glass with aluminium channel and S&F new sliding glass 4mm thick and edges should be grinding and rounded complete all as per drg. (Make of mirror : Modigaurd/Swastik/Saint gobin)

All as per item No 81 here-in-before M&L for preparation of old polished surface of table dressing ladies by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

Removing following old and unserviceable parts / components of “CHAIR WRITING ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No : FD-250, 280) Front legs made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 85 here-in-before Rear legs made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 85 here-in-before Front / Rear / Side rail of seat made of first class hard wood (Teak wood) of size and specification as per drawing.

All as per item No 85 here-in-before Stiffener of Back made of first class hard wood (Teak wood) of size and specification as per drawing.

All as per item No 85 here-in-before Short / long stiffener of bottom made of first class hard wood (Teak wood) of size and specification as per drawing.

All as per item No 85 here-in-before M&L for preparation of old polished surface of Chair Writing by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

Removing following old and unserviceable parts / components of “REPAIRS TO HAT STAND WITH MIRROR” and S & F new parts / components of same size, existing pattern and same material, with beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-233) 5 mm thick looking mirror of size and specification as per drawing. (Make of mirror : Modigaurd/Swastik/Saint gobin)

All as per item No 91 here-in-before 3 mm thick Veneered plywood of size and specification as per drawing.

All as per item No 91 here-in-before 9 mm thick Back Plywood of size and specification as per drawing. (Make of Ply: Century/Archid/Green ply)

All as per item No 91 here-in-before Aluminium Peg of size and specification as per drawing.

Removing following old and unserviceable parts / components of “SOFA 4 SEATER” and S & F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No - FD - 281 / 258 / 373) Arms made out of teakwood of size and specification as per drawing.

All as per item No 95 here-in-before Front leg made out of teakwood of size and specification as per drawing.

All as per item No 95 here-in-before Rear leg made out of teakwood of size and specification as per drawing.

All as per item No 95 here-in-before Batten for seat and back made out of teak wood of size and specification as per drawing.

All as per item No 95 here-in-before S&F for cushion foam of 40 density with fabric cushion cover for seat and back of SOFA SET 04 seater, Superior quality of foam & covertepesty cloth approved by GE not less than 340/- per R/Mtrs. (Drg No FD-281,373, 1113, FD/MAP-II/02) . (Make of cushion :Sleepwell/ kurlon/Godrej interio)

All as per item No 95 here-in-before S&F tepesty cloth of superior quality colour and shade approved by GE not less than 340/- per R/Mtrs.

All as per item No 95 here-in-before M&L for preparation of old polished surface of sofa set 4 seater by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

Removing following old and unserviceable parts / components of “SOFA SET 05 SEATER” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-281,373, 1113, FD/MAP-II/02) Arms made out of teak wood of size and specification as per drawing.

All as per item No 102 here-in-before Front leg made out of teak wood of size and specification as per drawing.

All as per item No 102 here-in-before Rear leg made out of teak wood of size and specification as per drawing.

All as per item No 102 here-in-before Batten for seat and back made out of teak wood of size and specification as per drawing.

All as per item No 102 here-in-before S&F for cushion foam of 40 density with fabric cushion cover for seat and back of SOFA SET 05 seater, Superior quality of foam & covertepesty cloth approved by GE not less than 340/- per R/Mtrs. (Drg No FD-281,373, 1113, FD/MAP-II/02) . (Make of cushion :Sleepwell/ kurlon/Godrej interio)

All as per item No 102 here-in-before S&F tepesty cloth of superior quality colour and shade approved by GE not less than 340/- per R/Mtrs.

All as per item No 102 here-in-before M&L for preparation of old polished surface of sofa set 5 seater by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

Removing following old and unserviceable parts / components of “TABLE DINING 1200 X900 X 760MM” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/03, TP) Removing of old u/s top of table 4' x 3' and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge.

All as per item No 109 here-in-before Leg made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 109 here-in-before Long rail made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 109 here-in-before Short rail made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 109 here-in-before Long bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 109 here-in-before Short bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing.

All as per item No 109 here-in-before M&L for preparation of old polished surface of table 4' x 3' by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish to match with existing polish as directed by the Engineer-in-charge.

All as per item No 109 here-in-before S & F wooden bracket made of first class hard wood (Teak wood) fixing legs to long and short rail veries type of woodend table(Table dining, table writing, Table 3x2, Bed plywood top) fixed with 2 Nos screw and duly polishing to match with existing complete as direction by Engr-in-charg.

Please Enable Macros to View BoQ information