CERTAIN TO DOORS, WINDOWS, FLOORING, SANITARY FITTINGS AND OTHER B/R MISC WORKS TO E/M INSTALLATION UNDER AGE B/R-II AT NAVAL STATION KARANJA

Amount

Dismantling AC (Corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and as directed

M&L 6 mm thick asbestos cement corrugated sheet in roof fixed with 'L' or 'J' type hook or crank bolts complete all as specified and directed.

S&F AC two piece adjustable serrated ridge for corrugated sheets in roof coverings, fixed witth 'L' or 'J' hook complete all as specified and as directed

Dismantling plain or corrugated steel sheeting ,any gauge ,thickness incl Nainital or similar pattern roof covering complete all as specified and as directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed

Taking down existing bitumen felt roof treatment including cement mortar bedding and cleaning the surface and removal outside the MOD land, complete all as specified and as directed by Engr-in-charge. Note :- 1. Taking down earthing strips incl insulators from roof for treatment and re-fixing of same with existing specification in the same position after laying APP membrance including replacement of broken insulators, PVC rawl plus & screws etc are deemed to be inclusive of rate quoted by the contractor. 2. Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work 3. APP work shall be carried out on PENT RCC roof at 12 -15 mtr height (non accessible roof).

Demolition in cement concrete ground floor and paving nexc. 15 cm thickness (below above ground floor ) complete all as specified and directed

M&L PCC (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof/chajja to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for applying oil bound primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the prepared dry roof surface and provide and lay 4mm thick APP modifed water proofing membrane reinforced with non-wooven polyster matt with physical properties as given in particular specification. The laying shall got be done through authorized applicator of manufacturer as specified in particular specifications. Provide over the membrane finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/sqm as prescribed by manufacturer of membrane including Ten years guarantee on prescribed form complete all as per particular specification , manufacturers instructions complete all as specified and directed.

M&L Applying one coat Bitumen water proofing aluminium heat resistance paint @ 0.10 kG/ Sqm over one coat of primer on the roof as per manufacture instructions complete all as specified and directed by Engr-in-Charge. Make : PLASCON/PLASCON or equivalent

M&L using ready mix plaster for rendering 10mm thick cement plaster in CM (1:3) on roof top surface including WPC by weight of 3% of total cement content complete all as specified and as directed. Note : WPC will be measured separately

Supply only water proofing liquid compound complete all as specified and as directed..

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed

-ditto- as per Item No.14 above but n.exc 1.5 sqm complete all as specified and as directed

Taking down shutters of any description exc 1 Sqm but nexc 2 sqm complete all as specified and directed.

S&F IInd class hard wood plain solid, straight, chowkats and frames wrought framed rebated on the solid , rounded or chamfered put together with glue pinned at joints.

S&F 35mm thick second class hard wood, plain framed, paneled shutter (Two panel) of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treated complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.. (Note: Stainless steel butt hinges shall be paid separately)

S & F extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and as directed.

M&L stainless steel Butt hinges medium weight, cold rolled and fixed 100 mm long complete all as specified and as directed.

S&F 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L PCC 1:3:6, type C1 (using 20 mm graded stone aggregates) coping or filling for hold fast without using extra cement complete all as specified and directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

M&L Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

S&F aluminium door/window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles including connected items, with and including rubber beading for 4 or 5mm thick glass, making good to the disturbed portion with its original specifications, complete all as specified and directed.

S&F concealed star lock powder coated for aluminium window fixed as per manufacturers instructions all as specified and directed.

M&L 4 mm thick plain glass sheets ordinary quality in any size, each pane fixed with rubber beading or oil putty for windows/doors/partition etc all as specified and directed.

S&F in repair aluminium anodized grill of design DG 104 pattern made out of 10mm dia rod Fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm &1.4mm thick all as per manufactures instructions complete all specified & directed.

S & F in repair for aluminium (extruded section) body hydraulically door closer regaulted, designation No.3 universal type, suitable for door shuttes of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

S&F aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and as directed

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.)

S&F 4 mm thick plain asbestos cement board as in false ceiling with and applying two coats of oil bound distemper over a coat of chalk whitening and making to good existing frame without disturbing the other false ceiling complete all as directed . (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.)

S&F PVC False ceiling consisting of 600 mm x 600 mm, 12 mm thick prelaminated self design PVC sheet of density 600 kg/Cum solid PVC panel including frame work made using aluminium T section of size (25mm x 25 mm, 18 gauge or 1mm thick) in square pattern of grid size of 605 x 605 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof salbs by means of ceiling cleats made out of GE flat 40x3 mm sie 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm angles complete all as specified and as directed.

S&F 10mm thick PVC false ceiling insulation panels board with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium / G.I/M.S. Making to good existing frame without disturbing the other false ceiling complete all as specified and as directed.. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.)

S&F false ceiling with Armstrong XL 24mm grid system of grid size 600x600mm with 14mm thick ceiling board of RH-90. including grid/ frame work made using aluminium T section of size (25mm x 38 mm, 18 gauge or 1mm thick) in square pattern of grid size of 605 x 605 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof salbs by means of ceiling cleats flat 40x3 mm size 60mm long and expansion hold fasterners 12.5mm dia 50mm long . The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm angles complete all as specified and as directed.

S&F in repairs 12 mm thick ceiling board of size 600mm x 600mm of RH-90 of Armstrong false ceiling and making to good existing frame without disturbing the other false ceiling complete all as specified and as directed. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.)

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

M&L Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing and rubbish off the premises outside MD land complete all as specified and directed.

M&L joint free for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with & including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.

M&L glazed coloured ceramic tiles in vertical surface 450x300x7mm or 300x200x7mm thick as in skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match and including 10mm thick backing coat in CM 1:6 etc complete all as specified and directed

M&L Machine cut kota stone kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with & including 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes complete all as specified and as directed.

M&L Machine cut kota stone slab 15- 20 mm thick in riser of steps, skirting, dado and pillers laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc, with & including rendering 10 mm thick on vertical surface for as for Kota stone ,terrazo tiles finishes in cement mortar 1:6 complete complete all as specified and as directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & pigments with red and yellow colour with & including 15mm thick screed bed in CM 1:6 complete all as specified and directed

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .

M&L PCC 1:4:8 type D2, using (40 mm graded agg) , 75mm thick as in sub base of flooring complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L PCC 1:2:4 type B1 using (20 mm graded aggregate) as in kerbing all around tile complete all as specified and directed.

S&F in repairs PVC tiles /sheets, of 2mm thick laminated plain coloured homogenous, laid with approved rubber based adhesive in floors complete all as specified and as directed.

M&L PCC 1:2:4 type B2, using (40 mm graded agg) ,100 mm thick as in flooring complete all as specified and as directed.

M & L PCC 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection without using extra cement complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified.

M&L using ready mix rendering 15 mm thick on fair faces of brick/concrete surfaces cement plaster in CM (1:4) , finished even and smooth without using extra cement, complete all as specfified and directed.

M & L using ready mix rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (with out using extra cement) complete all as specified.

M&L using ready mix rendering 5mm thick in CM 1:3 on ceiling finished even and smooth finish complete all as specified and directed.

Material and labour for preparation of new or previously untreated plastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litr and UV resistance as per IS: 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litres/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces or camouflage pattern on one coat of primer complete all as specified and as directed

M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed.

M&L preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

S&F in repairs vitreous china coloured half stall size 480x300x740mm urinal brass chromium plated brackets , fitting and waste coupling, CP bottle trap , urinal spreder , PVC connection etc complete all as specified and as directed

S&F fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including 32mm dia PVC waste pipe complete all as specified and directed.

S&F in repairs 15 mm bore fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding complete all as specified and directed.

S&F vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repairs complete all as specified and directed.

S&F in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed.

S&F in repairs fancy type bib taps chromium plated 15 mm dia cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15 mm dia PVC connection of length 450mm long complete all as specified and directed.

M&L for 15 mm dia steel tube medium grade galvanized with all fittings and fixed in wall, ceiling or laid in floor complete including taking up or down steel tubing and connections 15 mm bore complete all as specified and as directed.

M&L for 20 mm dia steel tube medium grade galvanized with all fittings and fixed in wall, ceiling or laid in floor complete including taking up or down steel tubing and connections 20 mm bore complete all as specified and as directed.

S&F CPVC water tubing 15mm bore pipe, SDR 11 including provision of all fittings and connected completed in concealed and surface, along with primer & slovent cement for joint as per ASTM D 2564, pipe material shall be as per ASTM D 1785, fitting/ flanges shall be as per ASTM D2467, including taking down old pipe line in concealed and surface all as specified and directed Note : Pipe and fittings made from CPVC shall be clearly marked with manufactures name and trade mark. manufacturer test certificate (MTC) shall be provided.

All as per Item No.77 above but 20mm bore CPVC pipe, complete all as specified and as directed

S&F in repair 100x100 mm ultra slim staitness steel heavy rain shower head, fancy type shower roses brass chromium plated with C P arms of length upto 60 cm for 15mm bore CP tube complete all as specified and as directed

S&F in repair 15mm pillar cock (auto closing system) jaguar (Code PRS-CHR-031L65) or equivalent brand as approved by GE all as specified and directed

S&F in repairs Vitreous China sensor Urinal of size 480x300x740 mm (Make: Jaguar, cat part No. URS-WHT-13255 or equavalent as approved by GE) required colour including brass chromium plated brackets ,waste coupling, PVC connection and waste pipe complete all as specified and directed

S&F in repair one piece square model water closet floor mounted Square Commode (White) S trap - white ceramic western commode (white) shape-Elongated type, size 685x360x720mm weight not less 20 Kg 'S' trap and slim seat cover & fitting as per Cera Cat Part No S1013164 or equivalent complete all as specified and directed

S&F in repair health faucet (brass) with hook & 1.00 mtr tube all as specified and directed

Demolition of pre-cast concrete block masonary built in cement mortar including all quoins, arches, pillars etc. and pre cast concrete articles complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks in 10cm in width in type B1 (1:2:4) and setting in mortar (1:6) complete all as specified and as directed

M&L for framed work such as grills, gratings,post of angle iron etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement

S&F mild steel round bars 10mm dia and over, in horizontal support for chain link straining of fencing including cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) complete all as specified and directed.

S&F mild steel screw bolts 10mm dia with hexagonal or square heads at one end and screwed at other ends dia of shank 5 to 10 mm and length of bolt exc. 5cm but n.exc 10cm complete all as specified and directed.

M&L PCC 1:2:4 type B2 using (40 mm graded aggregate) as in foundation, fillings and mass concrete complete all as specified and directed

Dismantling fencing wire mesh, any type all as specified and directed

S&F mild steel security chain link fencing 60mmx60mm with PVC coated mesh made out of 3mm dia MS wire and 1.00mm thick PVC coating throughout fixed to RCC post including binding wire complete all as specfied and directed.

S&F in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and strained and fixing to any type of standard rails straining bolts, etc. all as directed.1 each line wire to be measured)

S&F Rotational moulded Polyethylene (HDPE) Water Storage Tank 500 LITRE Capacity (Cylindrical Vertical with Closed Top), Black or white in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description including dismantling of existing water tank complete all as specified and directed

S&F Rotational moulded Polyethylene (HDPE) Water Storage Tank 1000 LITRE Capacity (Cylindrical Vertical with Closed Top), Black or white in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description including dismantling of existing water tank complete all as specified and directed

S&F Rotational moulded Polyethylene (HDPE) Water Storage Tank 2000 LITRE Capacity (Cylindrical Vertical with Closed Top), Black or white in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description including dismantling of existing water tank complete all as specified and directed

Taking down existing mild steel rolling shutters and including replacing the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover and side bracket etc wherever required and refixing in its original position after repairs including material and labour for greasing and mechanical old and new parts of rolling shutters complete all as per directed for shutters of area n. exc 10 sqm each, complete all as specified and directed.

-All- as per Item No.97 above but area of shutters exc 10 sqm and n.exc 20 sqm each

-All- all as per srl item No.97 but area of shutter exc 20sqm but not exc.50 sqm each Note for Srl Item No. 97, 98 & 99 (i) Spare parts will be measured and paid separatly under relavent items and Rate quoted shall include for scaffolding to any height , covering etc

S&F factory fabricated mild steel (hardened) helical wire spring of size 300mm long, 80mm dia to match with existing complete all as specified and directed.

S&F factory fabricated mild steel (hardened) helical wire spring of size 450mm long, 80mm dia to match with existing complete all as specified and directed.

S&F factory fabricated new guide of rolling shutter made out of 1.25mm thick mild steel sheet of grade Fe-310 or Fe-410 of required length to match the existing one and including one shop coat of red oxide primer complete all as specified and directed.

S&F factory fabricated side brackets made out of 1.25mm thick mild steel of grade Fe-410 or Fe-310-0 to match with existing including one shop coat of red oxide primer complete all as specified and as directed

S&F factory fabricated new mild steel slates of 1mm thick of grade Fe-410-0 or Fe-310-0 to match with existing fitted with locking clips, riveted to slates including one shop of red oxide primer complete all as specified and as directed

S&F factory fabricated mild steel of grade Fe-410-0 or Fe-310-0 2.5mm thick bottom lock plate riveted and made of mild steel sheet of 1mm and welded with and including provision of standard locking arrangement welded to and including mild steel angle iron complete to match with existing with and including one shop coat of red oxide primer complete all as specified and as directed

S&F factory fabricated hood cover of mild steel 1mm thick hexagonal, square or circular shape fitted to existing angle iron stiffness at bottom edge and to bracket plate all as directed and applying one shop coat of red oxide primer complete all as specified and directed.

S&F mild steel factory made bevel gear box with machine cut gears suitable for rolling shutters complete all as specified and as directed.

S&F mild steel pressed beval handles 150mm long, oval type, enamelled black complete all as specified and directed

S&F mild steel safety lever lock with 4 levers for rolling shutters complete all as specified and directed

M&L for Opening of rolling shutter hood cover, greasing to gears, helical spring and guide channels and refixing all accessories back in position of area n.exc 10sqm each complete all as secified and as directed.

M&L for Opening of rolling shutter hood cover, greasing to gears, helical spring and guide channels and refixing all accessories back in position of area exc 10sqm and n.exc 20sqm each complete all as specified and as directed.

S&F in replacement rolling shutter without ball bearing, thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank. complete all as secified and as directed.

S&Fin replacement rolling shutter without ball bearing, thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed

S&F framed work in doors or gates of angle or other section with gusset plates, rails, braces, holdfast etc, of grade Fe 410-W ( Gde E-250 ) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed.

M&L for preparing new or previously untreated steel surface of any decription over 10cm in width or girth and applying 2 coats of aluminium paint over one coat of aluminium red oxide primer complete all as specified and directed.

M&L for preparing old painted steel surface of any decription over 10cm in width or girth and applying one coats of aluminium paint complete all as specified and directed

M&L Painting to new or previously untreated steel surfaces including prepration applying one coat of red oxide primer and two coats of synthetic paint. complete all as specified and directed

S & F in repair Stainless steel hand railing with post as per design made out SS304 complete all as directed

S&F collapsible steel gates, top hungs consisting of channel pickets, provided flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfast and brackets including taking down old gate any type complete all as specified and as directed.

M&L for polyester powder coated aluminium fixed as wall partition medium weight aluminium section as Horizontal members size 63.5x38.10mm at 0.75 Kg/M C/C spacing shall not exceed 900mm Vertical member size 63.5x38.10 mm at 0.75 K/M C/C spacing shall not be more than 900mm all aluminium section of 16 gauge. Bottom portion -3' height portion, pre laminated board 12mm thick including necesary clips, rubbers beading aluminium beading and fixing to the adjoining/ existing wall/partition etc with all necessary fitting/ fixtures etc incl aluminium frame/ chowkhat for sliding door shutter of section 101.0x44.44 mm of gauge 16 fixed to masonery/concrete surface and aluminium frame (all section of such type having arrangement for fixing glass/prelaminated board on one or both sides as required) including powder coated aluminium fittings such handle (2 Nos each shutter), tower bolt, locks (mortise type lock) glazing clips, rubber packing, powder coated aluminium snap beading screw, stainless steel hinges 150mm long (3 Nos each shutter) etc and one door stopper two legged with each leaf (shutter) complete all as specified Note:- 1. Glass and prelaminated board to be paid and measured separately under appropriate item of sch A) 2. Item rate shall be include any height of wall partition for scafolding as all arrangement.)

M&L, for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the glass with rubber gasket, complete all as specified and directed by Engr-in-Charge. Make. Anchor/Kitply/Novapan

S&F in repair rubber beading suitable for fixing 4mm/ 5mm thick glass in aluminium window/doors/partition etc complete all as specified and as directed.

M&L post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.complete all as specified and directed by Engr-in-Charge

M&L post construction antitermite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed

M&L Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts, dunnage block etc. for fencing, average sectional area exc 100 sq. cm and not exc 250 cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed all as specified and directed

Dismantling of brick work built in cement mortar including all qoins, arches, pillars, etc.complete all as specified and directed

M&L for Brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed

S&F double side writing informatory stainless steel reflective sign board size 4'x3' with aluminium sheet base of 2 mm thickness having retro reflective tape base and font. Colour and matter of sign board will be furnished by Engr-in-Charge. The frame of sign board should be 2 " outer dia square Stailness steel pipe and having 2 legs of stainless steel square pipe 9' long each of 2" outer dia square pipe the board should be grouted in PCC work of size 300x300x450 mm including taking down of old sign board complete all as specified and directed

S&f Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410 W (Gde-E-250) quality-A all as specified and directed

M&L for attending/rectify day to day complaint to rectify the service for all type of Carpentry repair i.e. Chowkhat, door/window shutter of aluminium and wooden both, Builder hard ware and day to day repair works within time frame, tradmen shall have minor spares such as Screw, nut, Nail, Clips, Ladders, Ghori, Rehri, Drill machine, hamper machine etc.and all necessary T&P reqd to rectifiy the complaint complete all as specified and as directed . Note: a) Main spares/ parts shall be measured and paid under seperate item here in after as supply only, at Naval Station Karanja in a shift of 8 hrs per day, Miniumum 01 person shall be present on all working days 0900 hrs to 1700 hrs to attend the above complaints/ maintenance and reporting the progress to AGE B/R-II Sub Divn Karanja complete all as specified and directed by Engr-in-charge. b) Complaint register/slip shall be provided at the time of claiming the payment. c) If Contractor fail to attend the complaint on same day a recovery of Rs. 200/- per day per complaint shall be made from his dues. (date of issue of complaint slip and date of rectification of complaint will be the base of recovery) d)The contractor shall arrange the man power as and when required any numbers any time between 9.00 AM to 5.00 PM e) Items issued under complaint slips out of supply only items shall be recored in MB with reference to complaint slip docket No and old materials retrieved shall be issued to contractor under credit schedule.

Supply only wooden beading size 20x20 mm

Supply only Fevicol 1 Kg pack (self adhesive resin)

Supply only Gypsum Screw wood steel 25mm (200 Nos pkt)

Supply only Gypsum Screw wood steel 40 mm (200 Nos pkt)

Supply only Gypsum Screw wood steel 50mm long (200 Nos pkt)

Supply only Gypsum Screw wood 75mm (200 Nos pkt)

Supply only Aluminium sliding door bolt 300mm with fixing of clips 3 Nos with fixing with nut & bolt

Supply only Aluminium plane sheet 0.56mm thick

Supply only Aluminium tower bolt 150mm bolt dia 10mm

Supply only Aluminium Handle 150mm Long

Supply only Aluminium Handle 100mm Long

Supply only Al Powder Coated curtain rod 12 Feet Long

Supply one SS curtain bracket/ supports and side pelmets

Supply only Door stopper 75mm single leg stainless steel

Supply only Aluminium door closer hydraulic regulated

Supply only MS Butt Hings 100mm

Supply only MS But hinges 50mm

Supply only SS tower bolt 150mm bolt dia 10mm

Supply only SS tower bolt 200mm bolt dia 10mm

Supply only SS Wire Mesh 0.36mm dia and 1.40mm aperture, 1.2mx15 mtrs Long

M.K Enterprises

INDIA ENGINEERS AND CONTRACTORS

Shri Krishna Trading Corporation

S.P.TRADERS

M/s S.D Construction Co