Civil Works for up gradation of AODAD section, Finance section in Admin-1, COP office, Guest house and other misc. works in HAL

Removing the existing MS fully glazed/wooden windows having approx. size 1.50m x 1.20m from plastered brick wall by cutting the holdfasts and handing over the useful material to stores within a lead of 200m (approx.) including cost of tools, labour, transportation , cleaning the site at all heights all as specified and directed by EIC.

Removing the existing MS grills having approx.height 1m from plastered brick wall by cutting the holdfasts and handing over the useful material to stores within a lead of 200m (approx.) including cost of tools, labour, transportation , cleaning the site at all heights all as specified and directed by EIC.

Demolishing of existing gypsum/plywoord false ceiling and sorting / stacking the useful materials and removal of debris including cost of tools, labour, transportation etc., with a lead of 500mts including cost of tools, labour, transportation etc., all as directed by EIC.all as directed by EIC.

Demolishing the existing cement plastered brick masonry made in Cement mortar of any thickness/concrete as directed and sorting / stacking the useful materials from site with a lead of 500mts including cost of tools, labour, transportation etc., all as directed by EIC.all as directed by EIC.

Removing and refixing of prefabricated partitions of Godrej make with a lead of 100mts including cost of tools, labour, transportation etc., all as directed by EIC.all as directed by EIC.

Earth work excavation for foundation of retaining walls,columns,etc., depth not exceeding 1.50 m in hard dense soil, other than rock including dewatering if required, getting out and stacking the earth including cost of tools, labour, transportation etc,with a lead of 1000mts including cost of tools, labour, transportation etc., all as directed by EIC.

Providing and laying plain cement concrete (PCC) 1:3:6 using 20mm down graded hard granite i.e. stone aggregate for foundation, floor etc., wherever required, at all depths including mixing, placing in position, proper compacting,surface preparation curing, cost of all materials, labour, tools, transportation and all other incidental charges, etc., complete all as approved directed and specified by EIC

Demolishing the existing plain cement concete 1:3:6 made of any thickness as directed and sorting / stacking the useful materials from site including cost of tools, labour, transportationupto a lead of 500mts etc., all as directed by EIC.

Removing old Aluminum/wooden partitions/wall cladding by carefully removing glass,Powder coated Aluminum members of different sections and boards of any description at any height / position and handing over the useful materials to stores including cost of all tools, labour all as directed by EIC

Removing old damaged PVC sheet flooring of any thickness sticked to concrete / Mosiac floor, stacking them in rolls and handing over to stores carefuuly with in a lead of 300m including cost of tools,labour,taxes etc all as directed by EIC.

Removing the old ceramic/ vitrified floor tiles/dado/skirting of any thickness as directed by and sorting / stacking the useful materials and removal of debris to a lead of 1000 M includig cost of all tools, labour , transportation etc, all as directed by EIC .(Debris should be collected in a gunny bag and disposed safely)

Providing and constructing brick work with best locally available frogged flyash bricks in CM 1:4 for walls at all levels and for all thickness in standard bonds including raking out joints 10mm deep to receive plaster, chipping of existing brick walls / concrete surfaces where ever new walls are meeting in order to arrest cracks, applying cement slurry before constructing wall to have proper bond, necessary scaffolding, curing etc., complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.

Plastering external/internal brickwalls / concrete surfaces with C.M 1:4, 20 mm thick trowelled to even and smooth finish including cost of all materials, labour, curing, scaffolding, at all heights,etc. at heights mentioned below including material,scafolding etc as directed by EIC.

Supplying and Fixing Glazed vitrified floor tiles polished finish of (KAJARIA / NITCO / JOHNSON) make of size 600 X 600 mm, 10mm thick, for floors of approved design and pattern fixed over CM 1:6, 20 mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3 kg/sq.m or with laticrete of 6 to 8mm thickness of consistency as per manufacturers specification as directed and jointed with approved joint filler of matching colour / shade etc. complete, with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Providing and erecting partly glazed and partly panelled powder coated Aluminium partition (low height/full height) using standard sections of JINDAL or HINDALCO so that each pannel shall not exceed 1.20 sqm with 12mm thick pre-laminated board having twin finish of Novopan / TESA in bottom rows and 5mm thick float glass of MODI / ST GOBAIN on middle and top rows including glazing clips, rubber gasket for fixing the glass, filling gaps with silicon sealant etc. Aluminium members to be extended and fixed upto slab. Specification for aluminum sections to be used is a) Bottom members- 95.25 x 44.45 x 2.00mm is partition is erected from ground level b) Top / vertical members - 63.50 x 38.10 x1.95mm c)Middle memebers - 63.50 x 38.10 x 1.95mm .

Providing, manufacturing and erecting Partly glazed and partly panneled Double / single leaf Aluminium door using standard anodized powder coated sections of JINDAL, HINDALCO make as detailed below all of approved make.(Including necessary screws,fasteners,cleats,rods etc.Specification for each shutter :-a) Bottom members -97.30 x 44.45x 2.15mm b) Top members - 47.62x44.45x1.95mm c) Side member - 47.62 x 44.45 x 1.82mm d) Middle member - 49.91 x 44.45 x 1.60mm; Door member of SL NO19566 of JINDAL e) 12mm thick pre laminated twin finish exterior grade of Novapan MFPB (PTX) - Superior grade or TESA / ASIS / ARCHIDPLY or any other particle board having ISI Mark or 12mm thick both side finished MDF boards f) Glass - 5.00mm thick plain float glass of MODI / SAINTGOBAIN make g) Rubber gaskets - Good quality of approved make h) Glazing clips - Weight of 0.097Kg/RM. I) Aluminium hinges 125mm long - 3Nos j) Aluminium handle 150mm long - 2 Nos. k) Concealed lock of make godrej/sheel 4 lever l) Aluminium tower bolts 200mm long - 2 Nos. m)Miscellaneous -Al. cleats, screws ,Door sealant,PVC push/pull stickers on glass. etc

Supplying and fixing in position(at any ht.& level) three track glazed Aluminium powder coated sliding windows with sections conforming to JINDAL catalogue including providing & fixing 4.8mm thick plain float glass of MODI/ SAINT GOBAIN make panel with Galvalized wire of aperture 1.4mm and nominal dia 0.63mm for one shutter of approved guage & opening all as per directions of EIC and as approved quality rubber/nylon gaskets, providing and fixing standard Aluminium 75mm handles locking arrangement, necessary wheel/rollers etc.,the windows shall be fabricated with Aluminium extrusions as described below of series B: a) Bottom member three track section 92 X 31.75 X 1.50mm b) Top & sides of 92 X 31.75 X 1.50mm. c)Shutter top & bottom 40X18X1.29mm d) Shutter interlock 40X27X1.29mm e) Shutter handle side 40X18X1.29mm complete along with as specified and as directed by EIC.[Gaps between wall/beam and Al. member shall be filled with silicon and made good.]

Providing & fixing False Ceilling at all heights with GRG (Glass Fibre Reinforced Gypsum) semi perforated 12mm thick micro tegular edged false ceiling tiles of size 595mm x 595mm of approved texture, design and patterns of Diamond Ceilings make or equivalent product from St.Gobain / ARMSTRONG make having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225 :1987, Non combustible as per BS 476 (Part-4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal levels suspended on inter-locking metal Silhouette Grid of hot dopped galvanizediron section of 0.33mm thick (galvanized @ 120 GSM including both sides) comprising of main-T runners of size 15x32mm of length 600mm to form grid module of size 600mm x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 GSM) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm c/c and 40mm long dry wall wood screws. The work shall be carried out as specified and directed by EIC.

Complete removal of old Cement painted surfaces of internal walls including cornices, pilasters mechanically or manually by using sand paper, dusting, brooming, scrapping to smooth surface, washing,etc and cleaning of dust complete all as specified and directed by EIC.

Providing and applying on prepared surface and applying two coats of interior Plastic emulsion paint of Asian paints or equivalent make of approved shade over a coat of primer Asian paint or approved make with rate including cost of all materials, tools,labour ,scaffolding,wastage, etc., complete at all as approved, specified , all made good and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.The rates include for: (a) Use of all scaffoldings and cradles including hoisting and lowering.(b)Taking down, cleaning as directed and refixing blinds and fittings, picture rods, cornice poles and small items of builder’s hardware such as door knobs, finger plates, escutcheons, hooks etc. which are not required to be painted. (c) Use of dust sheets and other coverings for the protection of fixtures, fittings, furniture, etc. (d) Shifting of movable cupboards and furniture as required and replacing in position. (e) Work in patches (over one square metre each) including matching with existing work and marrying in at the edges. (f) Removing all splashes, drops, dirt, etc. and leaving premises in a clean state.

Supplying and applying approved quality approx 1mm thick wall care putty to walls(internal/external) surfaces from Asian paints/Wallplast/BIRLA make and carrying out punning to obtain smooth & even finish using EMERY paper 180 including cost of material, labour, wastage etc.,complete all as approved,all made good, specified and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.

Supplying and fixing non-skid ceramic floor tiles as per IS of size not exceeding 300 mm X 300mm of 7-8mm thickness of KAJARIA or JOHNSON or NITCO make of approved colour and design over a screed of CM 1:6 and 25mm average thick and pointing with white cement mixed with matching pigment etc including cost of all materials,labour,wastages,taxes etc as all as specified and directed by EIC.

Supplying and fixing Coloured Glazed Vertical cut Ceramic Wall tiles of 7mm thickness as per IS of size not exceeding 300mm X 450mm for dado of KAJARIA or JOHNSON or NITCO make, colour and design, over a screed of cement mortar 1:6 of 20mm average thick including hacking ,chipping the existing brick wall surface, pointing with white cement mixed with matching pigment etc complete as approved, specified and directed by EIC.(payment for screed in CM 1:6 will be measured under plastering item)

Supplying and Fixing for kitchen platform 18-20mm thick polished/semipolishedFlamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent for flooring and black galaxy for borders), texture and finish, jointed with cement slurry and pointed with cement mixed with pigment to match the colour, including wastages,curing complete with rates including including rubbing, curing, finishing, providing holes of required diameter, providing opening to fix counter basins, cost of all material,labour,tools,transportation etc., complete all as approved, specified and directed by Engineer In Charge.

Supplying and fixing of Stainless steel sink with solo single bowl with drain board, in parryware/prayag/equivalent make 1.00mm thick with plug, waste pipe, washers, with ISI mark and 304 grade including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm including cost of materials, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing light coloured glazed porceline European water closet (EWC) of Parryware / Cera/make of model no-C0297 confirming to IS: 2556 with 'P' or 'S' trap with or without vent set or equivalent in Hindware/Prayag make, including supplying and fixing 10 Ltrs capacity valve less syphonic action type PVC low level cistern confirming to IS: 774 with brackets, double flapped anti microbial seat cover confirming to IS: 2548 - Part 1 and 2, 40 mm dia PVC bend, 15 mm dia High density PVC inlet pipe connection, 15 mm dia CP angle stop cock with all above of approved make, colour etc. complete all as approved, specifed and directed by the EIC.

Supplying and fixing angle cock model no F320006 from Hindware make or in Parryware/CERA make or equivalent product all approved quality complete,with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing CP health faucet product from PARRYWARE / HINDWARE / CERA / Prayag make along with 1meter long flexible tube and wall hook complete, with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing long body bib cock of Hindware/Parryware/or equivalent product all approved quality complete,with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing table top wash basin of model-EVITA-10101 from Hindware make or equivalent product in PARRYWARE / PRAYAG / CERA make including pillar cock of model no F400001 of Hindware make ,450mm long in let connection pipe of kohinoor make,6" waste coupling , waste pipe,waste coupling all approved quality complete,with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Providing and fixing gun metal gate valve (brass) of 20mm approved quality, High or low pressure, with plastic floats complete including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.

Supplying & fixing ' B' class or Medium grade 20mm dia G.I pipes of Tata or Zenith make complying to IS with rate including cost of all materials,transportation,etc all as approved /specified and directed by EIC.

Providing ,laying and fixing 110mm dia PVC SWR NAhani trap, plain with CP grating on top including jointing with solvent cement, rubber ring / gaskets etc., including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures ,solvent cement, rubber gasket, incidental charges, taxes, duties, levies etc., complete as directed and approved by EIC .

Providing ,laying and fixing 110mm dia PVC SWR drainage pipes fixed to walls, in floors including tees,bends,rubber rings,etc of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing ,laying and fixing 75mm dia PVC SWR drainage pipes fixed to walls, in floors including tees,bends,rubber rings,etc of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing ,laying and fixing PVC SWR vent cowl drainage pipes fixed to walls, in floors including tees,bends,rubber rings,etc of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Supplying and Fabricating TMT (Fe 500 grade) reinforcement bars of all diameter, conforming to IS, for reinforcement in RCC works as per drawings, including cutting, bending, lapping, hooking, welding wherever required and placing in position with binding wires at all levels and position. Binding wire shall be of approved quality and of 16 SWG, complete with rates including cost of all material, labour, wastages, transportation charges etc., all as directed and approved by EIC.

Supply and Fixing wood grain printed PVC door frame of Rajshri make or equivalent approved make section 50x47mm made of 5mm rigid PVC Sheet mitred at corners and jointed with 150mm long bracket 19x19mm MS square tube of minimum 19 guage and provided with EPDM gasket or seal provided through out the frame of approved make, size etc. including cost of all materials, labour for making ,fixing to the walls ,transportation, duties ,taxes etc. complete as directed and approved by EIC.

Supply and fixing 30mm thick solid paneled PVC shutters of Rajshri make or equivalent approved make of app size 0.70x2.10 mt made out of MS square pipe of 19x19mm for styles and 15x15mm for top and bottom rails of minimum 19 guage thickness covered with heat moulded PVC channel of 5mm thick and 30mmx50mm section to form styles and 5mm thick and 75mm wide PVC sheet for top rail, lock rail bottom rail on both side and 5mm thick PVC sheet fitted into the MS frame wielded/sealed to the styles and rails with 5mmx30mm PVC sheet beading on both sides and jointed together with solvent cement, silicon sealent etc. of with all fittings like aluminum aldrop,MS hinges etc approved color/make/manufacturer and fixing to the PVC door frames of any size including cost of materials ,labour,taxes,duties,completed and all other incidental charges as directed and approved by Engineer In Charge.

Supply and installation of vertical blinds of approved colour with guide channel of VISTA/TOUCH make or equivalent including ,material, labour,taxes etc all as approved and directed by EIC.

Supplying and sticking UV protected sun control / frosted film having 25 micron thickness over glass panes of windows,partitions and doors including material,labour,wastage etc as directed by EIC.

Supplying and Fixing 18-20mm thick polished/semipolished Granite slabs for flooring and skirting of required size of approved quality, colour( Sadarali grey,Jet black,Lavender blue / Shimoga Red for flooring and black galaxy for borders), texture and finish, jointed with cement slurry and pointed with cement mixed with pigment to match the colour, laid over a screed of Cement Mortar 1:4 (One cement : four coarse sand), 25mm average thickness including wastages,curing complete with rates including including rubbing, curing, finishing, providing holes of required diameter, providing opening to fix counter basins, cost of all material,labour,tools,transportation etc., complete all as approved, specified and directed by Engineer In Charge.

Supplying, fabricating by welding and erecting M.S rolled structural members like I-Beams,channels , angles,M.S pipes, MS square pipes,pipes, chequered plate,plain flats etc in position as per the drawing by mechanical means of TATA, SAIL, RINL make conforming to IS specification including lifting,hoisting,fixing in position by welding at site,bolting and providing two coats of Synthetic Enamel over a coat of Zinc Chromate primer of ASIAN paints, ICI, BERGER or equivalent make all as specified and directed by EIC.The relevant code of procedure for rolled steel section dimensions, welding ,erection and hoisting and tolerances allowed shall be complied.

Supplying ,carrying to site all approved materials providing and fixing in position pre-painted / colour coated galvalume profile sheets for Gazebo roof (Mangalore tile pattern or matching with the profile of existing roof sheeting)of 0.50 mm thick.(Total coated thickness),550 Mpa minimum,yield strength ,It shall be coated with hot dip alloy of 55% aluminium 43.50 % zinc 1.50 % silicon and finished with resin coat on both surfaces@150 gm/sqm of coating (Total both surfaces) having overall width & laid width as specified & shall be fixed using , the self drilling self tapping screwes shall be of required size as per site condition and the screws shall be fixed at suitable intervals as per standards procedure and direction of EIC. The contractor has to provide screw caps suiting the matching colour of sheet to avoid corrosion due to weather action and to give asethetic look. The make of screws shall be from HILTI,CORROSHIELD & BUILDEX.Penetration & side as well as end laps in sheet shall be sealed by using butyl sealant taps and silicon sealant.HDPE fillers shall be provided wherever required to close voids between sheets,sheet & fasteners etc,necessary overlaps as per manufacturers specification shall be provided. Make-JINDAL or equivalent all complete as per direction of EIC.

Providing 304 Grade Stainless Steel grab bars (preferably round pipes) of any size,thickness,shape etc of Jindal or equivalent make including SS holdfasts, SS flanges,etc of approved size and make including bending of pipes to required angle,polishing / buffing,etc and fixing the same in . The rate shall include cost of all materials,bending,fixing,welding,charges,transportation,taxes, wastage,etc all as specified and directed by EIC.

Providing 304 Grade Stainless Steel chain of 5mm thickness of any size,thickness,shape etc of Jindal or equivalent make including SS flanges,etc of approved size and make including bending of pipes to required angle,polishing / buffing,etc and fixing the same in . The rate shall include cost of all materials,bending,fixing,welding,charges,transportation,taxes, wastage,etc all as specified and directed by EIC.

Supplying and laying PVC flooring 2mm thick as per IS 3462 / 1986 homogeneous composition of POLYFLOOR/ARMSTRONG/KINETIC POLYMERS make & approved shade in rolls of 1.5m width laid on existing Mosaic / concrete floor after cleaning the surfaces thoroughly with soap water, cleaned dry, filling gaps/holes with plaster of paris, laying PVC flooring with welded joints using approved rubber adhesives, free from any air bubbles cleaning of laid surfaces with liquid soap to obtain a neat surface free from any stains all complete with cost of all materials,wastages, labour as directed by EIC.

Providing half round nosing of edges of granite slab of 20 mm thick including polishing etc, complete as specified and directed by Engineer In Charge.

HAL/HD/CE/T/24-25/27

HAL/HD/CE/T/24-25/27

Civil works for up gradation of AODAD section, Finance section in Admin-1, COP office, Guest house and other misc. Works in HAL

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II