04/CEE/BSNL/BGL/24-25

Amount

Supplying and Replacing following piano type modular type switch/ socket electronic fan regulators on the existing switch box/ on junction box including connections etc. as required. (Make:-M/s.Anchor or SS make) a) 5/6 amps switch

b) 2 way 5/6 A switch

c) 3 pin 5/6 A socket outlet

d) 15/16 A switch

e) 6 pin 15/16 A socket outlet

f)100Watt Two module step type electronic fan regulator

g) 2 plate, 6A ceiling rose on the existing junction box/ wooden block

h) Fancy 6A, 240 volts angle holder

i) 6A, 1Way Switch , 1 Module (Anchor Ziva)

j) 6A 3pin Modular socket (Anchor Ziva)

k)Two module step type modular electronic fan regulator

l)10A, Bell Push Switch with Indicator, 2M

Supplying and fixing of following Modular box with plates on surface of wall etc as reqd. a) 2 module PVC surface box with plate

b) 8 module PVC surface box with plate

c) 12 module PVC surface box with plate

S&F of 16A double combine with 2No switches & 2No sockets with box on surface of wall including interconnections etc as reqd. (CONA/Anchor or SS Make)

S&F of 6A double combine with 2No switches & 2No sockets with box on surface of wall including interconnections etc as reqd. (CONA/Anchor or SS Make)

S&F of 9W LED bulb in exisiting angle holder etc as reqd

S&F of 24W 4ft LED batten on surface of wall/ceiling suitable for 230 volts, 50Hz AC supply etc complete as reqd. (M/s.Havell's/Compton or SS Make)

S&F of 10W LED type bulkhead fitting made of polycarbonate with etc complete as reqd.(Crompton/Philips or SS Make)

Servicing of 25 litres capacity Geyser i/c dismnatling & transportation to workshop for descaling and back to site reisntallation etc as reqd.

SITC of 25 litres capacity vertical type storage geyser suitable for 230 volts, 50Hz AC supply with suitable length cold water inlet & hot water outlet hose pipes etc as reqd. (M/s.Racold CDR DLX or SS Make)

S/F following size exhaust/ ventilation fan suitable for 1Phase, 230volts, 50Hz AC supply & testing commissioning etc as required. (Make: Crompton/Havells or SS make ) a) 300mm sweep

b) 150mm sweep

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/PVC casing & capping as required. a) 3 x 1.5 sq. mm

b) 3 x 2.5 sq. mm

Supplying and fixing of following sizes of PVC casing and capping with all accessories etc as reqd. (Avonplast or SS Make) a) 20 x 10mm

S&F of 3mm thick phenolic laminated sheet cover with brass washer & screws on the exisitng MS switch boxes i/c cutting the slots for switch, socket & electronic fan regulators

Servicing of 1.5TR Split AC units, by removing the units external covers, cleaning of all internal parts i/c evaporator coil, filters, lubricating the moving parts, replacing the wornout minor items like bolt & nuts etc., cleaning of condenser coil, checking of all the accessories/components, tightening of all bolts, nuts, connections complete etc., as required

S&F of 30W high power LED street light fitting on existing pole complete with all accessories such as LED bulb suitable for 230V, 50Hz, AC supply, fixing on the existing bracket, interconnections, transportation, arranging ladder etc., as reqd. (M/s Crompton Greaves / Havells or SS)

Supplying & Fixing of weather proof box of size about 200mm x 140mm x 95mm deep made of SMC with 1No 6Amp SP MCB with din channel, 6way bakelite connector i/c fixing on the exisitng fixing arrangment, etc as reqd [M/s Sintex or similar approved make]

S&F of GI Twin bracket made of 50mm & 25mm dia 'B' class GI Pipe of lenght 300mm leach with necessary nut bolts for installation 30W LED Street light with top cover i/c cutting, welding, painting with similar colour, providing necessary hardware for fixing on the existing pole etc as reqd

Disconnecting & removing the street light pole MS Box and burnt cable along with gland from the street light Pole. S/F of Clamp made of 20mm x 5mm MS flat apprximate 0.4mtr long on the exisitng street light pole i/c drilling holes on the MS flat, providing nut, bolt and washers etc as reqd.

S&F of 18W watt round surface LED fitting suitable for 230 volts, 50Hz AC supply etc as reqd. (M/s. Crompton or SS make)

S& F of 16" wall mounting fan suitable for 230 volts, 50Hz AC supply etc as reqd. (M/s.Crompton/Havells/ or SS Make)

SRI NARAHARI ELECTRICALS