Municipal Council Banswara SITC of Traffic Signal Light at Maharana Pratap Circle Banswara

supply and erection fo galvaznixed iron pole to ve used as traffic singal pole with gaivanizing done in single dipping (Average coating thickness miminum 65 Microns) tapened poles having octagonal /circular cross-s-sections designed to withstand the maxmimu wind speed as pre IS 875,The Pole shaft shall be made form sheet steel (HT steel Conforming to grade S 355JO)and confirmng to BSEN 10025 and shall be continuously tapered with single longitudinal welding there shall not be any cirumferential welding.the welding fo pole shaft shall be done by submerged ArC welding (SAW) procees .pole shafts shalla be provied with the rigid flange plate of suitabel thickness(FE 410 conforming to IS 226/IS 2062 with provision for 4 no foundation bolts this base plate shall be fillet welded to the pole shaft at two locatiosn I.E from inside and outside.the octagonal poles shall have lockabel door of approximate 500 mm length at the elevation of 500 mm from the base plate whit bakelite sheet hvaing 6A SP MCB and 16 sqmm stud type connector (4nos) inside the pole at door openign for cable connecton of following length and dimension asper table P-01 with base plate and foundation bolt on the Existing cement concrete foundation .All ap per approved by Engineer in Charge.for additional technical parameters fo products/workrefer annexure "A" Attached with this BSR. Poles with OCtagonal Cross Section 9 MTR

S.I.T.C. of programmable three digit digital countdown timer with 5mm dia. Red colored LEDs of high intensity (visible clearly at day time) of reputed make with digit size 150mm x 300mm approx. and quantity of LEDs be approx. 800 no.s including interconnection with traffic signal controller and housing the LED assembly in sheet metal box of size approx. 750mm x 550mm with detachable pole arms clamps etc. as required.

S & Laying following size ‘B’ Class G.I. Pipe confirming to IS: 1239 P-1 (1990) with accessories for laying earth conductor/ strip/ cable in ground/ surface/ recess as 50 mm dia.

S.I.T.C. of following colour retrofit LED matrices traffic light of modular size 300 mm dia, Covered with front clear acrylic sheet and back with aluminum body, InP/InGaN based 5mm dia. Coloured LEDs of ultra bright. Super intensity (visible clearly at day time up to distance 300-600 meter, viewing angle of 30 degree). The unit shall be suitable for working on A.C. supply (160-240 V) and life cycle approx. 10 yrs with power consumption below 24watts, suitable for fast switching.Red Round (unit of 200-220 Nos LEDs)

Amber Round (unit of 200-220 Nos LEDs)

green Round (unit of 200-220 Nos LEDs)

Green Arrow (Unit of 120-130 Nos LEDs)

Add extra for SITC of M.S. housing for LED matrices

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 2.5 Sq. mm*4 core

SITC of microprocessor based logic type automatic electronic controller conforming to IS:7537 for traffic signals complete with electronic timer , control board, blinker unit for night operation and slip lane, day time peak hour operation, The controller shall have 12 Signal phases, 25 Signal plan, 24 cycle plan, 24 Signal split/ cycle, 4 Day plan, 32 Cycle switching/ day, 20 Selective Day plan/ annum, 16 Conflicting condition, 28 Signal Line, Solid-state relay switching, RS 422 Communication interphase, Manual override facility, up gradable vehicle actuated system, also have method of traffic control with fixed time isolated intersection and cable less/ cabled interlinking for synchronised operation. The controller unit shall be totally enclosed in 1.6 mm thick metal box including making