GE/SRA/T-25/2024-25

Amount

Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., removal of debris outside AF land complete all as specified and as directed.

M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

Taking down cement plaster on wall of any description hacking for key scrubbing down with water including racking out joints and removal of debris outside AF land and disposed off complete all as specified and as directed..

M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as "Supply only".

Supply only Liquid water proofing compound, conforming to IS and/or as approved, complete all as specified.

M&L for preparation of newly plastered surfaces and applying exterior wall putty 1.5 mm thick for smooth surface and finished with two coats of exterior acrylic emulsion paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade (in camouflage pattern) over a coat of suitable exterior primer, applied with rollers to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufactuirer's instructions, upto 4 storey height complete all as specified and directed.

M&L Rough Cast Plaster on Brick Walls upto double storey consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L preparing newly Rough Cast plastered surfaces of Walls and applying two Coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade (in camouflage pattern) over a coat of suitable exterior Primer (as per Manufacturer's instructions), complete all as specified and as directed.

S&F in repairs galvanized 2 strand steel barbed wire fencing conforming to IS : 278, with 2.24 mm dia. barb wire conforming to IS : 280 with zinc coating as per IS : 4826, barbed with 2 mm dia. barbs at 75 mm spacing and straining and fixing to any type of standard rails/RCC fencing posts straining bolts, including securing or tying at crossing with and fixing of galvanized mild steel wire, staples or steel pins etc., incl dismantling of existing barbed wires complete all as specified and directed. (Note: - Each line of wire will be measured)

Restraining, re-securing and making good existing galvanised steel barbed wire, 2 strand, of any description over boundary wall, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S&F in repairs concertina coil (reinforced punched barbed tape single layer) for fencing work complete all as per following specifications :- (i) Diameter of concertina coil - 900 mm dia (before stretch) (ii) Number of turns in concertina - 50/51 turns (iii) Weight of each coil - 12.50 KG (iv) Coverage per coil - 8 to 10 m (v) Central core wire - made from high tensile spring steel core wire conforming to IS-4454 duly hot dipped galvanised (conforming to IS-2629) with diameter 2.59 mm + 0.05 mm, UTS 145-160 kg/sqmm, zinc coating 250-300 grams/sqm (vi) Strip - Electro galvanised steel strip 0.5 mm + 0.02 mm thick, width 19 mm (before wrapping on central core wire) conforming to IS-1573, zinc coating - 120 gram/sqm and bituminised dipped, width of barbs 11.5 mm, pitch of barbs 25.4 mm+ 0.2 mm

Item No. 11 (contd....) (vii) Clips - AISI 304-1.5 mm thick 'C' & 'U' clips. 'C' special type for fixing coil and RBT wire, 'U' clips special type for joining one coil to another coil and RBT wire to RBT wire joining. (viii) No. of clips - minimum 125 for each coil (ix) Handle and spikes to be provided as required (NOTE : 1). RBT wire for fixing of concertina coil will be measured and paid seperately. 2). Running length of the wall shall be measured for payment purpose.

Supply only GI RBT wire of high tensile strength of 165 kg/sqmm with tape (0.52 mm thick) and weight complete all as specified and directed.

Dismantling mild steel steel work of any description not otherwise provided for, complete all as specified.

M&L for Rolled mild steel sections as in 'Y' section for fixing of barbed wire etc, cut and fabricated to the required shape and size and fixed on top of boundary wall, conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparing new or previously untreated steel surfaces of any description by applying two coat of synthetic enamel paint (first quality) over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L preparing old Decorated/Treated Plastered surfaces of Exterior Walls by brooming down or steel wire brushing and scraping down, filling of cracks with suitable paste and applying with rollers One Coat of Exterior Emulsion Paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade (in camouflage pattern) complete all as specified and as directed. NOTE : Rates quoted by the tenderer shall be deemed to include for the following applications as under:- (a) Surfaces shall be cleaned properly to remove loose dirt or dust, lichen, algae, fungi or any organic growth by use of stiff brush, washed well and allow water to dry. (b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with white cement putty or with Plaster of Paris. (c) All safety measures for the safety of workers shall be ensured by contractor before execution of work. Deptt shall not be liable for any untoward incident. (d) Quoted rate shall be deemed to include cost of necessary scaffolding as required for a height of building/boundary wall not exceeding 3.5mtr (Approx). (e) Contractor shall bring the required quantity of material in two lots in sealed containers after approval of Make/sample and keep in MES store under custody of JE/Engr-in-charge.

M&L for preparing old decorated/painted steel angle/surfaces of any description over boundary wall by applying one coat of synthetic enamel paint (first quality) complete all as specified and as directed. NOTE : Rates quoted by the tenderer shall be deemed to include for the following applications as under:- (a) Scope of work consists of painting to angle iron sections over boundary wall fixed as support of barbed wire and concertina coil and the work needs to be carried out between the existing barbed wire and concertinal coil. Contractor shall quote his rate considering the above aspect and no claim shall be admissible at a later stage. (b) The surfaces shall be cleaned to remove loose dirt or dust, lichen, algae, fungi or any organic growth, loose paoint, rust by use of stiff brush, washed well and allow water to dry before painting. (c) All safety measures for the safety of workers shall be ensured by contractor before execution of work. Deptt shall not be liable for any untoward incident. (d) The quoted rate shall deem to include the cost of necessary scaffolding and form works as required for a height of not less than 3.5mtr (Approx).

Demolition of Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.

M&L for Cement Concrete 1:4:8 Type D2 (40mm Graded Stone Aggregate), 100 mm thick, as in Sub-base of floor, paving etc complete all as specified and as directed.

M&L for Cement Concrete 1:3:6 Type C2 (40mm Graded Stone Aggregate), 75 mm thick, as in base of floor, paving etc complete all as specified and as directed.

M&L for Cement Concrete 1:2:4 Type B1 (20mm Graded Stone Aggregate), 100 mm thick, as in path, hard standing in alternate panels/bays, finishing concrete surfaces even and smooth without using extra cement complete all as specified and directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) as in Coping, Bed Plates, Holdfast, Bed Block etc including necessary Formwork and weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for sand filling under floors or in hardstanding etc, spread in required thickness incl consolidation complete all as specified and directed.

Supply and laying Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement & pigment, incl taking out existing old paver blocks and removing from site complete all as specified and directed. (NOTE: Sand cushioning shall be measured and paid separately)

M/s Satguru Traders

shiv shanker enterprises

STAR CONSTRUCTIONS

YESH BUILDERS

M/s Har Nandi Construction Company

VIVEK CONSTRUCTION CO