Loading…
Loading…
Tender Value
₹4.5 Cr
EMD Value
₹3.7 L
Closing Date
16 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
081530MDCH
21 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of 'V/N' or 'V'; whichever is less, where 'V'= Advertised value of the tender in crores of Rupees and 'N'= Number of years prescribed for completion of work for which bids have been invited.
The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. In this case in Annexure-VIB, as mentioned below in clause 1.2, certification from CA is required mentioning that the balance sheet of last Financial Year is yet to be prepared/audited.
The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The Balance Sheet and all other financial documents attested/ certified by CAs to substantiate fulfilment of Financial Eligibility Criteria should be with UDIN, failing which the offer is likely to be rejected without any further reference.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07(seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of similar nature of work :- "Execution of any turnkey work of Construction of "Modular Pacemaker OT" or "Modular Operation Theatre" in any hospital of Central Govt/ State Govt/public Sector under taking / Autonomous Organization under Central Govt/ CGHS Empanelled Private Hospital/Medical council of India recognized medical college hospitals/ NABH accredited private hospitals"
In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, 1.1.1 bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
Explanation for Eligibility criteria: 1. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender. 2. In case a work is started prior to 07 (seven) years, ending last day of month previous to the one in which tender is invited, but completed in last 07 (seven) years, ending last day of month previous to the one in which tender is invited, the completed work shall be considered for fulfillment of credentials. 3. If a work is physically completed and completion certificate to this extent is issued by the concerned organization but final bill is pending, such work shall be considered for fulfillment of credentials 4. In case of completed work, the value of final bill (gross amount) including the PVC amount (if paid) shall be considered as the completion cost of work. In case final bill is pending, only the total gross amount already paid including the PVC amount (if paid) shall be considered as the completion cost of work. In case of substantially completed work, the total gross amount already paid including the PVC amount (if paid), as mentioned in the certificate, shall be considered as the cost of substantially completed work. 5. If a bidder has successfully completed a work as subcontractor and the work experience certificate has been issued for such work to the subcontractor by a Govt. Organization or public listed company as defined in Note for Item 10.1 Para 10 of the Tender Form (Second Sheet), the same shall be considered for the purpose of fulfillment of credentials. 6. In case a work is considered similar in nature for fulfillment of technical credentials, the overall cost including the PVC amount (if paid) of that completed work or substantially completed work, shall be considered and no separate evaluation for each component of that work shall be made to decide eligibility. 7. In case of newly formed partnership firm, the credentials of individual partners from previous propriety firm(s) or dissolved previous partnership firm(s) or split previous partnership firm(s), shall be considered only to the extent of their share in previous entity on the date of dissolution / split and their share in newly formed partnership firm. For example, a partner A had 30% share in previous entity and his share in present partnership firm is 20%. In the present tender under consideration, the credentials of partner A will be considered to the extent of 0.3*0.2*value of the work done in the previous entity. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc.
8. In case of existing partnership firm, if any one or more partners quit the partnership firm, the credentials of remaining partnership firm shall be re-worked out i.e., the quitting partner(s) shall take away his credentials to the extent of his share on the date of quitting the partnership firm (e.g. in a partnership firm of partners A, B & C having share 30%, 30% & 40% respectively and credentials of Rs 10 crore; in case partner C quits the firm, the credentials of this partnership firm shall remain as Rs 6 crore). For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc. 9. In case of existing partnership firm if any new partner(s) joins the firm without any modification in the name and PAN/TAN no. of the firm, the credentials of partnership firm shall get enhanced to the extent of credentials of newly added partner(s) on the same principles as mentioned in item 6 above. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deeds, dissolution/splitting deeds and proof of surrender of PAN No.(s) in case of dissolution of partnership firm etc. 10. Any partner in a partnership firm cannot use or claim his credentials in any other firm without leaving the 1.3.1 partnership firm i.e., In a partnership firm of A&B partners, A or B partner cannot use credentials of partnership firm of A&B partners in any other partnership firm or propriety firm without leaving partnership firm of A&B partners. 11. In case a partner in a partnership firm is replaced due to succession as per succession law, the proportion of credentials of the previous partner will be passed on to the successor. 12. If the percentage share among partners of a partnership firm is changed, but the partners remain the same, the credentials of the firm before such modification in the share will continue to be considered for the firm as it is without any change in their value. Further, in case a partner of partnership firm retires without taking away any credentials from the firm, the credentials of partnership firm shall remain the same as it is without any change in their value. 13. In a partnership firm "AB" of A&B partners, in case A also works as propriety firm "P" or partner in some other partnership firm "AX", credentials of A in propriety firm "P" or in other partnership firm "AX" earned after the date of becoming a partner of the firm AB shall not be added in partnership firm AB. 14. In case a tenderer is LLP, the credentials of tenderer shall be worked out on above lines similar to a partnership firm. 15. In case company A is merged with company B, then company B would get the credentials of company A also.]
59 conditions · 3 needing a document upload
Compliance with the GST Act, 2017 - Change in para (a) of clause 6, part I of Indian Railway Standard General Conditions of Contract, April'2022.
Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer.
Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017(CGST)/ Integrated Goods and Services Tax Act, 2017(IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt.& as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates.
The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority
In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority
When work is tendered for by a firm or company, the tender shall be signed by the individual legally authorized to enter into commitments on their behalf.
The Railway will not be bound by any power of attorney granted by the tenderer or by changes in the composition of the firm made subsequent to the execution of the contract. It may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor
All the bidders / tenderers should ensure that they are GST compliant and their quoted rates are as per GST law.
Tender value is inclusive of GST. Agencies must quote their rates including GST.
However, inter se ranking will be done on the quoted value including GST applicable on the date of opening
In case of increase or decrease in GST rate, same will be either paid by railway or recovered from the agency as the case may be.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions
Tenderers are required to upload copy of Permanent Account Number, GST registration & Mandate Form
Contractor shall be liable to pay/refund the amount collected as GST to the Indian Railways along with interest and penalties, if any imposed by the authorities, in case GST input tax credit of Indian Railways is denied/rejected by the tax authortties due to reasons mentioned below but not limited to: Wrong/incorrect invoices issued by Contractor; No-filing of GST returns; Nonpayment of GST collected from Indian Railways to the authorities; Any other non-compliance done by Contractor; General Indemnity: Contractor hereby agrees to indemnify and hold harmless the Indian Railways from and against any and all losses, including loss on account of Input Tax Credit and all losses incurred by the Indian Railways relating to or arising out of or in connection with any actual or threatened claim, legal action, proceedings, prosecution or inquiry by or against the Indian Railways arising out, directly or indirectly, of failure by the contractor to comply with the provisions of GST and related laws, or based upon or arising from any failure by the Contractor. Retention Money: Any payment liable to be paid by Indian Railways to contractor against the goods or services or both supplied by such contractor to Indian Railways shall be kept on hold in case supplier makes any non-compliance of any of the GST law.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are required to quote their Permanent Account Number in the tender document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
OBJECTIVE Designing constructing and commissioning of 'Upgraded Modular Opthalmic Operation Theatre' in the Central Hospital /SER /GRC'. The bidder should take over the site from as is where is basis and execute all REQUIRED in masonry, electrical, plumbing, air-conditioning, fire safety and other works as may be required for complete installation and trouble-free functioning of the 'Upgraded Modular Opthalmic Operation Theatre' in the Central Hospital /SER /GRC', design as a part of the turnkey work of this tender. The bidder should be responsible for the complete works, as described in the specification and schedule of work (as mentioned in Item Breakup- Description of Item in IREPS Portal ).
GENERAL: The bidder should provide all necessary works, install new hardware, software and implement services to complete the works all in accordance with the standard practice and norms.
General Condition of Contract and Standard Specifications (GCC 2022) with latest Correction Slip issued up to date of opening of tender, regarding Security Deposit and Performance Guarantee and other works matters also follow the Latest Correction Slip, Railway Board's Guidelines etc, issued up to date of opening of tender will be applicable.
The bidder should inspect the area of the existing ' Opthalmic Operation Theatre' in the Central Hospital/SER/GRC', before submission of the bids. The bidder should be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered, during the execution of the works are taken into account and that the rates, he enters in the tender forma are adequate and all inclusive to accord with the provisions of the contract for the completion of works to the entire satisfaction of the tender.
Definition of similar nature of work for the above works tender is as :- "Execution of any turnkey work of Construction of "Modular Pacemaker OT" or "Modular Operation Theatre" in any hospital of Central Govt/ State Govt/public Sector under taking / Autonomous Organization under Central Govt/ CGHS Empanelled Private Hospital/Medical council of India recognized medical college hospitals/ NABH accredited private hospitals"
The system provided should include all equipment and features necessary for a complete installation.
All equipment and software should be of the current production at the time of delivery to the hospital.
All software should be validated by prior clinical use in hospital applications and should be of the latest versions and upgradeable at the time of installation.
Prior to any construction or erection on site, the bidder should submit complete details of the works to be executed, this should include but not limited to material submittals (catalogues, samples, diagrams), Shop drawing submittals (modifications of existing works, detailed drawings, calculation notes etc.), testing results and adjustments.
The entire project should be done on a turnkey basis including all electrical and Civil service installations. The bidder should have a service facility in Kolkata .
The bidder should issue relevant installation drawings and specification documents to the Authority as required for his comments and approval prior to works commencing on site.
All materials and components shall be approved by the User or his appointed representative described within this specification. Unless otherwise specified materials should comply with the current international safety standards and Codes of Practice.
Certificate of completion of work: The maintenance period shall be 2 (Two) years from the date of completion of works. An engineer of the contractor to be posted on the site for two years after completion to attend to any problems.
All works are to be done as per programme fixed by the concerned officer in charge of medical department or his authorized representative and as per their direction only.
During the course of work steel are to be got tested by the contractor at their own cost to ascertain their conformity to specification as and when required by the concerned authority .
The steel supplied by the contractors must conform to specification IS 2062 or relevant latest BIS Codes.
The steel that will be supplied by the contractor should conform to 1.S. 226/1.S. 1977 for mild steel and IS, 1481 for rivets followed with latest corrections if any. All steel section, Rivets, Paint, etc. are to be got tested as per relevant BIS codes at the contractors expense by the Chief Chemist and Metallurgist, S.E.Railway, Kharagpur or at National Test House, Alipore, Kolkata or at IIT, Kharagpur as found convenient by the Railway. If the test results does not confirm to the relevant IS specifications, the whole lot/ lots of materials shall be rejected and got removed from the site by the contractor at the contractor's cost. No payment will be made for rejected works. Manufactures test certificate is to be submitted by the contractor along with necessary purchase vouchers etc.
All fabrication and erection shall be done in accordance with IS.800 : 62 as per approved drawings followed with latest corrections if any. The fabrication of shed structure shall be by riveting and or welding excepting gantry girders, which shall be by riveting only. Riveting or welding shall not be started until such time the concerned officer has personally satisfied himself that the alignment of the structure is correct.
All painting works are to be done as per following special conditions: a. Paints manufactured by the Firms- i. Ms Asian Paints, ii. Ms Johnson Nicholson, iii. Ms Goodlac Nerolac, iv. Ms Shalimar Paints, v. Ms Berger Paints formerly Ms British Paints, vi. Garware Paints only shall be used. Paints for the primer and finishing coats may be preferably procured from the same manufacturer for achieving better result. Manufactuers test certificate is to be submitted by the contractor along with necessary! purchase vouchers etc. b. The empty drums of paints used in this work will be the contractors property and will remain kept in Supervisors custody till the completion of work and after completion of each work the empty drums will be returned to the contractor.
No compensation towards any accident what so ever will be paid by the Railway
The Railway will not be responsible for compensation towards contractor's idle labour in site cannot be given to the contractor as per programme due to unforeseen reasons.
Contractor shall not start any work without the presence of the authorized representative. In case the contractor's representative starts any work in absence of any authorized Railway representative, it shall be treated as unauthorized and illegal tampering with the premises and shall be liable for action.
In case contractor fails to return the unused and excess materials issued to them and released materials, the cost of such materials will be deducted from the contractors dues at the rate of 2 x Purchase cost with 5 percent freight. Purchase cost for released materials should be taken as prevailing market rate.
The contractor should mobilize to do night working for which they will be required to have their own sufficient lighting arrangement. No extra payment will be admissible on this account.
The Contractor with the help of his Engineer or Diploma holder, as the case be , shall make necessary Drawings, sketches, plotting, page markings etc. as desired by the Engineer-in- charge. No extra cost shall be claimed on this account.
This works tender will be executed as per IR-GCC-2022 or as per latest correction slip or update of IR-GCC-2022.
The work will be executed under supervision of doctor -in-charge or authorized representative at site.
The agency should depute a trained and certified supervisor duly certified by MD/SER/GRC.
The Contractor should be make available all the necessary tools, plants and equipment for execution of the above work at site during execution of work.
Wherever any reference to Code, Specifications etc., is made in this tender document, it shall be taken as a reference to the latest version thereof including all amendments and corrections etc. However, where these specifications do not cover full details relevant Indian Standard Specification shall be followed. Decision of the PCMD/SER shall be final in this regard.
Right of Railway to Deal with Tenders: The Railway reserves the right of not to invite tenders for any of Railway work or works or to invite open or limited tenders and when tenders are called to accept a tender in whole or in part or reject any tender or all tenders without assigning reasons for any such action. In case if tender is accepted in part by Railway administration, Letter of Acceptance shall be issued as counter offer to the Tenderer, which shall be subject to acceptance by the Tenderer.
Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer.
Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017(CGST)/ Integrated Goods and Services Tax Act, 2017(IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt.& as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates.
The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority.
In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority.
When work is tendered for by a firm or company, the tender shall be signed by the individual legally authorized to enter into commitments on their behalf.
The Railway will not be bound by any power of attorney granted by the tenderer or by changes in the composition of the firm made subsequent to the execution of the contract. It may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Upgraded Modular Opthalamic Operation Theatre at S.E Railway / Central Hospital / Garden Reach, Kolkata-700043.
MD-CH-WP-Eye-OT-718
MD-CH-WP-Eye-OT-718
Open
Works - General
4 Months
Unknown (Unspecified Location)
₹0
₹3.7 L
16 Mar 2026
19 Feb 2026
2 Mar 2026
42 items across 3 schedules · ₹4,48,90,324.64 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | The Pre-fabricated Modular Construction is designed and constructed for exact size, easy field installation and future disassembly, enlargement or relocation. The Pre-Fabricated OT will be a freestanding structure, constructed from composite, free standing insulated steel wall panels. (0.8mm, Stainless EGP Steel Sheet,of 50mm PUF) Jindal/Tata/Everest | Sqm | 135.00 | 10,915 | 14,73,525 |
| 2 | Glass Panel one side in the OTS- Make- Mico/Asahi | Set | 2.00 | 1,82,900 | 3,65,800 |
| 3 | Filling of all Joint sand Cavities with Metallic Epoxy filler and Sanded flush to provide a joint less finish and then sprayed with a water based liquid plastic aseptic and self- sterilizing wall coating to provide totally sealed and seamless surface which is non- porous, easy to clean, stain-resistant, durable and does not support growth of mold, mildew or bacteria. Anti-Bacterial film - Silver based. Make-Sikka/Jotun/LG | Sqm | 135.00 | 3,776 | 5,09,760 |
| 4 | Providing & Fixing of Plan air Ceiling constructed out of 1.6 mm thick Aluminum Steel sheet, of size 1800 x 2400 / 1800 x 1800 mm, with aluminum extrusion frame / neoprene gasket to seal the gap between the ceiling & plan air. Having HEPA filters of Class H14 each. The hepa filters having dust spot efficiency of 99.99% 0.3 micron. Air & Light diffuser made out of two layer of mono filament precision woven polyester for the plan air ceiling to give a "LAMINAR FLOW" of filtered air. It also provides a diffused shadow less lighting system with a control on the intensity of luminance Make:Hindalco/Balco/NALCO | Numbers | 2.00 | 2,65,500 | 5,31,000 |
| 5 | Providing & Fixing of Anti-static Conductive Flooring, 2.0mm thick (2*20M roll) resistance to mechanical stress and dynamic load sand having glass fiber reinforcement for dimensional stability. Conforming to EN685/649 standard- Jeo/Tarkit/Gerflor | Sqm | 58.00 | 4,625.6 | 2,68,284.8 |
| 6 | Providing & Fixing of Anti-static Flooring, 2.0mm thick (2*20M roll |resistance to mechanical stress and dynamic load sand having glass fiber reinforcement for dimensional stability. Conforming to EN 685/649 standard. Jeo/Tarkit/Gerflor | Sqm | 62.00 | 4,625.6 | 2,86,787.2 |
| 7 | Modular Suspended ceiling system inclusive of grids, wall angles, suspension rods & allied accessories and 600x600x15mm thick for sink area, change room, store and waiting area. Armstrong/Sent Gobain/LG | Sqm | 60.00 | 4,543 | 2,72,580 |
| 8 | In OT-I:- Automatic type Sliding, hermetically sealed type of door of size 1500 x 2100 mm having PUF / high density particle board cores, high pressure laminated faced on both sides, viewing window 300 x 300 mm and for smooth effortless sliding, the door runs on nylon wheels within an aluminum extrusion track. There should be 04 numbers of Radar and 4 numbers of foot switch to operate the sliding door on either direction. In OT-II:- Automatic type Sliding, hermetically sealed type of door of size 1500 x 2100 mm having PUF / high density particle board cores, high pressure laminated faced on both sides, viewing window 300 x 300 mm and for smooth effortless sliding, the door runs on nylon wheels within an aluminum extrusion track. There should be 02 nos. of Radar & 02 nos of foot switch to operate the sliding door Dormed/Metaflex/Hermed | Numbers | 2.00 | 4,30,700 | 8,61,400 |
| 9 | Collapsible Partiation Wall for OT with all necessary fittings *Panel: Thickness: Ranges from 65mm to 125mm.*Panel Height: To range from standard heights 2.4-3 meters up to 18 meters, depending on the site. *Panel Width: Typically up to 600mm. *Material of the collapsible partition wall : Anti bacterial powder Coated Material (Metal, EGP) *Track System: Should be top-hung and floor- supported, with single / twin-point suspension. Jindal/Tata/Everest | Set | 1.00 | 4,36,600 | 4,36,600 |
| 10 | Manual type Swing door(LEAD), DOUBLE LEAF of size 1500x2100mm having PUF cores, Stainless Steel grain finish faced on both sides, viewing window 300 x 300 mm. Dormed/Metaflex/Hermed | Numbers | 2.00 | 1,82,900 | 3,65,800 |
| 11 | Manual type Swing door(LEAD), SINGLE LEAF of size 900x 2100 mm having PUF cores, Stainless Steel grain finish faced on both sides, viewing window 300 x 300 mm Dormed/Metaflex/Hermed | Numbers | 3.00 | 1,71,100 | 5,13,300 |
| 12 | Civil Work including Dismantling- (As per drawing) Dismantling materials handed over to Engineering department of S.E. Railway (Civil dept.) | Set | 1.00 | 4,01,200 | 4,01,200 |
| Schedule total | ₹62,86,037 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecificationPhacomachine.pdf
ATTACHMENT
FinalLAYOUT.pdf
ATTACHMENT
GCC2022.pdf
ATTACHMENT
2018_CE-I_CT_9Date04_06_2018_1.pdf
ATTACHMENT
Annexure-II.pdf
ATTACHMENT
AnnexureVIA.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
BidCapacity.pdf
ATTACHMENT
CertificateofInformationregardingEmployment_1.pdf Certificate of information
ATTACHMENT
MANDATEFORM.pdf
ATTACHMENT
MinimumwagesPFESIShramikKalyanPortal.pdf
ATTACHMENT
AdvanceCorrectionSlipNo1to10.pdf
ATTACHMENT
AnnexI_1.pdf
ATTACHMENT
CertificateofInformationregardingEmployment_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .