PROVN OF DEFICIENT STREET LIGHTS, POLES WITH FITTINGS AND CONNECTED ITEMS AT 4 GARH RIF AND PROVN OF PATIENT WATTING HALL AND ALLIED WKS NEAR BLDG NO 95 OF CH (CC) UNDER GE E/M LUCKNOW

Amount

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.ecx 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil all as specified.

Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed.

Removing excavated material n. exc. 50 m and depositing where directed at a level n.exc 1.5m complete all as directed.

Material and labour for dry river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading, levelling & punning complete as specified and directed . Note :- Punned thickness (18 cm) shall only be considered for payment.

M&L laying well burnt old size bricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified & directed by Engr-in-Charge.

Deployment of tools & manpower for Boring /drilling (Horizontly) manually / mechanically under existing road max 10 M in width) suitable for passing pipe of any descreption of dia 40 to 100 mm complete all as specified and directed by Engineer in Charge

M&L for 40 mm bore mild steel galvanised water tubing, light grade with all fittings and fixed to walls or laid on floors / fixed to poles / or passing under road crossing, for protection of UG cable complete all as specified and directed by Engr-in-Charge.

M&L for demolition /cutting of road / path / hardstading / concrete in floor, etc for laying of cable complete all as directed at site by Engr-in-charge.

Material and labour for plain cement concrete 1:2:4, type B-2, using 40 mm graded stone aggregates for filling of cutting of roads / path / hardstanding etc complete all as specified and as directed by Engineer-in-Charge.

Material & Laying, jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 10 sqmm cross sectional area, 2 core, complete all as specified laid in trenches / laid under floor or fixed naked with walls / on poles/ in ducts / in GI pipes etc. with and including MS Clamps, nuts, bolts, washers complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

All as per item No 10 above but LT under ground cable of size 16 Sqmm 4 core

All as per item No 10 above but LT under ground cable of size 25 Sqmm 4 core

M&L for Earthing complete with galvanized steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to earthing test point, main switch board, testing on completion including PCC cover and frame, PCC (1:3:6) type C-2 as in earthing pit, MS funnel with wire mesh GI pipe 20 mm dia light grade for watering and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 5 SSR Part-I. PCC chamber shall be constructed at least one metre away from the earth pit and GI pipe fittings for watering shall be provided up to chamber and cost of the same is deemed to be included in the rate of earthing. .

Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department

Supply drawing, connecting and testing 3 core, 1.5 Sqmm PVC insulated and PVC round sheathed` copper conductor (flexible ) industurial cable, 1100 Volts conforming to IS 694 in steel tubular poles and octagonal cross sectional pole from Junction box to street light fitting including providing suitable copper lugs all as specified and directed by Engr-in-charge.

Supply and errection of 07 mtr continuously tapered hot dip galvanised Octagonal cross sectional pole with single dipping method having bottom 130 mm A/F and top 70 mm A/F 3 mm thick confirming to ASTM A 572 Gr with yield 450 mpa cut and folded to form an octagonal section and welded in accordance with AWS for wind loading as per IS 875 part 3 1987.Poles shall be provided with base plate of size 220 mm x 220 mm x 12 mm thick, which shall be free from any lamination or incursion with no cutting or welding on the pole after hot dip galvanising with single arm 1000 mm long bracket tilted at 10 to 15 degree to horizontal level vertices suitable for mounting on the octagonal pole, of company recommendation and one no TPN connector 3 phase 4 wire 100 Amps , and one number MCB SP 6 Amps. A triangular flat MS plat of 6mm thick duly coated with GI shall be welded between cap of the octagonal pole and bracket. Welding work shall be done 250mm on bracket and 150 mm on pole's cap including all RCC work type (1:2:4) type B-1 including 04 Nos foundation nut bolt and plate as per pole manufacturer's drawing and earth work all as per requirement complete all as specified and directed.

Note:- Cost of construction of RCC foundation including construction material, necessary earth work and excavaton as per manufacturer design for above pole complete all as required at site and as directed by Engr-in-charge are deemed to be included in the quoted rate.

Supplying, transporting and erecting of Steel tubular swaged poles type 410 SP-31 ( 9.0 metres long) complete with cast iron base plate, finial, taper plug, bolts, nuts and screws as specified, including necessary excavation and earth work, PCC 1:4:8 type D2 in foundations below pole, PCC 1:3:6 type C2 around poles and PCC 1:3:6 type C1 as in plinth block, disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, the exposed surface of steel tubular poles shall be painted with two coat of aluminum paint over a coat of red oxide, embaded portion of the pole shall be painted with one coat of bituminous paint. 05 Nos black and Yellow alternate strip with two coat of synthetic enamel paint shall be painted up to the the height of 1.5 M from copping of the pole including numbering on pole in black colour synthetic enamel paint complete all as specified and directed.

Supply & fix GI brackets made of 40 mm nominal bore GI pipe medium grade of required length not less than 1.5 M long, mounting brackets made out of Mild steel FI 40x6 mm of required shape ( two Nos) duly fitted with Mild steel nuts, bolts and washers and painting with two coats of synthetic enamelled paint over one coat of red oxide primer and fixed to pole / walls etc complete all as specified & directed by Engr-in-Charge.

S&F weather proof pole mounting PVC junction box, base and door of junction box made out of SMC having outside dimension 333 x 233 x 120 mm, inside dimention 300 x 200 x 105 mm, single door front openable provided with hinged cover and locking arrangements with 4 Nos aluminium bas bar 63 Amps, mounted on porcelin insulator including M&L for MCB SP 6 Amp -1No, fixed on box in Din rail complete with electrical connection fixed to pole with suitable size FI clamp nut bolts and washer including embossing / painting of danger notice of size not less than 10 cm x 7.5 cm with letters, figures and conventional skull and bones in signal red colour on front face of junction box body Complete all as directed by Engr-in-Charge.

Supply and fix 70 Watt pressure Die cast aluminium housing street light with system lumen of 9800 lm & system efficacy of 140 Im / Watt, IP66, IK10, Single piece die cast including spigot, dia 48-76mm, LED Lifetime (L70B50) 75K Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO on/off based on Dusk / Dawn timings, preset time setting with monthly variation(Jan to Dec.), inbuilt Real time clock for switching, includes dimming profile for energy savings, drift not exceeding max 2 mins per year, clock retention upto five years, auto switching off secondary power for module, dimmable driver based on PWM control, dim to off with High / Low Voltage cut off with 440 V protection for 8 hrs for complete luminaire including driver and Astro module, EMI / EMC complaint as per EN55015,IEC61547.surge protection as per IEC 61000-4-5,driver meeting IEC61347, complete luminaire meeting IEC60598-2-3-2002, Luminaire manufacture shall provide LM79 report from NABL / UL accredited lab & LM80 report issued by LED manufacturer. Both the fixture and Driver should be of same make & must have separate BIS approval complete.

Material & Labour for concealed point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn through and including PVC conduit not less than 20 mm dia, including all accessories like bend, tees, junction boxes etc, including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable of green colour as a earth wire connected to common earth dolly, including modular type pressed steel sunken type terminal box up to 8 module suitable for modular switch complete. Note:- Modular type cover plate & frame will be measured & paid separately

All as per Item No 20 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per Item No 20 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item No 20 above but wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as earth wire for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.

Supply and fix modular type white switch, 250 volts, single pole one-way 6 Amps in 1 module including connecting complete all as specified & directed

Supply and fix modular type white socket 3 pin cum 2 pin, 6 Amps 250 volts in 2 modules including connecting complete all as specified & directed

Supply and fix modular type white switch, 16 Amps 250 volts in 2 modules including connecting complete all as specified & directed

Supply and fix modular type white socket 3 pin cum 2 pin, 16 / 6 Amps 250 volts in 2 modules including connecting complete all as specified & directed

M&L for Ceiling rose 3 plates modular type type 6 Amps,250 volts AC including connecting complete all as specified & directed

S&F Modular white cover plate with frame 3 module

S&F Modular white cover plate with frame 6 module

S&F Modular white cover plate with frame 8 module

S&F modular enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps including connecting complete all as specified & directed

S&F distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, fixed flush to wall complete all as specified and directed.

S&F distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 4 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, fixed flush to wall complete all as specified and directed.

S&F MCB single pole 6 to 32 Amp 240 volts 10 KA breaking capacity including connecting complete all as specified & directed

S&F MCB single pole & neutral 40 Amp 240 volts 10 KA breaking capacity including connecting complete all as specified & directed

Supply, installation, commissioning and testing, Hot and Cool, inverter type, high wall split Air Conditioner of capacity 1.5 TR with digital invertor rotary compressor, filter, auto clean function, indoor sound level 32 db., front panel display, wireless LCD remote, precoated aluminium fins, 477 cfm air circulation, auto fan speed, 3 star rated, electric driven suitable for working on 230 volts, single phase 50 Hz supply with cardless remote complete including cutting of wall, providing stand for out door unit and making good disturbed surface of wall etc complete, all as specified and directed and details as under.

(a) Fixing the indoor unit on wall with grouting nuts, cutting groove/ hole to wall for gas pipe & water drainage pipe. (b) S&F cutting, bent to shape copper refrigerant pipe (up to 6 meter length ) of appropriate size with insulation from outdoor unit to indoor unit by cutting holes to wall including brazing to copper pipe fixing union including making good disturbed surfaces as existing. (c) S&F PVC pipe 20 mm Dia transparent flexible heavy duty for water drainage pipe up to 06 RM length. (d) Insulation of both the copper pipes with insulating material. (e) Charging of correct qty of refrigerant gas after necessary / fixing of both the outdoor/ indoor unit and testing complete. (f) All other connected civil work, like hole cutting & other misc. work reqd for split AC for proper functioning as directed by EIC. (g) Outdoor unit Shall be fixed wall mounted stand and quoted rates shall be deem to include cost of same (h) Plug to provided by contractor with wire.

Supply and Fix wall luminaires integrated LED Batten 20 W, 6000 K,100 lumens / watt, 230V with extruded Aluminium housing 4 feet long with frosted PMMA / PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.

Supply and fix Recess type 36 watt LED llight fittings of size 600 m x 600 mm, made of CRCA powder quoted finish with Fully Covered by PMMA Acrylic Lumio Diffuser, LED Used shall be SMD type and fixture including cutting and making false ceiling of any pattern / mtrl proper fixing of light in falce ceiling, electrical connection complete all as specified and directed.

S&F LED Building security light 35 Watt with high power LED source (>110 lumen / watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete.

Supply and fix heavy duty metal body exhaust fan single phase 230 / 240 volt of size 300 mm sweep including making holes of suitable size, grouting of nuts and bolt etc and making good to match the existing surface including louvers and making connetion with twisted copper flexible wire 23 / 0.076mm, complete all as specified and directed.

Supply and fix wall mounted fan 450 mm sweep (white) string controlled oscillating type with all accessories as per manufacturer norms fixed in position and connecting, complete as specified and directed by EIC

S&F call bell Ding Dong type AC 230 volts single pole including connecting complete all as specified & directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft soil.

M&L PCC 1:4:8 Type D 2 using 40mm graded stone aggregate as in foundation, filling, mass concrete complete all as specified and directed.

M&L for Brick work with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, using bricks of size 230 mm x 110 mm x 75 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge.

M&L for RCC 1:2:4 type B-1 using, using 20 mm graded stone aggregate as in foundation, footings, plinth Beam and similar RCC works all as specified and directed.

M&L for RCC 1:2:4 type B-1 using, using 20 mm graded stone aggregate as in columns, piers, pillars, posts and struts complete all as specified and directed..

M&L for RCC 1:2:4 type B-1 using, using 20 mm graded stone aggregate as in lintel, lintel band, cill, beam & similar works complete all as specified and directed..

M&L for RCC 1:2:4 type B-1 using, using 20 mm graded stone aggregate as in slab complete all as specified and directed.

Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams and similar works for rough finished surface complete all as directed.

Use & waste form work to sides of pillars, posts and columns for rough finished surface of concrete complete all as directed.

Use & waste Form work to sides and soffits of floor or roof beams, lintiles cantilever etc for rough finished surface complete all as directed.

Use & waste Form work to soffits of suspended slabs such as roof slabs floor slab landing and similar work not exc 200 mm thick, for rough finished surface complete all as directed.

M&L for steel reinforcement of TMT bars (Fe-500 Grade) 10 mm dia and over cut to length and bent to shape required including cranking bending spirally, hooking end and binding with mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips all as specified and directed.

M&L for steel reinforcement of TMT bars (Fe-500 Grade) 8 mm dia and over as in stirrups cut to length and bent to shape required including cranking bending spirally for hOoping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for Rolled mild steel in roof trusses (framed), trussed, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-Charge.

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing / cladding to wall, fixed with self tapping / drilling screws as specified

M&L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete wall surfaces, finishing the surface even and smooth without using extra cement (Note: Water proofing compound shall be measured and paid seprately) complete all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

Supply only water proofing compound of approved quality complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer over and including 2 mm to 3 mm thick cement base wall care putty complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered surface of walls and applying two coats exterior emulsion weather coat paint of make Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac) over one coat primer with 2 mm thick cement base wall care putty complete all as specified and directed.

M&L for Antitermite treatment for soil under plinth protection using at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for Antitermite treatment on soil under plinth protection at the rate of 5 litre of emulsion per square of surface area complete all as specified and directed.

M&L Antitermite treatment treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per Sqm of the perimeter wall

M&L for Hardcore of gauge n exc. 63 mm, of broken stone boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection / path and the like all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg, as in sub base of florring, finished even and fair all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone agg, as in florring, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for premium / 1st quality non skid ceramic coloured tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for premium / 1st quality colour vitrified ceramic light coloured tiles 8-10 mm thick (square) polished, area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the tiles laid over and including 15 mm thick scree bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for for coloured glazed ceramic tiles premium / 1st Quality in vertical surfaces of size 300 x 450 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, laid over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-Charge.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15 mm thick scree bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

S&F 'E' board of size 600 x 600 x 4 mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid with and including hot dipped galvanised iron imposed grid with 24 mm wide T-section exposed flanges which shall be poweder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24 x 32 x 300 mm and secured at 1200 mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be grater than 450mm from adjacent wall, Flush fitting of 1200 mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200 x 600 mm modules cross tee longer than 600 mm to be supported independtly. 600 x 600mm dodules to be formed by fitting 600 mm long cross tee centrally between the 1200 mm cross tee. Tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture insturction.

M&L for PVC Wall panelling / Lining consisting of 5 mm thick Plain / wood colour PVC sheet as approved inclusive of solvent cement and fixing at site on PVC frame including complete fixing arrangments on wall complete all as per manufactures specifications.

S&F anodised aluminium alloy sections sliding windows shutters with frames comprising series-C (20mm), 3 track slinding shutters duly fitterd with neoprene beading, glazing clips, locking device, heat absorbing glass 4.8 mm nominal thickness in 2 shutters and 0.46 mm dia SS wiremess in one shutter complete all as specified and directed.

S&F aluminium section (Confirming to IS) door shutters with frame of size 100 mm x 44.45 mm wide fabricted with 2 mm thick section, double leaf shutter with 44.45 mm wide fabricted with 2 mm thick section having vertical and top rail 83.50 mm, bottom rail and middle rail 115 mm and including necessary jointing cleats, screws, neosprene rubber beading, PVC packing, tinted glass panes 4.8mm nominal thickness complete all as specified and directed.

S&F aluminium partition fabricated with aluminium powder coated (Minimum thickness of powder coating 50 micron) section for side & top of size 101 mm x 44 mm x 2.5mm for middle rail (horizontal / vertical ) of size 101 mm x 44 mm x 2.5 mm, partly glazed with 5 mm thick frosted glass and partly paneled with 3 mm thick aluminium camposit pannel including galzing clip, rubber bead, fixed in position as per standered practice including all as directed and specified.

S&F door comprising frame fabricted with aluminium tube with wall thickness 2 mm, shutter frame with C type aluminium section 25 mm sizw of 2 mmm wall thickness, door panel of 3 mm thick aluminium composite panel and neoprene rubber beading including handles, locks and necessary fittings as specified and directed by Engr-in-charge.

S&F for PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour pvc sheet reinforced with MS square tube, suppling & fixing in opening as per specn & drg.

S&F for factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified.

S&F 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed by Engineer-in-Charge

S&F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge

S&F 100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge

S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) in soft / lose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by Engineer -in- Charge

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde-E-165

Supply and fix 500 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.

M&L for 20 mm bore mild steel galvanised water tubing, medium grade, with all fittings and fixture, fixed to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F 20 mm bore dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, suitable for 20 mm bore pipe, screwed for iron pipe and fixed. (Minimum weight 20 mm -210gms) complete all as specified.

M&L for 15 mm bore mild steel galvanised water tubing, medium grade, with all fittings and fixture, fixed to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm dia stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (Concealed type), screwed down both ends for high pressure, as per ISI suitable for iron pipe all as directed.

S&F 15 mm dia long body bib taps, cast copper alloy chromium plated fancy type with capston head screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. Make- Jaquar cat part OPP - 15037PM or equivalent of make mention in Appx A

S&F CP Angle stop cock ( one way) long thread with wall flange , fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified.

S&F 15 mm bore 2-way bib cock with flange etc all as specified and directed. Make- Jaquar cat part OPP-15041 PM or equivalent of make mention in Appx A

S&F vitreous china table top Wash Hand Basin of size 500 x 425 x 130 mm with bottle trap complete all as per manufacturer's instruction. Make-:-Jaquar cat Part No FLS-WHT-5935 N or equivalent of make mention in Appx A

S&F 15 mm size pillar taps, cast copper alloy, chromium plated, fancy type, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F PVC connection 15 mm size with PTMT nut, length 450 mm complete.

S&F 32 mm bore PVC flexible waste pipe with coupling fixed to WHB / urinals as waste pipe, length not less than 600mm complete all as specified.

S&F 75 mm dia Cast iron floor trap, with 75 mm dia stainless steel grating, including jointing to waste pipe fixed in plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate complete.

S&F vitreous China wash down water closet pan (padestal pattern Water Closet ) , ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., complete incl

Supply and fix10 Litre capacity PVC symphonic action type flushing cistern (ISI Marked) low level, with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete.

S&F 100 mm dia stainless steel grating fixed in position with white cement complete all as specified.

S&F health faucet (ABS Body) with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed.

S&F brass CP tubular towel rail of superior quality 20mm dia 60cm long between flanges fancy type all as specified. Make Jaquar cat part No ACN-35711PS or equivalent

S&F chromoium plated box type toilet paper holder fancy all as specified. Make:- Jaquar cat part No AKP-35753PS or equivalent of make mention in Appx A

S&F CP shop dish fancy type etc fixed on wall surfaces etc all as specified and directed.

S&F glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete, all as specified and directed. Make: Jaquar cat part No ACN -1173 or equivalent of make mention in Appx A

Supply & fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. Make: Jaquar cat part No ACN-1171N or equivalent of make mention in Appx A

S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc curtain rods 22 - 25 mm dia including Knobs and brackets complete all as specified and directed.

M&L for 150 mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as specified and directed.

M&L for PCC 1:3:6, type C2 using 40 mm graded stone aggregate as in bed to drain pipes of 150 mm bore dia including packing uner and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC 1:3:6, type C2, using 40 mm graded stone aggregate, as in foundation, filling and mass concrete complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F 110mm PVC (SWR), Junction single, (Single T) equal or unequal), fixed with solvent cement, with oval access door, complete all as specified and directed.

S&F 110mm PVC(SWR) bends any radius complete all as specified and directed.

S&F 75mm PVC(SWR) bends any radius complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm PVC(SWR) vent cowl complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm bore PVC (SWR) 'P' trap, including fixed with solvent cement complete all as specified and directed.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 110 mm bore drain pipe.

M/S S.B. Singh and Sons (BID ID -3453186)

ARORA BROTHERS (BID ID -3453231)

Sanjay Traders (BID ID -3453126)

M K Engineers and Contractors (BID ID -3453171)

M/s Vatsh Raj and co (BID ID -3452767)

M/S ANIL ARORA (BID ID -3453584)

M/s Vimal Traders (BID ID -3452928)

M/S CLASSIC ENTERPRISES (BID ID -3453382)

Industrial Traders (BID ID -3453543)