MC EW D ROB TO UP-GRADATION AND MAINTENANCE OF DRAINAGE SYSTEM INCLUDING SEWER AND WASTE WATER PITS SOIL PIPES CSU MANHOLES AND FIXTURES FOR TOILET ETC AT PT DDUIA GREATER NOIDA

ITEMS TO BE EXECUTED

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 15.7.4 In cement mortar

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cementmortar including stacking material within 50 metres lead. 15.23.1 For thickness of tiles 10 mm to 25 mm

Dismantling of electrical fittings and items of all types including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling existing plumbing fixtures including wash basins, WCs, urinals, taps, showers, CP fittings, GI/CI/UPVC pipes, valves, traps, and associated accessories from walls, floors, and ceilings; including cutting, making good the walls/floors, stacking serviceable materials, and disposing of unserviceable materials outside the site premises as directed by the Engineer-in-Charge. Note: Rate to include all labour, tools, and incidental charges.

Removal of collected malwa from monument to outside of Municipal limit by tractor/trolly/ truck etc, manually by labours from Monument/site to main gate lead 250 mtr approx and main gate to dumping ground by machanically lead 25 km approx.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix : 13.4.1 1:4 (1 cement: 4 coarse sand)

CEMENT PLASTER (IN FINE SAND) 12 mm cement plaster of mix, 13.1.1 - 1:6 (1 cement: 4 fine sand)

"CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT- 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 13.8.1 1:3 (1 cement: 3 fine sand)"

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.3 - 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer

EXTERIOR FINISHING Finishing walls with Acrylic Smooth exterior paint of required shade 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and fixing multiwall polycarbonate sheet (three layered), minimum 10 mm thick, UV-protected, of approved make and colour (e.g., blue, bronze, or clear), over pre-installed MS frame (frame paid under separate item), including all fittings, accessories, labour, and T&P complete. (The sheet shall be fixed in required shape and slope using: EPDM rubber gaskets (top and bottom), Powder-coated aluminium profiles and channels (minimum 10×10×1.5 mm, 0.2 kg/m), Self-drilling and self-tapping steel screws (min. 50 mm long, fixed @ 150 mm c/c) Anti-dust tape at ends and breather tape at upper edges,Silicone sealant for waterproofing jointsWork includes: Cutting, bending, and shaping of sheets as per site dimensions, All labour, tools, and tackles required for safe and precise installation

"Providing and fixing 10 mm × 75 mm pin-type anchor fasteners of mild steel grade, including drilling of appropriate diameter holes in concrete/masonry surface, cleaning, insertion, and hammering to secure the anchor, complete with matching hexagonal nuts and plain washers. Rate includes all labour, tools, and incidental materials required for proper fixing as per site conditions and direction of Engineer-in-Charge. "

Drilling and fixing of M16 × 150 mm high-tensile hex bolts (Grade 8.8) with nuts and washers—4 nos. per location, including alignment, tightening, anti-corrosive coating, labour, tools, and all necessary consumables for anchoring fabricated MS components over MS plate.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 All kinds of soil

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.1 Mild steel and Medium Tensile steel bars

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

"Centering and shuttering including strutting, propping etc. and removal of form for 5.9.3 Suspended floors, roofs, landings, balconies and access platform"

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. completeat all levels. 8.2.2 Granite stone slab colour black, Cherry/Ruby red 8.2.2.2 Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge 8.3.2 Granite Work

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

"Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete."

"Providing and fixing 18 mm thick polished granite slabcladding of approved colour and shade on wall surfaces, over a 12 mm thick cement mortar bed in 1:3 mix (1 cement : 3 coarse sand), including application of cement slurry @ 3.3 kg/sqm, edge finishing, and pointing in white cement mixed with matching pigment. The work includes: Supply of granite slabs (machine-cut and mirrorpolished) of uniform thickness (18 mm), free from cracks and defects. Surface preparation and mortar bedding. Application of cement slurry for enhanced adhesion. Fixing granite slabs with proper alignment and joint spacing. Pointing with white cement and pigment to match granite shade. Inclusive of all labour, materials, tools, scaffolding, and curing."

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carri

ed out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineerin- Charge.

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 22.23.1 For vertical surface two coats @ 0.70 kg per sqm per coat

"Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600 mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 26.22.2 With 15 mm thick tegular/butt edged without perforation plain/designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801 and ASTM G - 21"

Cement concrete pavement with 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.

Supplying, installing, testing, and commissioning of branded, ISI-marked pump set (self-priming/submersible type) suitable for pumping out waste water or rain water from the compound, including all accessories, wiring, and fittings complete. ISI-marked pump set (0.5 HP to 3 HP) of approved make (e.g., Kirloskar, Crompton, Texmo). Foot valve, suction/delivery hose, clamps, and adapters. Electrical starter, wiring, earthing, and switchgear. Mounting base, vibration isolation, and commissioning. Labour, tools, and testing for full operational readiness.

Repairing of existing pump set (0.5 HP to 3 HP) for compound drainage, including servicing, replacement of worn-out accessories, wiring, fittings, testing, and commissioning complete.

"Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.(iii) Chlorination of RCC internal surface by liquid chlorine.(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-inCharge."

"Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 17.5.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern"

17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 17.28.2.2 40 mm dia

Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 18.7.6 50 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 18.8.3 25 mm nominal dia Pipes

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 18.51.1 15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :18.49.1 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. 8.10.2 Granite Stone of approved shade

18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

Supplying and laying uPVC Waste Pipe of 100 mm outer diameter, including all necessary fittings such as Tees, elbows, corners, reducers, and couplers. All joints to be sealed using approved solvent cement. The work includes surface dressing, leveling, trenching (if applicable), and covering with suitable material. Complete in all respects with labour, tools, and incidental materials.

Supplying and laying uPVC Waste Pipe of 150 mm outer diameter, including all necessary accessories such as Tees, elbows, corners, reducers, couplers, and end caps. Joints to be chemically sealed using approved solvent cement. Work includes surface dressing, leveling, trenching (if applicable), and covering. Also includes providing and fixing steel clamps/supports at required intervals, complete with all labour, tools, and materials.

Providing and fixing ABS drain pipe of 100 mm dia, including all necessary fittings (elbows, tees, couplers), sealing solvent, supports, and labour charges.

Providing and fixing ABS drain pipe of 150 mm dia, including all necessary fittings (elbows, tees, couplers), sealing solvent, supports, and labour charges.

Provision for electrical articles for providing electricity in house Pvc Pipe

PVC Pipe Bend

Junction Box

Concealed Light Box 100 mm

Anchor Hook for Ceiling Fan in RCC

FLUSH METAL BOXES 12M

FLUSH METAL BOXES 8M

FLUSH METAL BOXES 2M

FLUSH METAL BOXES 4M

Suntech 12 Way SPN Metal White Double Door Distribution Board MCB Box

“PVC Insulated 6 mm Single Core Flexible Copper Wires & Cables polycab /comptaon/hevells"

“PVC Insulated 2.5mm Single Core Flexible Copper Wires & Cables polycab /comptaon/hevells"

"PVC Insulated 1.5mm Single Core Flexible Copper Wires & Cables polycab /comptaon/hevells"

Havells 12 M Cover Plate

“PVC Insulated 1 mm Single Core Flexible Copper Wires & Cables polycab /comptaon/hevells"

Havells 8M H Cover Plate

Havells 4M Cover Plate

Havells Crabtree Athena 2M Cover Plate

Havells 1M Cover Plate

LED Wall Light (IP44)

Havells Crabtree Athena 5 Step Fan Regulato

Havells Crabtree Athena 6A One-Way Switch (White)

Havells Crabtree Athena 6A-16A Three Pin Combined Shutter Socket

r - 2 Module

Havells Crabtree Athena 6A Five Pin Socket

Havells Crabtree Athena 16A One-Way Switch with Indicator (White)

Havells DHMGCDPF032 PVC Plastic 32A MCB DP C Curve (White)

Havells 32A Single Pole MCB, Multi, Standard (HA-SPMCB32)

Jaset Innovations Chipboard Screw with Saw Thread and Nylon Wood Dowel – White Zinc Plated – Flat Pozidriv Counter Sunk Head – Assorted Small Sizes – Pack of 258 pcs

Havells Ventil Air DX 200mm Exhaust Fan (White)

Concealed Light led Light

Havells/Crompton Fan 3 Blades Ceiling Fan