SPECIAL REPAIR TO 4 x TRAINEES TOILET BLOCK 01 x LADIES AND GENTS TOILET BLOCK AND VISITORS SITTING AREA AND ENTRANCE GATE AND CERTAIN ALLIED WORKS AT HARBAKHS STADIUM UNDER GE EAST DELHI CANTT

Amount

Dismantling of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Demolition of Reinforced cement Concrete in any description and any position n exc 15 cm thickness (below or above ground level)

Demolition cement concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed

Dismantling water tanks exc 500 Ltrs but not exc 1000 ltr capacity and removing to store.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

S&F Fiber Glass Reinforced Plastic (FRP) Door Frames of cross section 90mm x 45mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame complete all as speified and directed.Note : Colour and pattern shall be approved by GE.

S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) paneled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames complete all as specified and directed. Note : Colour and pattern shall be approved by GE.

S&F SS butt hinges 100mm long medium weight cold rolled mild steel etc

S&F SS barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F SS handle cast type of extruded section 125 mm long fixed with screws.

S&F SS sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F MS 250mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified

S&F in repair 20mm dia Stainless steel curtain rod with of superior quality fixed complete all as specified

S&F SS steel End bulb and SS bracket suitable for 20 mm dia drapory rod plete all as specified.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floors finished rough all as specified.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 20 mm thick screed bed in Cement Mortar (1:4) complete all as specifed and dircted .

Circular cutting or notching and waste on any thickness and size of tiles/granite etc complete all as specified and directed

Molding (Sandwitch moulding) of granite slab edges as directed by Engr-in-charge including polishing etc complete

M&L for Vetrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

Ditto as item no 24 but 10mm thick CM 1:4 as in backing coat for dado/skirting complete all as specified.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified

M&L Rendering10 mm thick in CM (1:4) as in backing coat for fixing wall tiles complete.

M&L 1st/Premium quality glazed ceramic digital coloured tiles with highlighter of size 600 x 1200 x 9-10 mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) in shelves & slab supported on walls pillar using cement concrete type B-1 1:2:4 (20mm gde agg) complete.

Formwork to soffits of suspended slabs such as shelves not exceeding 200mm thick rough finished flat surfaces of concrete complete all as spd and directed

Form work to edges of concrete flat exc 5 cm but n-exc 10cm wide for rough finished flat surfaces of concrete complete.

M&L TMT bar 10mm dia and over dia cut to length, bent to shape required incl cranking bending and binding with and including mild steel wire(annealed) not less then 0.9mm dia

Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site.

Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site.

Cutting chases for concealed water tubing or concealed conduitwiring, etc. and making good, cutting exceeding 20cm girth in CM 1:3 complete all as specified.

M&L Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete.

All as per Srl item No but 20mm bore complete.

S&F in repair for 15 mm dia Bib Cock fancy type cast copper alloy chromium plated with Wall Flange as per manufacture’s manual complete all as specified and directed

S&F in repair 15 mm Angle valves, fancy type, cast copper alloy chromium plated, screw down, high pressure with crutch or butterfly handle with wall flange complete.

S&F in repair 15 mm stop valves, fancy type, cast copper alloy chromium plated, screw down, high pressure with crutch or butterfly handle (Concealed type) with wall flange complete.

S&F in repair for 15 mm dia 2 Way Bib Cock, fancy type, cast copper alloy chromium plated, screw down, high pressure with Wall Flange as per manufacture’s manual complete all as specified and directed.

S&F in repair Wall mixture with CP Telephonic shower pipe fixed over wall surface as per manufacturets mannual and Square Over Head shower (200mmx200mm) including easy flex shower tube with hand shower 68mm dia round shape single flow (ABS body cast copper alloy chromium plated with rubit cleaning system etc complete all as specifed and directed

S&F in repair cast copper alloy chromium plated Center hole basin mixer with wall flage 15mm dia chromium plated brass with costed swinging spout including plugging and fixed as position complete

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair for corner Acrylic self up of size 225mmx225mm radius fixed in position complete.

S&F in repair for cast copper alloy chromium plated Toilet Paper Holder fixed in position complete.

S&F in repair for CP towel rail 300mm long fixed in position complete.

S&F in repair for CP Towel ring fixed in positon complete.

S&F in repair for Brass CP soap dish (Chrome) with wall flange fixed in positon complete.

S&F in repair Brass chromium plated shower rose 150mmx150mm mm size with or without swivel joints, any size incl SS shower arms fixing to steel pipe or union complete all as specified.

S&F CP Health faucet with 1.00Mtr long CP flexible pipe as per approved sample complete all as specified and as directed by Engineer-in-Charge.

5.50 mm thick looking mirror with decorative etching on border and moulded edges of requied size area exc 1 Sqm but not exc 2.00 sqm each with suitable fixing arrangements in wall complete all as specified and directed.

Stainless steel peg set (set of 06 hook) as per sample kept in GE office fixed in position with screw and PVC gutty on wall, fixed in repairs, complete all as specified and as directed.

S&F vitreous chinaware white colour oval shape counter top wash hand basin (WHB) size 550mm x 400mm complete, ISI quality, fixed over granite stone slab including providing and fixing of suitable waste pipe and waste fitting coupling 32 mm bore long screwed shank and fly nuts complete all as specified and directed.

S&F in repair Vitreous china squalting pan of Orrisa pattern long pan size 580mmx440mm white with 'P' or 'S' trap front or back inlet and foot rest any pattern including connection to trap and to flushing pipe etc complete including lime concrete bedding and making good to floor.

Vitreous china floor mounted toilet one piece type (white) including connection in drain etc incl ,plastic water closet seat cover, CP Jet sprey and P or S trap, fixed in repairs, complete all as specified and as directed. Make : Hindware Cat Part No 192055 or equivalent as per approved make list.

S&F in repair PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long complete.

S&F Rotational molded polyethylene tripple layered water storage tanks (cylindrical vertical with threaded lead) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres all as specified .

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for Iron pipe 20mm bore

S&F in repair Gun metal gate valve with iron wheel head screed both ends for iron pipe and fixed 20mmm bore complete

M&L in repair PVC (SWR)multy floor trap with grating in cluding jointing with solvent cement 63/100mm dia

S&F PVC (SWR) pipes, 100 mm external dia double socketed in any length with rubber joints, as in walls/floor complete all as specified.

S&F PVC (SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, as in walls/floor complete all as specified.

S&F PVC(SWR) bends suitable for 100 mm external dia complete all as specified

S&F PVC (SWR) junction single, (single T) equal or unequal of 100mm dia

S&F PVC(SWR) bends suitable for 75 mm external dia complete all as specified

S&F PVC (SWR) junction double, (double T) equal or unequal of 75mm with access door

S&F PVC (SWR) vent cowl of 110mm bore

M&L brick work with sub class 'B' st or curved on plan exc 6 m mean radius built in cement mortar 1:6

M&L for Brickwork with subclass `B' bricks, straight or curved on plan to any radius in half thick brick built in CM(1:4)

M&L for 40 mm thick in Plain cement concrete type B1 ( 1:2:4)( using 20 mm graded aggregate ) as in floor finished surface finished even & smooth with using extra cement Note :- Washed crushed stone sand will be used for floor work at described proportion.

Taking down cement plaster on brick wall including racking out joints hacking for key scrubing down with water etc

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and fair cement, all as specified . Note: Washed crushed stone sand will be used for plaster work as described proportion.

M&L for 10mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and fair complete all as specified . Note: Washed crushed stone sand will be used for plaster work as described proportion.

M&L for 15 mm thick external rendering on brick work or cement concrete surfaces in cement mortar 1:4, finished even and fair incl mixing of water proofing compound complete all as specified. Note: 1. Water Proofing compound shall be measured and paid for separately 2. Crushed stone sand will be used for plaster work as described proportion.

M&L for preparation Internal wall and ceiling surface complete removal of existing treatment of walls by mechanised sander of Berger Paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools as required and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying one coat of primer and applying two coats of premium qualiy exterior acrylic emulsion paint (weather coat) on surfaces complete all as specified and directed by Engr-in-charge. Note : (i) Final finishes to be applied with roller.

M&L for preparation Internal wall and ceiling surface by complete removal of existing treatment of walls by mechanised sander of Berger Paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools as required and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying one coat of primer and applying two coats of interior grade acrylic emulsion paint premium quality on surfaces complete all as specified and directed by Engr-in-charge. Note : Final finishes to be applied with roller.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pimer all as specified.

Preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint all as specified. Ht of steel member upto 8 mtr.

Demolition of lime terracing /Brick bats/Mud phuska /any thickness including old membrane /plastering and leaping complete all as specified and dierected.

M&L for PCC 1:3:6 type C1 with 20 mm graded stone aggregate as in padding over roof slab for making slope on roof top surface finished even and fair complete all as specified and directed.

M&L for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) mixed with WPC complete all as specified and dierected. Note : WPC shall be measured and paid separately

Material and labour for APP polymaric water proffing membrane minimum 3 mm thick and weighting not less than 3.50 kg /Sqm Make as per approved manufactured list black finished rienforced with non weven polystere matt with fusiable finish laid over compatable bitumen primer at the rate of 0.40Ltr/Sqm torching overlaps with a propane of abugane gas torch , with over lap 75 mm at the sides and 100 mm at the ends and sealing all as per manufacture's instructions including preparation of surface, complete all as specified and as directed.Note : the wate profing treatmen shall be carried out by the manufacture or their authorised applicators.

M&L for cutting holes into of through brick walls exc half brick but n exc one brick built in cement mortar for inserting hold fast and making good dismental porton in cement mortar 1:3 or cement concrete 1:2:4 type B1 all as specified and directed

M&L for Mild steel work as in Hollow section, angle Iron, flat Iron for fixed indepently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attchment and curved shaped by welding (thickness of metal n.exxc.6mm) making jointless by filling including cutting etc complete all as specified.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws incl taking down existing AC corrugated sheet complete all as specified.

ditto as item No 87 but plain sheet complete all as specified and directed.

Dismantling structural steel work including doors, gates,rafter ,purlin etc similar works complete all as specified and directed

M&L for steel gate Ornamental type/Grill work including hold fasts, pintels, stoppers running rails, bushes and all as CI decorative pieces, locking arrangement etc complete all as per design approved and as directed by Engr-in-charge work conforming to Fe-410-O etc complete.

M&L for Chequered cement concrete tiles bullnosed 30cmx 30cm x 30mm thick, set, jointed and pointed with grey cement and pigment in neat cement slurry in floors complete.

Machine cut kota stone slab flooring 20-25mm thick over 15mm th screed bed in CM 1:4 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and mirror polishing complete.

Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10 mm th screed bed in cm 1:4 cement screed and jointed with ditto as per item above

Stainless steel letter, comma, dash, logo etc., of 300mm height and 32mm depth made of 1mm thick stainless sheet with seemless welding rubbed, polished and edges made smooth with necessary fixing devices, complete all as specified and as directed.

Aluminium composite panel sheet 3mm thick of approved make joint with cilicon/adhesive as per manufacturer instrction including with necessary MS framed work as required shape and sized by welding etc in ceiling/coloumns and in vertical surface complete all as specified and directed. Note : 1. MS framed work shall be measured and paid separately. 2. Colour and pattern of Sheet will be appoved by GE 3.The rates of necessary scafolding and working platform is included in quoted rate and work is to be carried at approximate 4mtr height.

Grinding/Polishing to existing floor(marble/kota stone) by mechanical/ hand grinder including polishing complete all as precified and directed

M&L for followings :- (i) Removing plaster & finishes all around the coloumns, slabs & beams (on all four sidescription of column to full height , three sidescription of beam to entire span & bottom of slab to area as directed) (ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible) (iii) Removal of cover concrete with under cutting of up to a depth of 20mm beyond reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed) (iv) Cleaning exposed concrete substrate by using water jet. (v) Removing visible rust along the length of reinforcement using hand tools as approved. (The Engr-in-charge may order sand blasting if rust is approved) (vi) Any other work as directed by Engr-in-charge to present clean surface for determination of type of repair to be carried out complete all as specified and directed.M&L for providing rust proof /anti corrosive treatment to bars :- (i) cleaning of all exposed bars (new & old) alround (ii) Apply a single coat of Alkaline rust converting primer on alround bars new & old as recommended by the manufactuer (iii) Apply two coats of Epoxy phenolic anti corrosive protective coat on bars alround new & old as recommended by the manufactuer. Note : Anti corrosive treatment shall be continuous espcially in the regions where pitting, imperfections, etc were present on the surface of the bars. It is important that the rear portions of re bars (those towards the concrete substrate) should not be left without coating.

M&L for providing PMM (Polymer modified cementitious mortar) :- (i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed.

M&L for Providing & Pouring Micro concreting M-40 grade :- (i) Dry concrete substrate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound concrete substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, Make : MasterEmaco S46T of BASF or equivalent FOSROC/SIKA using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc,. Adding of aggregates will be permitted only as per manufacturer’s recommendation without compromising the strength. The rate shall include cost of all materials (except re-bar) labour charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc., to carry out the complete work complete all as specified and directed. Note : The cost of micro concrete M-40 grade & Epoxy bond coat is inclueded in this item.

Supply of liquid water proofing compound

M&L for 10-12 mm thick polymer modified ready mix cement based plaster make ultratech (brand name readiplast) or equivalent as approved by GE in ratio 1:4 on brick or concrete surface etc. On wall finished even and fair without using extra cement all as specified

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, light fittings , ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing complete all as directed.

Material and labour for point wiring complete at stadium height with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm min dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers including cutting & chasing and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly with and incl Metal flush box covered with modular plate of suitable size for fixing modular switches/sockets etc for one light point / fans point controlled by one 1-way switch complete all as directed.

All as per srl item no. 101 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for one socket outet point 5 amps on the same board..

All as per srl item no. 101 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for one socket outet point 5 amps on the independent board..

All as per srl item no. 101 here-in-before but with 4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for 15 Amp power point.

S & F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S & F modular socket two-in-one, 6 Amp universal type, 02 module size complete all as directed.

S & F modular Socket, 16 Amp, multipurpose shutter type, 02 module size complete all as directed.

S & F Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as directed.

Supply and fixing Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

Material and labour submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm as earth wire in and including PVC conduit of size 25 mm dia, medium grade and conduit fitting such as tees, bends, elbow, reducers etc complete all as directed.

Material and labour submain wiring complete with 2 x 6.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 6 sqmm as earth wire in and including PVC conduit of size 25 mm dia, medium grade and conduit fitting such as tees, bends, elbow, reducers etc complete all as directed.

M&L XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volt, size 25 sqmm 3.5 core complete all as specified and as directed.

M&L XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volt, size 16 sqmm 2 core complete all as specified and as directed.

Supply and fixing lamp holder PVC/ polycarbonate type suitable for batten fittings complete all as directed.

Supply and fixing in replacement of wall light fitting comet type for LED lamp complete all as directed.

S & F LED batten fittings 10Watts, cool/warm white complete all as specified and directed.

S & F LED battens fittings, 1x20Watts, cool/warm white ,connecting up with three core flexible copper wire complete all as specified and directed.

S & F suspended architectural 40w LED luminaire provides soft-light and glare free symmetrical illumination ( with continuous mounting end cap) fittings with hanging arrangement , complete all as specified and directed.

S&F in replacement of Recess mounting 2'x2' square flat panel ultra slim scoop LED light 36 watt warm/cool white with driver etc suitable for Grid ceiling/Gypsum board/POP ceiling incl making electric connection complete as as directed.

Supply and fixing in replacement of LED ceiling light fitting 10 watt, in round shape, surface/recess type cool/warm white as per site requirement and making all electric connections complete all as directed.

S&F in replacement of LED bulk head fitting 6.5 watt made of cast aluminium alloy with opal glass diffuser complete all as specified and directed.

Supply and fixing in replacement of area lighting LED flood fitting 50W complete all as specified and as directed.

S & F Modular Fan regulator step type, 120 watts, 2 Module size complete all as directed.

Taking down of ventilating fan any type, size complete all as specified.

Supply and fixing of Ventilating fan 250 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed.

Taking down ceiling fan/Ex fan/wall fan, sealing cable end dismantling blades and removing fan and blades to deposited E/M store yard complete all as specified.

S&F of ceiling fan complete with blades ,down rods ,electronic regulator and accessoriess ,230 volt ,1400mm sweep, . min air delivery 245 CFM with service value 5.00 BEE 5 star rated with BLDC, complete all as specified.

S&F of Exhaust fan 300mm sweep single phase( inbuilt gril), fixed in wall with proper nuts & bolts as reqd and incl connecting provn of PVC insulated and sheathed three core copper conductor flexible cable of size 23/0.0076mm to connect exhaust fan to ceiling rose all as directed.

Supply and fixing in of Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections complete all as directed.

Taking down of Geyser any type ,size & to deposited E/M store yard complete all as specified.

Supply and fixing of Geyser 25 ltr capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners for hanging and CP and PVC connection for inlet and outlet upto stop cock including complete all as specifed and directed.

S & F in replacement of LED Bollard Fittings 10W suitable for pathway lights incl making electric connections complete all as specified and directed.

S & F in replacement garden light pole GI pipe medium grade 40mm dia,height 1.5 mtr suitable for fixing of garden light fitting including painting with black synthetic enamel paint (2 coat) over a coat of red oxide primer complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass conc in ratio 1:3:6 type C2 with 40mm stone graded complete all as specified.

Supply and fixing in replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.

Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections complete all as directed.

Supply and fixing of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

S&F of MCB DB confirming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

S&F of MCB, SPN, 40 TO 63 Amp, C curve type 10 KA, 415 Volt.Make :INDOASIAN/Legrand/L&T

Supply and fixing of LED post top lantern fitting powder coated aluminium die cast and spun aluminium with clear/opal diffuser 25 Watt incl LED driver with gallary suitable for mounting on 32/40 mm GI pipe including necessary electric connections complete all as directed.

S & F of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.

M&L GI bracket 1.5 mtr long 32mmTubes, 'light grade' galvanised, with all fitting such as nuts and bolt and fixed complete to walls, complete all as specified and directed by eng-in-charge.

Supply and fixing of MCCB 3 pole ,415 V Adjustable type 100Amp with breaking capacity 16KA.

Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6.3 mm thick burried in ground vertically to a depth not less than 2.25 meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15 cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth lead of size 4 mm by means of galvnised nuts, bolts and washers. GI wire of 4 mm dia laid in 15 mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor).

Singh Associates

Baljeet Builders & Interior Decorators

M/s Shubh Enterprises

Gaurav Construction Company

M/s SAAR ENGINEERS