Construction of 4 Lane at Yamuna Expressway to Vrindavan (Pagal Baba Temple) (ODR) in District Mathura

Amount

Construction of embakement with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300.-2 As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Cement Treated Crushed Stone Sub base By Mix in Place Method Construction of Granular Sub Base by providing graded material, mixing, carriage of mixed material to work site spreading in uniform layers with motor grader on prepared surface, mixing with as per norms cement at OMC and compacting with Vibratory power roller to achieve the desired density, complete as per clause 401 as per SR.Ref No.-4.08, 403 (B) As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

WMM with 4% OPC Cement (CTB) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam (WMM) after mixing with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying with 4% OPC cement in Uniform single layer on sub base/subgrade and compacting with the road roller to achieve th desire density. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

WET MIX MACADAM (Plant Mix Method) Providing, laying, Spreading & Compacting graded stone aggregate to wet mix macadam specification including premixing the material and water at O.M.C. in machenical mix plant carriege of mixed material by tipper to site, laying in uniform layers with paver in sub-base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MoRT&H Specification 406. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

GRANULAR SUB-BASE with Graded-1 Material (Table: - 400-1) (B-By mix in Place method) Construction of Granular Sub Base by Providing Granular Material, spreading in uniform layers with Motor Grader on prepared surface, mixing by mix in placed method with Froont & Loader at OMC and compacting with Vibratory Roller to achieve the desired density, complete as per clause 401 As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sum using mechanical means. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Emulsion Treated Crushed Stone Base (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate mixed with 1% Cement & 3.5% Emulsion to crushed stone treated base specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Tack Coat on Granular surfaces treated with primer Providing and applying tack coat with bitumen (VG-10) using emulsion pressure distributor at the rate of 0.25 kg per sum on the prepared bituminous surface cleaned with mechanical broom. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Bituminous Concrete Grading-II Providing and laying Bituminous Concrete with Higher capacity batch type Hot Mix Plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.40% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth Wheeled vibratory & Tandom Rollars to acheive the desired compaction as per MORT&H Specifications clause 507 Complete in all respects. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Providing and laying cement concrete in 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. In Foundation and floors as per SI.No. 4.1.4, As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Providing and laying cement concrete in 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) and curing complete, Including cost of form work. In Foundation and floors. as per SI.No. 4.1.2 As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Wall painting (one coat) with plastic emulsion paint of approved brand and manufacture on decorative wall surface to give an even shade including thoroughly brushing the surface clean all of dirt, grease loose pieces and prepare smooth. as per SI.No.-23 As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. SI.No.-251 As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Class-150 (Non Modular) brick work in 1:3 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work .SI.No.-4 As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Providing and laying cement concrete in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors. SI.No.-2 As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. SI.No.-1 As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Laying of (1000 mm Np-3 hume pipe) RCC hume pipe in of Class NP-3 of approved make of quality at site complete. Including all taxes as per direction of engineer Incharge. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Laying of (600 mm Np-3 hume pipe) RCC hume pipe in of Class NP-3 of approved make of quality at site complete. Including all taxes as per direction of engineer Incharge. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Laying of (350 mm Np-3 hume pipe) RCC hume pipe in of Class NP-3 of approved make of quality at site complete. Including all taxes as per direction of engineer Incharge. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by EIC with in a distance of 60 meters (200 feet) as per SI.No.-692 As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. As per MORTH No. 304 As per MORTH No. 304 As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. below foundation. As per MORTH No.1500, 1700 & 2100, 12.8 As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Reinforced Cement Concrete (M-30) in Open Foundation complete as per Drawing and Technical Specifications. in raft foundation. As per MORTH No.1500, 1700 & 2100, 12.8 G As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications. As per MORTH No. 1500, 1700 & 2200, 13.5 M-30 RCC in substructure As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification. As per MORTH No. 1500 &1600 1700, 14.1 M-30 RCC in top slab As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. As per MORTH No. 2700, 14.10 (Plain/ Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.) As per MORTH No. 1500, 1700 & 2100, 12.8 M-15 PCC below approach slab. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Reinforced cement concrete (cement concrete M-30) approach slab including reinforcement and formwork complete as per drawing and Technical Specification. As per MORTH No. 1500 &1600 1700, 2704 (case-ll), 14.11, 12.08 G M-30RCC in top slab. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Providing and laying 12 mm thick mastic asphalt wearing course on top of deck slab excluding prime coat with paving grade bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of 9.5 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces not less than 100 deg. C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 515. As per MORTH No. 515 & 2702, 14.50 50 mm Thk. Ashphaltic wearing course. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. As per MORTH No.2703, 1500, 1600 & 1700, 14.6, 14.1 M-40 RCC in Crash Barrier as per Table 4 of IRC:6-2014, IRC:5- 1998 and Section 2700 of MORT&H Technical Specifications. including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Supplying, fitting and placing HYSD bar reinforcement in structure complete as per drawing and technical specifications. As per MORTH No. 1600, 14.2 Fe-500 grade HYSD reinforcement complete. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. As per MORTH No. 2706 & 2200, 13.8 Weep Holes. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. as per MORT&H No. 710.1.4.of IRC:78 and 2200, 13.10 Filter media behind wall. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Burried Joint Providing and laying a burried expansion joint, expansion gap being 20 mm, covered with 12 mm thick, 200 mm wide galvanised weldable structural steel plate as per IS: 2062, placed symmetrical to centre line of the joint, resting freely over the top surface of the deck concrete, welding of 8 mm dia. 100 mm long galvanised nails spaced 300 mm c/c along the centre line of the plate, all as specified in clause 2604., 14.17 10 mm filler board expansion joint. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Tar paper in between approach slab and bracket. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Drainage Spouts complete as per drawing and Technical specification. as per MORT&H No. 2705, 14.90. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

RCC work Providing and laying in position specified grade of reinforced cement concrete , including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) as per D.S.R. No.-5.1.3. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Providing and laying Pitching on slopes laid over prepared filter media excluding boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications . As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST

Providing and laying filter material with 45-63 mm gauge SB-30 cm thick in two layers of 15cm thick underneath slope boulder pitching hand packed including cost of stone ballast, all labour and T&P etc. required for proper completion of work of also including for trimming of slope to proper profile and preparation of bed and cartage of SB by head load as per technical specification clause-2504. As per Morth specification including all labour, T&P, materials etc. and all taxes, labour cess but excluding GST Filter media underneath slope boulder pitching

HANU INFRASTRUCTURE PVT LTD

M/s Akash Deep Construction Compnay