REPLACEMENT OF EXISTING LIGHTS WITH LED LIGHTS AT T-79 BULDING CGSD, MUMBAI

Amount

Taking down carefully copper/aluminium point wiring (light,fan socket or power ) point complete,including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, tube light fitting,main switch,MCB and DB's etc complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC casing and caping of size 20 mm width or above as required at site with all accessories such as Tee ,Corner, overlaping connector etc.along the suface of walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including hylam sheet as per no of switchs modules flush mounted suitable for fixing piano switches , sockets,fan regulators etc. with necessary stainless steel cadmium plated screws and including 1.5 Sqmm PVC insulated, multistranded, FRLS type,unsheathed(Green colour),single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and directed for One light point / fan point controlled by one switch.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC casing and caping of size 20 mm width or above as required at site with all accessories such as Tee ,Corner, overlaping connector etc.along the suface of walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including hylam sheet as per no of switchs modules flush mounted suitable for fixing piano switches , sockets,fan regulators etc. with necessary stainless steel cadmium plated screws and including 1.5 Sqmm PVC insulated, multistranded, FRLS type,unsheathed(Green colour),single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and directed for One 5 pin 5 amps socket point controlled by one 5 amps switch on independent board .

M&L for point wiring complete with 2.5 sqmm single core PVC insulated, unsheathed, 1100V grade copper multistranded conductor cable (FRLS) drawn through in and including PVC casing caping (minimum 25mm in width), with its fittings such as Tee, corners, overlapping connectors, etc, fixed over walls, ceiling, floors etc, also including PVC insulated unsheathed, multi stranded copper earth continuity conductor 2.5 Sqmm cable (FRLS) (green) connected to common earth dolly and also providing hylam sheet, metal flush boxes as directed by the GE suitable for fixing of piano switches sockets etc, for one 3 pin, 16 Amps socket outlet on independent board controlled by one 16 Amps switch, complete all specified and directed. Makes for item No- 2 ,3 & 4 :- (i) Copper cable :- Finolex/ Havells/ Polycab (ii) PVC casing & caping :- Press fit/ Precision/ Supreme

Supply & fixing piano type switch 5 Amps ,1way,single pole complete all as specified and directed. Make :- Anchor/Crabtree/Havells/SSK

Supply & fixing piano type switch 15 Amps ,1way,single pole complete all as specified and directed. Make :- Anchor/Crabtree/Havells/SSK

Supply & fixing socket outlet 5 Amps, 3 Pin flush type complete all as specified and directed. Make :- Anchor/Crabtree/Havells/SSK

Supply & fixing flush type socket 15 Amps, 3 Pin complete all as specified and directed. Make :- Anchor/Crabtree/Havells/SSK

Supply and fix ceiling rose, 3 terminal ,PVC/Polycarbonate body, complete all as specified and directed. Make :- Anchor/Crabtree/Havells/SSK

Supply and fix factory made, sheet metal enclosure, double door, 240 volts, AC,SPN, distribution board 4 way, painted with epoxy based powder coated suitable for mounting MCB DP as incomer and MCB SP/DP as out goings and complete with and including 200 Amps rated copper busbar ,neutral bar,earth bar, connecting cable links with top and bottom removable gland plate, complete with IP 43 protection, all as specified and as directed. Make:- L&T/ Legrand/Schneider/Havells/Siemens

Supply and fix MCB, SP, 6 to 32 Amps, 10 KA, "C" series, 230V, complete all as specified and directed. Make :- L&T/ Legrand/Schneider/Havells/ABB

Supply and fix MCB, DP, 40 Amps, 10 KA, "C" series, 230V, complete all as specified and directed. Make :- L&T/ Legrand/Schneider/Havells/ABB

Supply & fix in repair LED tube light fitting 1X 20 Watt including LED light 20 watt, surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver , internally prewired, 230V,complete with all accessories such as electronic driver, LED strip, connector block etc. , making cable connection by providing three core 0.75 sqmm copper conductor cable PVC insulated, sheathed of adequate length from ceiling rose to fitting and necessary fixing arrangement at any height and removing old unserviceable light fitting any type , complete all as specified and directed. Make:- Havells Cat No. ENDURALINEARNEOBS20WLED865SPCWH or equivalent in Bajaj/PHILIPS/SHAKTI.

Supply and fix recess mounting down lighter LED light fitting round type 15 watts , high efficient , internally prewired, white powder coated housing with high efficient LED's and glare free full opal diffuser with IP20 protection and making cable connection by providing three core 0.75 sqmm copper conductor cable PVC insulated, sheathed of adequate length from ceiling rose to fitting complete with all accessories and necessary fixing arrangement at any height complete all as specified and directed. Make:- Halonix model No HLDLR-R06-WW 15 or equivalent make in Bajaj/Crompton/Philips

Supply and fix LED flood light luminaire 120 watts with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection comple with all accessories duly prewired and including fixing arrangement on high mast poles/wall surfaces etc. at any height providing clamps, nuts, bolts and washers etc. including removing old unserviceable items complete all as specified and as directed by Engineer-in-Charge. Make :Havells Cat P No JETAIRISFLS 120WLED757PASYMLTG or equivalent make in BAJAJ/Philips /Shakti

Supply and fix LED Bay light luminaire 120 watts , Energy saving, environment friendly & robust Highbay/Mediumbay LED IP65 luminaire with high efficacy comple with all accessories duly prewired and including fixing arrangement on high mast poles/wall surfaces etc. at any height providing clamps, nuts, bolts and washers etc. including removing old unserviceable light fitting , complete all as specified and as directed by Engineer-in-Charge. Make :Havells cat part No - SAUCERNEOP120WLED75760DLTG or equivalent make in /Bajaj/ Philips/Shakti

Supply and fix copper conductor cable , PVC insulated sheathed flexible multistranded ISI marked 1100 volts grade 3 core , 1.0 sqmm and including electric connection from ceilling rose to celling fans/light fittings and testing complete all as specified and directed . Makes :- Finolex/ Havells/ Polycab

Supply, installation, testing and commissioning LT panel board suitable for working on 3 phase, 4 wire, 415 volts, AC, 50Hz Outdoor type, cubicle, floor mounted, free standing, dust and vermin proof, air ventilation factory fabricated made out of 3.2 mm thick CRCA sheet duly powder coated and shall be CPRI approved and as approved by GE. The Panel shall have front and rear opening, locking arrangment, bus bar chamber and switch gear compartment, hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate, aluminium bus bar duly covered with heat shrink sleeves colour coded duly fixed on DMC/SMC insulators, aluminium strip connection from bus bar to outgoing MCCBs and copper conductor cable of adequate size for MCBs, housed in a separate bus bar chamber and control wiring adequate size and length, outgoing MCCBs shall have extended bus bar links and panel mounted on 50x50x5mm size MS angle iron frame duly painted including PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) in foundation design subject to approvel of AGE/GE to sent the site requirement. The minimum depth, height, width of panel is 450x1500x1200 mm respectively, minimum clearance from ground level is 450mm complete all as specified and directed and comprising of following :- (a) MCCB 125 Amps, FP, 35 KA, 415 volts, 50Hz-1 No (b) MCCB 63 Amps, FP, 35 KA, 415 volts, 50Hz-1 Nos (c) MCB 40 Amps, FP, 10 KA, 415 volts, 50Hz-7 Nos (d) Digital voltmeter, with VSS, Digital, Ammeter, with CTs & ASS-01 set (e) LED phase indication lamps RYB-01 set (f) Aluminium bus bar TPN 200 Amps rating - 01 set

Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6.3 mm thick buried directly in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 25 x 4 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Part-I provision of G I Pipe 40mm bore eight grade for protection of GI strip and GI watering pipe of 20 mm bore medium grade,GI funnel with wire mesh,including char-coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1,excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value, complete all as specified and directed.

Supply and lay new high density unplasticised polyvinyl chloride (uPVC) pipes of 15mm dia, including all fittings (bends, Tees, Elbows, sockets,U Clip etc) as required on site, complete all as specified and directed. (For cable protection.) Make -Finolex/Reliance/Supreme/ Precision. Note :- (i) Excavation & Earth work,sand cushioning, shall be measured and paid separately.

Supply and lay new high density unplasticised polyvinyl chloride (uPVC) pipes of 50mm dia, including all fittings (bends, Tees, Elbows, sockets, etc) as required on site, complete all as specified and directed. (For cable protection.) Make -Finolex/Reliance/Supreme/ Precision. Note :- (i) Excavation & Earth work shall be measured and paid separately.

Supply, laying in trenches/ducts/along wall/through pipes etc, testing and commissioning LT cable, XLPE insulated, galvanized steel strip armoured, 1100Volts grade with multistranded aluminium conductor of cross sectional area 50 sqmm, 3.5 core including making cable connections by providing necessary aluminium lugs duly crimped properly and stainless steel glands,nuts,bolts and washers etc complete in all respects, as specified and directed. Notes :- (i) The cable shall be in one length unless otherwise directed by the GE. (ii) Make of cable :- Havells/polycab/Finolex (iii) Excavation & Earth work, sand cushioning, shall be measured and paid separately.

Supply, laying in trenches/ducts/along wall/through pipes etc, testing and commissioning LT cable, XLPE insulated, galvanized steel strip armoured, 1100Volts grade with multistranded aluminium conductor of cross sectional area 06 sqmm, 02 core including making cable connections by providing necessary aluminium lugs duly crimped properly and stainless steel glands,nuts,bolts and washers etc complete in all respects, as specified and directed. Notes :- (i) The cable shall be in one length unless otherwise directed by the GE. (ii) Make of cable :- Havells/polycab/Finolex (iii) Excavation & Earth work, sand cushioning, shall be measured and paid separately.

Supply and fix FRP looping box of size 250x200x105mm with connector and including comprising of MCB SP 10 Amps, ISI marked , 240V complete with and including providing GI clamps,nuts bolts etc suitable for fixing on PCC pole/ wall etc complete all as specified and directed. (FRP Box Make:- National/Sintex,) (MCB Make:- Havells/Standard/ABB/L&T)

Cutting of existing road, concrete/bituminous surface by using of mechanical method of any type complete all as specified and directed Note:-PCC for making good road surfaces shall be measured and paid separately)

Material and labour for PCC (1:3:6) type C2 using(40 mm graded stone aggregate ) for making good distrubed road surfaces including necessary use and waste of form work complete all as specified and directed

Excavation in trenches , not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Returning, filling in soil including spreading , leveling, watering and well rammimg in layer n exc 25 cm thick each layer, complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed. SCHEDULE OF CREDIT : - Rs 35567.00

Shree Ayyappa Engineering

A P ENTERPRISES