Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.9 LAccepted-AOC | ₹42.9 L | L1 | Accepted-AOC AOC |
| 2 | L2₹44.9 L+₹2.0 L (4.56%)Rejected-Finance | ₹44.9 L+₹2.0 L (4.56%) | L2 | Rejected-Finance NOT LOWEST |
| 3 | L3₹45.3 L+₹2.4 L (5.57%)Rejected-Finance | ₹45.3 L+₹2.4 L (5.57%) | L3 | Rejected-Finance NOT LOWEST |
| Sl No | Description | Qty | Unit | SHREE SHIV SHANKER ENTERPRISE L3 | JAGANNATH ENTERPRISES L2 | VEDWANTI ENTERPRISES L1 |
|---|---|---|---|---|---|---|
| 1.00Note - (i) Work to be carried out on GL to 08th floor (including structures on terrace of build) from ground levels (ii) Rate for scaffolding and safety system for labour are included in quoted rates by contracter.) (iii) Safety Net and Water proofing covering materials shall be arrange by contracter while working at site and it will be deem fit in quoted rates by contracter. (iv) For All debris/waste disposal of all items contractor shall be responsible (v) Fittings removed during works (sunken, roof, bathroom tiling, etc.) shall be refixed in original position by the contractor at no extra cost, even if not separately provided in the BOQ (vi) This note is applicable for all items | ||||||
| 2.00 | NOTE FOR SL NO 2 & 3 : S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour or sheet of similar specification as directed by GE/ Engr in charge, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr in Charge
(a) Height upto and including 4th floor. | 150 | Sqm | 800 ₹1,20,000 | 1,000 ₹1,50,000 | 750 ₹1,12,500 Lowest |
| 3.00 | (b) 5th floor to upto and including 8th floor. | 150 | Sqm | 825 ₹1,23,750 | 1,200 ₹1,80,000 | 800 ₹1,20,000 Lowest |
| 4.00Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour or sheet of similar specification as directed by GE/ Engr in charge having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr in Charge | ||||||
| 4.10 | (a) Height upto and including 4th floor. | 25 | Sqm | 750 ₹18,750 | 1,000 ₹25,000 | 700 ₹17,500 Lowest |
| 4.20 | (b) 5th floor to upto and including 8th floor. | 25 | Sqm | 775 ₹19,375 | 1,200 ₹30,000 | 750 ₹18,750 Lowest |
| 5.00 | Fair cutting n exc 10 cm width or girth on exposed surfaces of brickwork ( Straight or
raking cutting ) such as in splays, chamfers, etc. including rubbed finish and waste complete all as spd and as directed by Engineer in Charge. | 50 | Sqm | 525 ₹26,250 | 200 ₹10,000 Lowest | 500 ₹25,000 |
| 6.00 | M&L for plain cement concrete( 1:2:4) type B0 using 12.5mm graded stone aggregate as in coping, kerbs or mud stops or rounded, chamfered in edges and benching ,including form work complete all as specified .
Note :- This item rate shall be included for formwork ( Straight or curved ) | 5 | Cum | 6,000 ₹30,000 | 8,000 ₹40,000 | 5,500 ₹27,500 Lowest |
| 7.00M & L for rolled Fe 410 (Gde E-250 A quality) mild steel Joist, channel, angle, or tee sections, fixed independently, including welding without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) . | ||||||
| 7.10 | (a) Height upto and including 4th floor. | 1,500 | kg | 100 ₹1,50,000 | 180 ₹2,70,000 | 95 ₹1,42,500 Lowest |
Tender Value
Refer Docs
EMD Value
₹87,900
Closing Date
22 Jun 2026, 6:00 pmClosed
GARRISON ENGINEER DAMAN
Garrison Engineer Daman, Tat Rakshak Vihar, Dalwada, Nani Daman Post, Daman (UT) PIN 396210
PROVISION OF TEMPORARY WINDOW SHADE AND ALLIED WORKS AT OTM BLDG MUMBAI AND PROVISION OF ALLIED WORK INSIDE SO WORKS CABINE AT RHQ (W) BY MES
2026_MES_769918_1
8960/E8
Open Tender
Civil Works
Works
180 days
MALABAR HILLS
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER DAMAN
₹87,900
21 Sept 2026
5 Jun 2026
24 Jun 2026
5 Jun 2026
22 Jun 2026
15 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 3 | (b) 5th floor to upto and including 8th floor. | 150 | Sqm | 10 | ₹1,500 |
| 4Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour or sheet of similar specification as directed by GE/ Engr in charge having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr in Charge | |||||
| 4.1 | (a) Height upto and including 4th floor. | 25 | Sqm | 10 | ₹250 |
| 4.2 | (b) 5th floor to upto and including 8th floor. | 25 | Sqm | 10 | ₹250 |
| 5 | Fair cutting n exc 10 cm width or girth on exposed surfaces of brickwork ( Straight or
raking cutting ) such as in splays, chamfers, etc. including rubbed finish and waste complete all as spd and as directed by Engineer in Charge. | 50 | Sqm | 100 | ₹5,000 |
| 6 | M&L for plain cement concrete( 1:2:4) type B0 using 12.5mm graded stone aggregate as in coping, kerbs or mud stops or rounded, chamfered in edges and benching ,including form work complete all as specified .
Note :- This item rate shall be included for formwork ( Straight or curved ) | 5 | Cum | 10 | ₹50 |
| 7M & L for rolled Fe 410 (Gde E-250 A quality) mild steel Joist, channel, angle, or tee sections, fixed independently, including welding without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) . | |||||
| 7.1 | (a) Height upto and including 4th floor. | 1,500 | kg | 100 | ₹1,50,000 |
| 7.2 | (b) 5th floor to upto and including 8th floor. | 1,500 | kg | 100 | ₹1,50,000 |
| 8S&F Mild Steel Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing with washer etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets , wind ties etc (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as spd | |||||
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
BOQ_862192.xls
BOQ • 0.59 MB
RAR_NITPAGES.pdf
Tender Documents • 0.63 MB
RAR_TENDER DOCUMENTS.pdf
Tender Documents • 0.99 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .