Providing Shed Arrangements works at Pudhu Colony Community Hall in Kalapatti Area Ward No 6 , East Zone.,Coimbatore Corporation.

Dismandling old damaged Brick in cement mortar walls under 3 mtr height and Chipping of concrete surface including all charges as per direction of departmental officers.,

Earth work excavation for foundation in hard stiff clay, stiff black cotton,hard red earth mixed with small size boulders SS.20B and sand,silt or other loose soil,wet sand, or silt not under water,light black cotton soil,sandy loam ordinary soil and tofull depth as may be directed expect in hardrock requiring blasting inclusive of shoring shuttering,and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed depositing the surplus excavated soil with in the compound in places shown by the departmental officers with intial lead and lifts and claening and levelling the site etc., complete.

Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted etc., complete complying with standard specification.

Supplying and filling in foundation and basement with Quarry Rubbish inlayers of not more than15cm thick well rammed watered and compactedetc., complete complying with standard specification.

Reinforced Cement concrete 1:1.5:3 (one cement,one and half M.sand & three course aggregate) using 20mm gauge hand broken/and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curingetc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Supplying, fabricating and placing in position RTS rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification

Shuttering for soffits of RCC Column,beams ,etc.,including strutting 3m high using mild steel sheets of size 90cmX 60cm X and B.G 10 stiffened with M.Sangles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cmc/c ) and supported by casurina props of 10cm to13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D) Data.38

FLY ASH BRICK WORK in cement mortar 1:5 (one cement and five sand) using best quality of second class (Table molded chamber burnt ) bricks of size 9"x4 ½"x3" for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining the required elevation shall be done without extra cost.

Plastering with cement mortar 1:5 (one cement and five sand by volume) 12mm thick for all internal/external surfaces like super structure, rainwater, ducts, elevation in all floors complying with standard specifications.

Special Ceiling Plastering and finishing all the RCC exposed surfaces such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc. with cement mortar 1:3 (one cement and three sand) 10mm thick and including hacking the surfaces and providing necessary cement mortar nosing beading as per size, specification wherever necessary using the same mix as directed by the departmental officers etc complete complying with standard specification.

Supplying and Laying Hydraulic Pressed Paver Block Providing and laying of 63 mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

Painting with First Quality Emulsion paint two coat including cleaning, scrapping, removal of dust and necessary plaster of paris putty works wherever required etc., complete.

Painting two coats over New iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete complying with standard specifications and as directed by the departmental officers.

Wiring with 2x1.5sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A F.T. switchwith painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point / Fan point

Wiring with 2 x1.5sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade insuitable heavy gauge MS conduit pipeon wall and ceiling with M.S.accessories inflush with wall with 150mm x 100mmx 75mm MS switchbox with 3mm thick hylum sheet cover for 5A 3pin non interlocking CS plug with continuous earthwire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point.

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.

Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wirefor service connection mains

Supply and run of 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GIpipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains.

Supplying and fixing of PVC Water Tank

Supplying and fixing of ms angle Truss and Door including cost and all accessories etc.,complete.

Fabricating supplying and fixing of prepainted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24guage having width 1050mm.The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixedwith shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet tobe fixed with making suitable corrugated,cutting the sheet into the requireds size and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying and fixing of Materials

63mm dia PVC Pipe 6kg/cm2

90mm dia PVC Pipe 6kg/cm2

90mm dia PVC Elbow

90mm dia Tee

Waste Not Tap