Providing, Supplying, Erection, Testing and Commissioning of Highmast at Ward 41.File No.89/25X6/4.2nd Call.

Providing and erecting 9mtrs.High hot dipped galvanized octagonal poles with bottom of 200 mmA/F, top100mm,A/Fmade from 3mm thick HT plate & 290x290x16 mm base plate with 1500 mm long decorative sword type double arm bracket complete ererted in an approved manner on provided foundation.Suitable size &type of foundation bolts.4nos.bolts type M20x750mm 'J' type foundation bolts (EN8 grade) (Rate 31094 after deducting amount of bracket 3496, 31094-3496= 27598

16.7Designing&casting withM-20cement concrete foundation suitable for9mtrs.Octagonal poles considering the safe soil bearing capacity at site as 10T/sqm at2mtrs.Depth including excavation, foundation nut bolts in an approved manner

Providing and fixing of ring carriage dia. not less than 750mm made of 50mm dia.GI pipe Light 'A' class for 70mm A/F top octagonal pole with required clamps, nut,bolt etc as required.

Supplying of floodlight with high power LEDof1to3 W each assembledon single MCPCB, system lumens output with efficacy>110lm/W.luminiare having color temp 6500K &50000 burning hrs life with minimum @L70, The colour rendering index of LEDlight should be more than70.Luminiare comprises of driver,PF0.95&surge protection 4KV.Housing madeof pressure die cast aluminium with heat resistant flatglass,IP66 protection. Submission LM80-08Form LED Source Manufacturer &LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory i/c connection lead, testing etc to complete thejob.2Yrs Guarantee certificate from manufacturer.200W make_havlls / bajaj/crompton.

14.1Supply of XLPE Insulated power cable (conforming IS-7098 ) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade,2core/3½core/4core ISI MARKED with Alu. Stranded /solid conductor ARMOURED 4 CORE 10 Sq.mm.(XLPE) make_ polycab/havells.

Supplying of MCB Isolators suitable for 240/ 415 Volts,50Hz AC supply with KA valuerating 10kA of approved make confirming to IS:13947-PartIII : 1993&IEC:60947-3:2001 (without enclosures) :-DOUBLE POLE 63 Amps.

Earthing with G.I. Earth plate 600mmX600mm X6mm thick including accessories and providing masonary encloser in cement mortor,cove rplate having locking arrangmenton the top and G.I. watering pipe 20mm dia 2.7 meter long etc. (but without char coal or coke and salt ) complete as required

Maintenance of High mast panel :- all material to be used shall be ISI markedChange of Contactor reknowned make.

Maintenance of High mast panel :- all material to be used shall be ISI marked Change of digital timer

Supplying, fixing,testing & commissioning wall / floor mounted LT Panel primer coated with two coat of enamel paint & provided with required gasket for dust/ vermin proof with degree of protection IP42 suitable for 415V 3 phase ,50 Hz ,4 wire system fabricated out of CRCA sheet upto 2 mm thick(1.6 mm for doors) with frame work of angle iron/ channel/ bolted type construction duly compartmentalised for incomer,bus section , outgoings ,cable alleys & CT,PT Ampere Meter ,Volt Meter , selector switches,Frequency Meter ,phase indicating lamps , energy Meter complete including cost of busbar supports,detachable cable gland plates,2 earthing terminals, internal wiring & fixing of separately supplied MCBs, MCCBs ,panel mounted Change over switch/SFUs, etc. as required but excluding cost of busbar strips,Ampere Meter, Volt Meter, Selector switch as per approved design & specification