MISC REPAIRS TO RCC JALLI DRAINS FOOT PATH AND COMPOUND WALL IN MOHAN NAGAR AND PRAKASH NAGAR UNDER AGE BR I CHANDIPUR AND REPAIRS TO CERTAIN MISC BR WORKS OF EM INSTALLATION AND OHT UNDER AGE BR I CHANDIPUR

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.

M & L for complete removal of existing treatment of walls plastered or unplastered and applying two coat of Premium Acrylic Smooth exterior paint with Silicone additives of required shade @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed. (for OHT Tank height execeeding 10m but not exc 20m)

M & L for preparation of old decorated surfaces of ceilng plastered or unplastered and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old decorated surfaces of wall plastered or unplastered and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls plastered or unplastered and applying one coat of Premium Acrylic Smooth exterior paint with Silicone additives of required shade @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.

Preparation of old surfaces of wood and wood based surfaces and applying one coat of synthetic enamel paint of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint to steel surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Taking down Chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exc. 1.50 Sqm but n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description n. exc 1 sqm each. complete all as specified and directed.

Taking down shutter of any description but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

M & L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M & L for Factory made of 30 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc for window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed .

M & L for Factory made of 30 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed .

M & L for preparation of new or previously untreated surface of wood of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and directed

Taking down and refixing shutter after repair of any description n. exc 1 Sqm each in same opening complete all as specified and as directed.

Taking down and refixing shutter after repair of any description exc 1 Sqm but n. exc 2 Sqm each in same opening complete all as specified and as directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube complete all as specified and directed .

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed .

S & F for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed . (for wooden doors)

S & F for butt hinges medium weight cold rolled mild steel of 75 mm size. complete all as specified and directed . (for wooden windows)

S & F for Stainless steel butt hinges of 75 mm size. complete all as specified and directed . (for PVC door)

S & F for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F for 100 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F for 100 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F for 150 mm long aluminium plate type II hook & eye for window shutter complete all as specified and as directed.

S & F for 250 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M & L for flat iron for hold fast of doors / windows confirming to FE - 290 Gde E-165 complete all as specified and directed. (Flat Iron 250 x 30 x 3 mm thick @ 0.707 Kg / RM)

Cutting holes for inserting hold fasts in Brick walls built in cement mortar and making good disturbed portion in PCC (1: 2 :4) type B1 or in cement mortar (1:3) as required, depth of embedded portion exceeding half brick but not exceeding one brick for full brick walls, complete all as specified and as directed .

Demolition of brick work or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified & directed.

M & L for Brick work with flyash bricks old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 etc complete all as specified & directed.

M & L for brick work with old size bricks straight or curved on plan exc 6 m mean radius in cement mortar 1:6 but except bricks complete all as specified & directed.

M & L Brick work with sub class ‘B’ Brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified & directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in surface channel, coping etc. and removing debris and rubbish out of the premises complete all as specified & directed.

M & L for providing 40 mm thick PCC 1 : 2 : 4 type B-0 (using 12.5 mm graded stone aggregate) as in floor complete all as specified and directed.

M & L for 38 mm width glass dividing strips, 3 mm thick inserted in position, conform to design complete all as specified and directed.

M & L for 75mm thick plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in harstanding complete all as specified and as directed.

Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and as directed.

M & L plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in coping kneelers, apex stones, bed plates, kerbs, etc. complete all as specified and as directed.

M & L for plain cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in surface channels and drains, etc.

Extra for forming fair finished of drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped

M & L Precast Cement Concete louvres and jalli 1:3:6 (Nominal Mix) type B-0 using 12.5mm graded stone aggregate, set in Cement Mortar (1:4), 25 mm thick, including all moulding but excluding frame including demolition of old jalli complete all as specified and as directed.

Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for 5 mm thick rendering in CM 1:3 on ceiling finished even and smooth on wall complete all as specified and directed.

M & L for 10 mm thick rendering in CM 1:6 on brick or concrete surfaces finished even and smooth on wall complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of wall finished even & smooth complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4 on brick or concrete surfaces finished even and smooth with integral water proofing compound (IWPC Measured and paid seperately) on wall complete all as specified and directed.

M & L for preparation of newly plastered / unplastered surfaces of ceiling surfaces and applying two coats of white wash complete all as specified and as directed.

M & L for preparation of newly plastered / unplastered surfaces of walls and two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed.

Preparation of new plaster surface of wall and applying two coats of Premium Acrylic Smooth exterior paint with Silicone additives of required shade@ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

M & L for Preparation of new or previously untreated plastered surfaces of any description over 10 cm girth or width, not other wise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Preparing new steel or iron surfaces of any description n exc 10cm width or girth when and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Supply only integral liquid water proofing compound

Taking down care fully steel rolling shutters of any size complete gear operated / mannual operated complete all as specified and directed.

S & F for Steel rolling shutters, with out ball bearing thickness of lath 1.25 mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

Refixing of steel rolling shutters including necessary repairs / replacement of spare parts if required and cleaning dust, greasing etc including making good the disturb surface of brick / RCC wall in existing complete all as specified and directed.

M & L for preparation of new steel surfaces over 10 cm in width or girth and applying two coats of aluminium paint over a coat of aluminium red oxide primer complete all as specified and directed.

M & L for preparation of old steel surfaces over 10 cm in width or girth and applying one coat of aluminium paint complete all as specified and directed.

Supply only 75 mm wide, 1.25 mm thick MS profile for rolling shutter, riveted / welded were necessary including taking out old unserviceable profile one coat of red oxide primer and painting one coat complete all as specified and directed.

S & F in repairs ball bearing for rolling shutter complete all as specified and directed.

S & F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Supply only MS spring 40 CM long for rolling shutter for counter balancing the weight of rolling shutter complete all as specified and directed.

S & F in repairs gear box with handle complete all as specified and directed.

S & F in repairs 0.80 mm Mild steel, plain, black sheet in rolling shutter cover hood, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S & F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with Fe-410- W(Gde- E-250) quality- B complete all as specified and as directed.

S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

Dismantling Fencing wire mesh, any type.

Dismantling barbed wire of any type

S & F PVC coated MS galvanised chain link fencing of 2.00 mm dia GI wire and outer dia 3 mm mesh size 75 x 75 mm (including thickness of PVC coating) approved quality all as specified.

S & F for galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out emebedded portion of concrete, brick work, masonry and making good disturbed ground.

Excavating in post holes not exc. 0.5 cum in each and getting out in soft / loose soild and removing surplus soil to a distance not exc. 50 mtr and making good the surface.

M & L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filing and mass concrete complete all as specified & directed.

Providing reinforced cement concrete (nominal mix) type B-I, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm but n. exc 250 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred topes as directed and fixed.

S & F for flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 10cm and n exc 15cm long of 12 mm dia complete all as specified and directed.

S & F for mild steel bars round bar 10mm dia and over, cut to length, bent to shape required for securing chain link fencing of grade Fe-410-W(Gde E-250) quality A complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for Precast Reinforced Cement Concete 1:2:4 (Nominal Mix) Type B-1 using 20 mm graded stone aggregate as in cover slabs set in Cement Mortar (1:4) including necessary form, mould work, etc. complete all as specified and as directed.

M & L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and as directed.

M & L for 15 mm thick screed bed or bedding layer for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.

M & L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate as in sub base to receive tiles.

M & L for granite work (of any type) 20 (+/- 2) mm (table rubbed and polished) in pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L Paving vitrified parking tiles 300 mm x 300 mm x 12 mm thick (heavy duty), set, jointed and pointed in neat cement slurry as in foot path with white cement and pigments complete all as specified and as directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm/ 30cm x 30cm x 25mm thick, pre-polished set, jointed and pointed in neat cement slurry with grey/colour cement and pigment in floors complete all as specified and as directed.

ELECTRO COMMERCIAL CO

RPL SYNDICATE CO

jlenterprise

Bansal And Co

RANA ENTERPRISES

chauhan syndicate

M/s MANIK SETHI

Bidder Name

RANA ENTERPRISES

DS ENTERPRISES

RPL SYNDICATE CO

Bansal And Co

chauhan syndicate

ELECTRO COMMERCIAL CO

jlenterprise

M/s MANIK SETHI