Loading…
Loading…
Tender Value
₹4.4 Cr
EMD Value
₹8.9 L
Closing Date
25 Apr 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DYCEEC
14 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less crores; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIII, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a)The tenderer must have successfully completed/substentially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed/substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works , each costing not less than the amount equal to 40% of advertised value of each component of tender, ora One similar work, each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values for each component can also be considered for fulfillment of technical eligibility criteria. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than Rs. 2 crore each. The tenderer shall submit the completion certificate as per proforma given in annexure-IV-A or IV-B or IV-C as applicable or in the format containing all information as required as per the Annex. IV-A or IV-B or IV-C. Note :- Criteria for the completed work/Substantially completed has been given in the General instructions in the tender document. Similar nature of work: - "Any Electrical work related to HT/LT installations."
Only such Tenderer(s) who satisfy the following eligibility criteria shall be considered : The contractor should have valid Electrical contractor license issue by Govt. and submit along with tender document. If valid Electrical contractor license is not submitted along with tender documents then offer will be summarily rejected.
62 conditions · 7 needing a document upload
Mandatory in case Bid security amount is prescribed in STD Para 5.1.2 - The Bid Security shall be deposited in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- XXXII and shall be valid for a period of 90days beyond the bid validity period.
In case the tenderer is (i)Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' - shall be exempted from payment of Bid security deposit and shall submit certified copy of the registration/ Valid document issued by DIPP (mandatory if applicable)
In case the tenderer is (iii) Labour Cooperative Societies - shall deposit only 50% of the Earnest Money Deposit and shall submit certified copy of the registration/ Valid document issued by the relevant Ministry/ Labour commission (mandatory if applicable).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall submit the Firms's detail as per Annexure I. (Mandatory for all firms)
The tenderer shall submit the copy of certificate as per proforma given in Annexure II. & IIA(Mandatory for all firms)
The tenderer should submit the List of similar nature of works physically completed/substantially completed in all respects during last 7 years , ending last day of month previous to one in which tender is invited,(i) directly awarded by Govt./Semi Govt./Public sector undertaking / Autonomous bodies /Municipal bodies/ Railways Siding owners (ii) Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender/ as per proforma given in Annexure-III. In case of JV firm, these details are also required for all the members of the JV firm. In case, the Secondary Component(s) has/ have been defined, the details of successfully completed works of similar nature (that defined for the Secondary Component), executed by tenderer himself / the subcontractor (fully by any one or jointly i.e. partly by tenderer and remaining through subcontractor) during last five years, shall also be submitted (for five years )
In case of composite work, having distinct components and having separate schedule for each component having value more than 2 crores, tenderer should submit a details of work of similar nature successfully completed/substantially completed during last 7 years , ending last day of month previous to the one in which tender invited and detailed in Annexure-III (Bifurcated as per components of tender schedule), as per proforma given in Annexure-III-A. (Mandatory in case of tender for composite nature of work). In case of JV firm, these details are also required for all the members of the JV firm. In case, the Secondary Component(s) has/ have been defined, the details of successfully completed works of similar nature (that defined for the Secondary Component), executed by tenderer himself / the subcontractor (fully by any one or jointly i.e. partly by tenderer and remaining through subcontractor) during last five years, shall also be submitted (for five years ).
The tenderer shall submit the Attested copy of Completion Certificate/ substentially completed of works mentioned in Standard Technical Criteria under eligibility criteria above from the Organizations with whom they worked as per proforma given in Annexure-IV-A or IV-B (If the work is substantially completed) or IV- C (if the work is awarded by Public listed Company) as applicable. (Mandatory for all firms). In case of JV firm, these details are also required for all the members of the JV firm. In case, the Secondary Component(s) has/ have been defined, the Attested copy of Completion Certificate of works executed by tenderer himself / the subcontractor (fully by any one or jointly i.e. partly by tenderer and remaining through subcontractor) during last five years, shall also be submitted.
Details of Average Annual turnover of the public listed company (company should be 500 Cr and above) issued by Chartered Accountant. These details need to be submitted as per the proforma of Annexure VIII ( Mandatory in case of completion certificate issued by public listed company as per annexure IV- C)
The copy of the documents regarding listing in the National stock exchange or Bombay stock exchange with details of status of listing as on date of opening of tender, duly self-attested. (Mandatory in case of completion certificate issued by public listed company as per annexure IV-C)
The copy of the document of incorporation/ registration of the Public listed company (should be at least 5 years prior to date of closing of tender), duly self-attested. ( Mandatory in case of completion certificate issued by public listed company as per annexure IV- C)
The copy of document regarding Person Authorized by the Public listed Company to issue such certificate, duly self-attested. ( Mandatory in case of completion certificate issued by public listed company as per annexure IV- C)
Tenderer shall also submit the relevant copy of work order, bill of quantities bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received a copy of final/last bill paid by the public listed company in support of above work experience certificate duly self-attested.(Mandatory in case of completion certificate issued by public listed company as per annexure IV- C)
The tenderer shall submit the self attested copy of the PERMANENT ACCOUNT NO. issued by the Income Tax Department.
The tenderer shall submit the test report of the stone ballast conforming to railways specifications as mentioned in the general instructions of tender document. (This condition is mandatory and will be applicable only for the tenders of supply of ballast as specified "as required" in tender document.In case of non-compliance of this condition by the tenderer in ballast tenders only, the offer of the same will be summarily rejected.)
The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIII, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
A statement showing construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender) taking into account the completed as well as work in progress as per Annexure-XIX on the letter head of Chartered Accountant, to evaluate bid capacity of the tenderer (Mandatory for tender value more than Rs. 20 Crores). In case of JV firm details of construction works executed by each member of JV is required to be submitted
The tenderer should submit the List of works on hand, existing commitments and balance amount of ongoing works as per proforma given in 'Annexure-V to evaluate bid capacity of the tenderer, duly verified by the Chartered accountant (Mandatory for tender value more than Rs. 20 crores)
The tenderer should submit the List of plants & Machinery available on hand (own) and proposed to be inducted/ Hired (own and hired to be given separately) for the subject work in Annexure-VI.
The tenderer should submit the List of Personnel, Organization available on hand and proposed to be engaged for the subject work in Annexure -VII.
The tenderer in the capacity of Sole Proprieter tenderer shall submit the affidavit duly executed on stamp paper and notarized as per Annexure IX. (Mandatory for Sole Proprietership Firm/ forJV firm having Sole Proprieter firm as a member)
The tenderer shall submit the Power of Attorney duly registered with registrar or notarized as per proforma given in Annexure XIV to be submitted by sole proprietor firm duly registrar with the registrar or notarized. (Mandatory for Sole Proprietership Firm , if tender documents are uploaded by any individual ,authorized by him) (Not required if tender documents are uploaded by proprietor himself).
The tenderer in the capacity of HUF shall submit the affidavit duly executed on stamp paper and notarized as per Annexure XXVI. (Mandatory for HUF firm/ for JV having HUF as a member) )
The tenderer in the capacity of HUF shall submit the Power of Attorney, duly executed on stamp paper and duly registered with registrar/ notarized as per Annexure XXVII. (Mandatory for HUF firm)( Required , if tender documents are uploaded by any individual ,authorized by him) (Not required if tender documents are uploaded by Karta himself).
The tenderer as partnership firm shall submit copy of partnership deed (duly registered with registrar or Notarized prior to the date of tender opening as per Indian partnership Act) (Mandatory for Partnership Firm /JV Firm having partnership firm as a member)
The tenderer as partner ship firm shall submit the Power of Attorney (duly registered with registrar or notarized) as per proforma given in Annexure-XIII to be submitted by Partnership firm. (Mandatory for Partnership Firm) (Required even if one or more partners are authorized in Partnership deed to sign and upload the offer on behalf of the firm.)
The tenderer in the capacity of Company shall submit the Copy of Memorandum of Association / Articles of Association of Company. (Mandatory for Company Firm / JV Firm having having Company as a member)
The tenderer in the capacity of Company shall submit the copy of resolution passed by Board of Directors authorizing its Director/Employee to deal with tender on behalf of company. (Mandatory for Company Firm)
The tenderer in the capacity of company shall submit the Copy of Certificate of Incorporation of the Company. (Mandatory for Company Firm/JV Firm having having Limited Company as a member)
The tenderer in the capacity of company shall submit the Power of Attorney/ Authorization (duly registered with registrar or notarized) including ratification clause duly signed by person authorized by the company as per proforma given in Annexure- XV. (Mandatory for Company Firm)( Required even if tender documents are submitted by the authorized/ power of attorney holder himself as per resolution passed by Board of Directors)
The tenderer in the capacity of Limited liabilities Partnership firm (LLP firm) shall submit the copy of LLP Agreement (Mandatory for LLP firm /JV Firm having LLP Firm as a member)
The tenderer in the capacity of Limited liabilities Partnership firm (LLP firm) shall submit the copy of Certificate of Incorporation (Mandatory for LLP firm /JV Firm having LLP Firm as a member)
The tenderer in the capacity of Limited liabilities Partnership firm (LLP firm) shall submit the copy of Resolution of Partners of LLP firm (executed on the Letter Head of LLP firm) in favour of the individual to sign he tender on behalf of the LLP firm and deal with tender on dehalf of the firm as per proforma given in Annexure-XX.(Mandatory for LLP firm).
The tenderer in the capacity of Registered Society/ Registered Trust shall submit the copy of the certificate of registration (Mandatory for Registered Society/ Registered Trust and JV firm having Registered Society/ Registered Trust as a member)
The tenderer in the capacity of Registered Society/ Registered Trust shall submit the copy of the Deed of Formation (Mandatory f o r Registered Society/ Registered Trust and JV firm having Registered Society/ Registered Trust as a member)
A copy of power of attorney in favour of the individual to sign the tender document and create liabilities against society/trust (Annexxure XXI)
The tenderer in the capacity of JV firm shall submit the Memorandum of Understanding of JV duly notarized as per proforma given in Annexure-X.(Mandatory for Joint Venture Firm)
The private/ limited company, sole propriter firm or HUF/Society/Trust partcipating as a member of JV shall submit the Power of Attorney duly registered with registrar or notarized as per proforma given in Annexure-XII (Mandatory), (For private/ limited company as member of JV- the annexure XII is required evenif MOU/JV agreement is signed by the authorized/ Power of attorny holder himself as per the Copy of Resolution) (For sole propriter firm/HUF as member of JV- Not required if MOU/JV agreement is signed by the proprieter of the sole propriter firm/ karta of HUF himself)
The tenderer in the capacity of JV firm shall submit the Letter of consent duly executed on stamp paper as per proforma given in Annexure-XI to be submitted by a partnership firm participating as a Member of JV firm. (Mandatory for Joint Venture Firm if one of the member is Partnership firm)
The tenderer inthe capacity of JV firm shall submit the Power of Attorney duly registered with registrar or notarized in favour of the individual to sign the MOU/JV agreement on behalf of the partnership firm and create libility against the firm as per proforma given in Annexure-XVIII.(Mandatory for Joint Venture Firm if one of the member is Partnership firm) (Required evenif MOU/JV agreement is signed by one or more partners authorised in the partnership deed, letter of consent )
The tenderer in the capacity of Limited liabilities Partnership firm (LLP firm) shall submit submit the Power of Attorney duly registered with registrar or notarized, issued by LLP firm as per proforma given in Annexure-XX. (Mandatory for LLP firm/ for JV having LLP as member) ( Required even if tender documents are submitted by the authorized/ power of attorney holder himself as per resolution passed by Parters of the LLP)
The tenderer in the capacity of JV firm shall submit the Copy of Resolution of the Partners of LLP firm, permitting the LLP firm to enter into a JV agreement, authorizing one of the partner of LLP firm to sign MOU/JV Agreement and such other documents required to be signed on behalf of the LLP firm and to create libilities against the LLP firm and / or to do any other act on behalf of the LLP firm as per proforma given in Annexure-XXIII (Mandatory for JV firm if one of the member is LLP firm).
The tenderer inthe capacity of JV firm shall submit the Power of Attorney duly registered with registrar or notarized (Backed by Resolution of the Partners of LLP firm) in favour of individual to sign the tender, to sign MOU/JV Agreement on behalf of the LLP firm and create liability against the LLP firm as per proforma given in Annexure-XXIV. (Mandatory for JV firm if one of the member is LLP firm).
The tendere in the capacity of JV firm shall submit the copy of resolution passed by Board of Directors of the Company, permitting the company to enter into a JV agreement, authorizing MD or one of the Directors of Mangers of the Company to sign JV Agreement, such other documents required to be signed on behalf of the Company and enter into liability against the company and/or do any other act on behalf of the company to be submitted as per Annexure-XVII. ( Mandatory for JV firm if one of the member is Limited Company)
The tenderers shall submit the information and particulars regarding retired Railway Engineer(s)/Officer(s) of the Gazetted rank and regarding Relative(s) employed in Gazetted capacity on North Western Railway as per proforma given in Annexure XXII (Mandatory)
The tenderer in the capacity of newly formed Partnership Firm/ LLP Firm, shall submit Declaration as per ANNEXURE XXVIII (Mandatory if tenderer is Newly Formed Partnership Firm/ LLP Firm. The following relevant documents are Annexed with bid - (mandatory as applicable) (1) Details of previous Propriety firm / Partnership Firm/ LLP firm as per annexure I (2) A copy of previous partnership Firm (Notarized or duly registered with the Registrar) (3) Affidavit as per proforma given of Annexure -IX for previous Propriety firm (duly executed on stamp paper and notarized). (4) Copy of previous LLP agreement and certificate of incorporation. (5) Dissolution deed/ splitting deed of the previous partnership deed or LLP agreement (in case of dissolution of previous partnership firm/ LLP firm) (6) Proof of surrender of previous PAN no (in case of dissolution of previous partnership firm, LLP firm or propriety firm) (7) Documents for the technical, financial criteria, bid capacity as claimed w.r.t. such partner(s) joining the new/ existing partnership firm, as per para 16.1 (c ), (d), (f),(g ), (k) of Bid document.
The tenderer in the capacity of existing Partnership Firm/ LLP Firm, shall submit Declaration as per Annexure XXXIX (Mandatory if tenderer is existing Partnership Firm/ LLP Firm. The following relevant documents are Annexed with bid - (mandatory as applicable) (1) Details of previous Propriety firm / Partnership Firm/ LLP firm as per annexure I. (2) A copy of previous partnership Firm (Notarized or duly registered with the Registrar) (3) Affidavit as per proforma given of Annexure -IX for previous Propriety firm (duly executed on stamp paper and notarized). (4) Copy of previous LLP agreement and certificate of incorporation. (5) Dissolution deed/ splitting deed of the previous partnership deed or LLP agreement (in case of dissolution of previous partnership firm/ LLP firm) (6) Proof of surrender of previous PAN no (in case of dissolution of previous partnership firm, LLP firm or propriety firm) (7) Documents for the technical, financial criteria, bid capacity as claimed w.r.t. such partner(s) joining the new/ existing partnership firm, as per para16.1 (c ), (d), (f),(g ), (k) of Bid document
The tenderer in the capacity of existing/ New Company, shall submit Declaration regarding constitution of the existing/ New Company as per Annexyre XXX (Mandatory if tenderer is merged Company). The following relevant documents are Annexed with bid - (mandatory as applicable) (1) Details of company getting merged as per annexure I (2) Copy of Memorandum of Association/ Articles of Association of the Company getting merged (3) Copy of certificate of incorporation of previous company getting Merged. (4) Resolution by the Board of Directors for the Merger of the company(s) with the tenderer (5) Proof of surrender of previous PAN no (6) Documents for the technical, financial criteria, bid capacity as claimed w.r.t. such Company(s) joining the new/ existing Company, as per para 16.1 (c ), (d), (f), (g ), (k) of Bid document
Tenderer shall submit a formal agreement duly notarized, legally enforceable in the court of law, executed by tenderer with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer as per performa given in Annexure XXXI. (Mandatory in case of secondary components are defined in the tender with special condition 'for submission along with the Offer)
The initial e-Reverse Auction ( e-RA) period as mentioed in the Clause no. 26.1 (b), Annexure C, Para 2 of the "GENERAL INSTRUCTIONS" of Tender Document will be as per railway board guidelines or as approved by Tender accepting authority . (Applicable to the works and service tenders of value more than Rs. 50 crore.)
The auto extension period as mentioed in the Clause no. 26..1(b), Annexure C, Para 2 of the "GENERAL INSTRUCTIONS" of Tender Document will be as per railway board guidelines or as approved by Tender accepting authority .(Applicable to the works and service tenders of value more than Rs. 50 crore.)
Left over miscellaneous electrical work under GC work in NDT-DOHM section, Doubling work in AII-CNA section and New BG Line work in BI-NMH section, NDT- NDT Town section and PUHT-MEC section.
ELCJPNDT-DOHMGCT1025
ELCJPNDT-DOHMGCT1025
Open
Works - General
24 Months
Jaipur, Rajasthan
₹0
₹8.9 L
25 Apr 2026
2 Apr 2026
11 Apr 2026
107 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,29,23,131 | ||
| — | 30.00 | — | — | ||
| Supply, install, test & commission of APFC Panel 50KVAR. As per specification. | — | — | — | 22,14,810 | |
| — | 8.00 | — | — | ||
| Supply, installation, testingand commissioning of load bank panel board with 1 X 100Amp. MCCB in the incomingand 4 X 63 Amp. MCCB in the outgoing. As per specification. | — | — | — | 5,58,800 | |
| — | 1800.00 | — | — | ||
| Design, manufacture of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical / Parabolic / Triangular shape. As per specification. | — | — | — | 38,26,800 | |
| — | 1800.00 | — | — | ||
| Display, installation of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical / Parabolic/ Triangular shape. As per specification. | — | — | — | 3,81,600 | |
| — | 12000.00 | — | — | ||
| Supply, Installation, testing & Commissioning of Station name in 3D letters as in a frame in Hindi and English matters. (Unit each word Height in inches). As per specification. | — | — | — | 22,92,000 | |
| — | 6.00 | — | — | ||
| Supply and testing of 3-phase, 440V, 50Hz, 5hp submersible bore well pump of head approx. 120M & discharge 1.66LPS, 3-Star & above and suitable control panel with starter (MCB, Ammeter, voltmeter, water level indicator, single phase preventer etc. for upto 5hp, 3-phase pump including connection . As per specification. | — | — | — | 2,51,802 | |
| — | 6.00 | — | — | ||
| Installation, testing and commissioning of 5hp bore well pump. As per specification. | — | — | — | 22,758 | |
| — | 30.00 | — | — | ||
| Supply, installation, testing & commissioning of LED fitting having input-16Watt, 48V AC supply & IP-67 protection under the pit line with suitable fixing arrangement. (Fittings shall be power LED based with prismatic diffuser, inbuilt electronic driver, made out of fire retardant material suitable for outdoor application).Fixture with white powder coating suitable for mounting. As per specification. | — | — | — | 1,46,730 | |
| — | 8.00 | — | — | ||
| Supply, installation, testing and commissioning of 2KVA, single phase, natural air cooled, copper wound step down transformer 230/40-72V outdoor type. As per specification. | — | — | — | 63,912 | |
| — | 30.00 | — | — | ||
| Supply, fabrication, testing & commissioning of Junction Box for through Cables with 01No. SP MCB, 6-32A, "B" series, 10KA in outgoing. As per specification. | — | — | — | 10,560 | |
| — | 625.00 | — | — | ||
| Supply & fixing of Inverter type LED tubelight fitting/batten PC 20W (Indoor type) as per RDSO specification RDSO-EEM0LKO(GUID) /1/2020. As per specification. | — | — | — | 4,56,875 | |
| — | 440.00 | — | — | ||
| Supply & fixing of Inverter type 36W LED street light fitting (Outdoor type) as per RDSO specification RDSO-EEM0LKO(GUID)/1/2020. As per specification. | — | — | — | 31,35,440 | |
| — | 1.00 | — | — | ||
| Supply, installation & commissioning roof mounted HVLS fan 12 feet dia with all accessories and suitable C channel with anchor fastners and necessary civil job as per site requirement with 03years warranty maintenance. As per specification. | — | — | — | 1,92,292 | |
| — | 4.00 | — | — | ||
| Supply, installation, testing and commissioning of control panel housing suitable timer control circuit for automatic ON & OFF of the 25/16/11 mtr.Mast lights at a pre-set time. As per specification. | — | — | — | 52,992 | |
| — | 4.00 | — | — | ||
| Supply, installation, testing, commissioning of LED Aviation light luminaries equivalent to Model No. of Bajaj BGAV 302. As per specification. | — | — | — | 17,784 | |
| — | 4.00 | — | — | ||
| Supply, erection, testing and commissioning of 16 M high mast shaft totally hot dip galvanized and suitable forwind velocity as per IS-875 part-3. The mast shaft shallbe in two finished section itshall also include all accessories for 16M high mast. | — | — | — | 8,21,860 | |
| — | 4.00 | — | — | ||
| Design and casting of suitable foundation with M-20 concrete for the 16mtr high masthaving the safe soil bearing capacity at site as 10T/sqmtr at 2 meter depth including supply of foundation bolts manufactured from special steel along with nuts, washers and anchor plates and templates and as per specification enclosed. | — | — | — | 82,992 | |
| — | 32.00 | — | — | ||
| Supply and fixing of 150/160W or above LED Flood light comprising Die cast aluminium housing with toughened glass complete with Electronic driver, Luminaries has the System lumen efficacy of 100Lumen/Watt. As per specification. | — | — | — | 6,38,720 | |
| — | 120.00 | — | — | ||
| Supply, Installation, testing & commissioning hybrid type Solar Street Light Fitting 30W. As per specification. | — | — | — | 30,00,000 | |
| — | 20.00 | — | — | ||
| Supply & erection of 12.8Mtr. Long lattice tower made of 65 x 65 x 5mm MS angle with 50 x 6mm MS flat for bracing including excavation of pit 1.50 x 1.50 x 2.10M in ground. As per specification. | — | — | — | 8,25,700 | |
| — | 4500.00 | — | — | ||
| Supply of material and stringing of ACSR Dog conductor size 6/1/4.72 Note:- Cost shall be quoted for per metre of conductor. As per specification. | — | — | — | 2,92,500 | |
| — | 60.00 | — | — | ||
| Supply, erection, testing and commissioning of 11/33 KV Disc/Pin insulator on SP/DP/Tower. As per specification. | — | — | — | 20,880 | |
| — | 20.00 | — | — | ||
| Supply, installation and erection of stay rod complete As per specification. | — | — | — | 11,700 | |
| — | 24.00 | — | — | ||
| Supply, installation, testing & commissioning of phase change over Distribution board with 01 No. 63A TPN MCB as Incoming and 1No. 63A SPN (DP) MCB as outgoing with 01 No., 4 pole, 63 Amp. phase change over switch (Selector switch) with multi LED indication lamps & bypass arrangement. As per specification. | — | — | — | 1,30,728 | |
| — | 500.00 | — | — | ||
| Laying, testing, commissioning & transportation of 11/33KV HT cable in Air/Pole/Pipe/ Trench etc. Note- Cable will be supplied by Rly. from main depot. As per specification. | — | — | — | 40,000 | |
| — | 400.00 | — | — | ||
| — | 500.00 | — | — | ||
| — | 50.00 | — | — | ||
| — | 24.00 | — | — | ||
| — | — | — | 14,568 | ||
| — | 8.00 | — | — | ||
| — | — | — | 1,09,088 | ||
| — | 400.00 | — | — | ||
| — | — | — | 48,800 | ||
| — | 200.00 | — | — | ||
| — | — | — | 71,400 | ||
| — | 280.00 | — | — | ||
| — | — | — | 6,86,560 | ||
| — | 60.00 | — | — | ||
| Supply, installation, testing and commissioning of Gate Light (LED Type) equivalent to Bajaj Model No. 160614. As per specification. | — | — | — | 3,97,980 | |
| — | — | — | 1,37,77,680 | ||
| — | 160000.00 | — | — | ||
| Supply of solar panels minimum 540 watts or above, mono crystalline / mono perchalf cut, suitable for minimum 10kWp solar system (unit Each = per watt) Warranty - The PV Modules shall be replacement warranted for minimum of 10years against all material/ manufacturing defects and workmanship. Performance warranty will be up to 25 years. As per Specification. | — | — | — | 43,20,000 | |
| — | 16.00 | — | — | ||
| Supply of hybrid inverter (suitable for 10kWp solar system and lithium-ion battery pack) with in-built safety features as per technical specification.Any reputed make,Warranty - minimum 5years. As per Specification. | — | — | — | 26,11,888 | |
| — | 16.00 | — | — | ||
| Supply & installation of Galvanised iron solar structure suitable for 10kWp solar panel installation. As per Specification. | — | — | — | 15,03,168 | |
| — | 3200.00 | — | — | ||
| Supply and fixing of Unarmoured Single Core 4 Sqmm tinned copper for DC cable supply. As per Specification. | — | — | — | 1,31,200 | |
| — | 480.00 | — | — | ||
| Supply and fixing of PVC conduit/casing caping (as per instruction of site supervisor) and its accessories, size 25mm, thickness 1.6 mm as per IS 9537 Part-III. | — | — | — | 14,880 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NIT10.pdf
ATTACHMENT
GCC2022CslipNo11.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .