RequiredExperience with Government
RequiredAnnual Turnover
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Class Room Desking/Seating ( 50 pieces ) Technical Specifications 1/6 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC TYPE OF DESKING INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK Desking Configuration TWO SEATER TWO SEATER Length of Desking
RequiredSeating and Backrest (if provided) in mm (±10 mm) 1500 1500 DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 25 mm thick prelaminated Particle Board 25 mm thick prelaminated Particle Board Material of Support Structure or Side Pannel Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm Height of Desk Top in mm (±5 mm) 750 750 Width of Desk Top in mm (± 5 mm) 400 400 SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 25 mm thick prelaminated Particle Board 25 mm thick prelaminated Particle Board Material of Support Structure Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm Material of Seat Cushion WITHOUT CUSHION WITHOUT CUSHION Width of Seating in mm (±10 mm) 500 500 Height of Seat in mm (±10 mm) 550 550 Width of backrest if provided in mm (± 5 mm) 300 300 Back Support for Seating of Same materail as Seating Provided without cushion Provided without cushion 2/6 MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1
Required2
Required3
Required4
Required5
Required6
Required7
Required8
Required9
Required10) YES * Colour of finish As per buyer's choice * Desk top finishing All sides Edge to be banded with PVC tape of 2 mm thick with help of hot melt glue * Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) 320 * WARRANTY Warranty period in number of years 3 3 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.