Construction of Gas Bank and plant room by way of earth work, Brick work , Cement concrete work and finishing work etc, at District Hospital Shopian

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All kinds of soil

Bricks work with common burnt clay F.P.S (non modular) bricks of class desi- 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 :6(1 cement : 6 coarse sand) including cost of sand and bricks scaffolding but excluding cost of cement

Dry Random rubble masonry with hard stone in underground work in soakage pits below plinth level , including providing of lap stones

Application of internal cement sand plaster of thickness 20mm(under coat 15mm and finishing coat 5mm) with a cement sand mortar of mix 1:6 including scaffolding curing and including cost of ,sand.but excluding cost of cement

Application of External cement sand plaster of thickness 15mmwith a cement sand mortar of mix 1:6 including scaffolding curing and including cost of ,sand.but excluding cost of cement

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size.including scaffolding curing and including cost of ,sand.aggregate but excluding cost of cement .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2 :4 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size. .including scaffolding curing and including cost of ,sand.aggregate but excluding cost of cement .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3 :6 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size including scaffolding curing and including cost of ,sand.aggregate but excluding cost of cement .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4 :8 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size including scaffolding curing and including cost of ,sand.aggregate but excluding cost of cement .

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete including cost of ,sand. but excluding cost of cement

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete

Providing and fixing of first class Kailwood glazed shutters 35mm thick for windows and clerestory windows, bright finished of required size with necessery screws, using glass pans 4mm thick (10 kg/sqm) including ISI marked MS Butt Hinges75x60x3.10 mm mm with necessaryscrews.

Providing and fixing of Kailwood wire gauge shutters 35 mm thick using stainless steel grade 304 wire gauge with wire of dia 0.63 mm and average width of aperture 1.4 mm in both directions for windows and clerestory windows with necessary screws including with hinges and necessary screws : lSI marked M.S. pressed bright finished butt hinges 75x60x3.10 mm mm with necessary screws of required size

Providing and fixing of Kailwood Door shutters 35 mm thick including ISI marked MS Butt Hinges 125x90x4.00 mm with necessaryscrews excluding cost of panelling which will be paid separately.

Providing and fixing of panelling 25 to 40 mm thick of first class Kailwood in Door shutters (Area of opening for panel inserts excluding portion of inside grooves or rebates to be measured)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Applying priming coats with Metal primerWith ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Applying priming coats with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm

Providing and fixing of MILD steel Grill panels fabricated from mild steel sections(square bars,flats,ISA ETC.) inclusive electric,machinery charges,adhesives like araldite complete job.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460mm bowl depth 200mm

Labour charges for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete excluding cost of steel.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing of mild steel sheets 18 gauge in eaves boarding including scaffolding, c/o electrodes,electric and machinery charges complete job.

Providing and fixing of mild steel sheets 18 gauge in soffit work of chajjas, including scaffolding,c/o electrodes,electric and machinery charges complete job.

Suppying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 em long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thicktop cover

Extra for providing mechanical device chain crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area

Providing and fixing ball bearing for rolling shutters

12.1.5 Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m2 ( incl. of cost of GS sheets and other incidentials

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/ m2 ( incl. of cost of GS sheets and other incidentials

.Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class kail wood

Labour charges for Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.including cost of binding wire but Excluding cost of Thermo-Mechanically Treated steel bars.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Columns,Walls Pillars, Piers, Abutments, Posts and Struts

P/F of below mentioned CP fittings(Jaquar series)or equivalent including c/o screws electric and machinery charges complete job..

CP Brass Sink MIXER(jaquar/marc)

CP Brass Wall MIXER(jaquar/marc)

CP Brass Basin MIXER(jaquar/marc)

\CP Brass Bibcock(jaquar/marc)

CP Brass Angle valve(jaquar/marc)

CP Brass Nipples 15mm dia and 20 mm long

CP Brass Grating

CP Brass Soap case

CP Brass Towel Rail with CP Brackets fixed to wooden cleats with CP Brass Screws

Supply, fixing, laying and jointing of GI Pipes of Variable daimeter with fittings like Elbows, Sockets, Tee's, Clamps, Plugs within the building i/c providing of Yarn at joints, inclusive eletric and machinary charge.

15mm Dia GI Pipe(.5'inch)Medium

20mm Dia GI Pipe (.75'inch))Medium

Supply, fixing, laying and jointing of various GI pipe fittings and water controlling devices of Variable daimeter i/c providing of Yarn at joints, inclusive eledtric and machinary charge.

Ball valve (1")

Ball valve (1 1/4")

Union (1")

Union (1 1/4")

Tank nipple (1")

Tank nipple (1 1/4")

Ball cock

Providing and fixing of sintex/comfort or equivalent overhead water tanks in attics within the grid network of pipes including managing of water supply and return with with the facilities of wash out and over flow and alignment.

Providing, fixing,laying of sanitary soil and waste water PVC Prince B Pipes of variable diameter with proper alignment including jointing with solvent complete job.

160mm OD UPVC Prince B Type

110mm OD UPVC Prince B Type

75mm OD UPVC Prince B Type

Supply and fixing of below mentioned PVC fittings in the sanitary system including jointing by solvent.

4"floor trap

4" p trap

4"door bend

4"door T

4" Cowel

3" door bend

3" door Tee

3"floor trap

Providing and fixing of Builders Hardware including cost of screws.

AlUMUNIUM Aldrops 6"

AlUMUNIUM Tower Bolts 6"

AlUMUNIUM Handles 4"

AlUMUNIUM Handles 6"

AlUMUNIUM Handles 4"

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Supply, fixing, laying and jointing of insulation for various GI pipeline Using suitable foam exposed to environmental effects

Providing and fixing of water pump 1.0 H.P including starter and all accessories (compton greaves or Kirloskar make)

Providing and fixing of storage type vertical hot water heater (Geyser) with copper container ,insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable,3 pin plug top,15mm dia PVC connections at the outlet(Venus, Racold,Havells)make 50 LTR. Capacity