REPAIR AND RECANNING OF VARIOUS CHAIRS AND RE-UPHOLSTERY OF SOFA SET UNDER GE RANCHI

Amount

Removing of unserviceable/broken parts of Chair wooden bottom without damaging of other parts of chair wooden bottom, supply and fixing new parts made out of 1st class hard wood teak/shisham as shown on drg and specified and directed. (FD-285)

Rear leg of size 835x55x30mm. (FD-285)

Front leg of size 430x55x30mm.(FD-285)

Side/Front/Rear rails of size 445x65x30mm.(FD-285)

Back rest of size 405x50x15mm.(FD-285)

Stiffener of size 20 x 25mm (Side & Central one).(FD-285)

Supply and fixing with steel screw of triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair wooden bottom.(FD-285)

Tightening of all parts/joints of whole Chair wooden bottom with bamboo pins.(FD-285)

Supply and fixing in replacement of seat of size 440 x 445mm x 6mm thick plywood BWR Gde as per IS:303 to seat of chair wooden bottom with steel screw complete all as specified in drg and as specified and directed .(FD-285) (Make of Plywood:- Archidply (Gold)/ Centuryply (Sainik) / Greenply (Ecotech)/BTSP (Gold)/Samratply)

Removing of unserviceable/broken parts of Chair dining without damaging of other parts of chair dining and supply and fixing new parts made out of 1st class hard wood teak/shisham as shown on drg and specified and directed. (FD-279)

Rear leg of size 890x55x30mm. (FD-279)

Front leg of size 460x55x30mm.(FD-279)

Side/Front/Rear rails of size 440x65x30mm.(FD-279)

Back rest of size 405x45x15mm.(FD-279)

Stiffener of size 20x25mm (Side & Central one).(FD-279)

Supply and fixing with steel screw of triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair dining.(FD-279)

Tightening of all parts/joints of whole Chair dining with bamboo pins.(FD-279)

Removing of unserviceable/broken parts of Chair Writing without damaging of other parts of chair writing and supply and fixing new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-280)

Rear leg of size 890x55x30mm.(FD-280)

Front leg of size 680x55x30mm.(FD-280)

Side/Front/Rear rails of size 535 x 65x30mm.(FD-280)

Back rest of size 470x50x15mm.(FD-280)

Stiffener of size 20x25mm (Side & Central one).(FD-280)

Arms of size 520 x 60x25mm.(FD-280)

Supply and fixing with steel screw of triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair Writing.(FD-280)

Tightening of all parts/joints of whole Chair Writing with bamboo pins.(FD-280)

Removing of unserviceable/broken parts of Chair Easy without damaging of other parts of chair easy and supply and fixing new parts made out of 1st class hard wood teak/shisham as shown on drg and specified and directed. (FD-229)

Front/Rear leg of size 545x55x25mm.(FD-229)

Front/Rear stiffener of size 510 x 50 x 25mm .(FD-229)

Arms of size 610 x 65x25mm.(FD-229)

Front & back rail of seat/back of size 510x50x25mm.(FD-229)

Side rail of seat/back of size 575 x 70 x 40mm .(FD-229)

Supply and fixing in replacement of seat frame with new seat frame to chair easy of 1st class hard wood teak/shisham made to shape and size complete all as specified and shown in drg and as specified and directed .(FD-229)

All as per Srl. Item No. 4.06 here-in-before but back frame of chair easy.(FD-229)

Tightening of all parts/joints of entire Chair Easy with bamboo pins. (FD-229)

Supply and fixing with steel screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair Easy.(FD-229)

Removing of unserviceable/broken parts of Chair dining cushion without damaging of other parts of chair dining cushioned and supply and fixing new parts made out of 1st class hard wood teak/shisham as shown on drg and specified and directed. (FD/MAP-II/04)

12mm thick MR Gde Plywood seat with cushion of size 450mm x 450mm and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 350/- per RM). (FD/MAP-II/04)

Supply and fixing of tapestory cloth in replacement of old cover of chair dining cushioned. (Tapestory cloth shall be not less than Rs.350/- per RM). (FD/MAP-II/04)

Front leg of size 450x50x35mm. (FD/MAP-II/04)

Rear leg of size 950x50x35mm. (FD/MAP-II/04)

Back Vertical stripps of size 550 x 30 x15mm.(FD/MAP-II/04)

Back rest of size 450x45x25mm.(FD/MAP-II/04)

Stiffener of size 25x20mm (Side & Central one).(FD/MAP-II/04)

Side and Front rails of seat of size 450x65x25mm. (FD/MAP-II/04)

Back Rail of seat of size 450x90x25mm. (FD/MAP-II/04)

Tightening of all parts/joints of entire Chair dining cushion with bamboo pins. (FD/MAP-II/04)

Supply and fixing with steel screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair dining cushioned.(FD/MAP-II/04)

Removing the old cane from various chairs and recanning with new half round 2mm wide plastic cane (Godrej/Gwalier pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed. (FD-252, 229, 279 & 280).

Taking down and removing the old cane from seat and back of Chair Verandah and recanning with new half round 4mm wide plastic cane in oval shape with mat pattern . (Plastic cane shall be of white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed . (FD-359 & FD/MAP-II/06)

M & L for electric welding to broken old frame of chair verandah including preparation of surface and removing the unwanted welding spot all as specified and directed. (FD-359 & & FD/MAP-II/06)

Supply and fixing in replacement of unserviceable portions of frame of Chair Verandah with 19mm conduit pipe of wall thickness 1.6mm duly electric welding complete all as specified and directed . (FD-359 & FD/MAP-II/06)

Supply and fixing in replacement of unserviceable round MS bar between the front legs frame of Chair Verandah with new 10mm round MS bar duly electric welding complete all as specified and directed. (FD-359 & FD/MAP-II/06)

Taking down and removing the old tapestory cloth and unserviceable cushion/foam of old seat and back of Sofa Set 5 Seater (3+1+1), supply and fixing of new cushion/foam 32 density(50mm to 100mm thick) all as per ground requirement of sofa set and upholstory with new tapestory cloth (not less than Rs. 1250/- per RM) to sofa Set complete with four legs (woodn/PVC/Steel) all as specified and as directed. (Cushion / Foam shall be of make: Sleepwell/Kurl-on/Coir-Foam) (FD-TP)

Dismantling & re-assembling/tightening of all members/parts of charpoy G.I. Pipe carefully including removing of any type newar / nylon newar/plywood from charpoy and segregate the serviceable and unserviceable parts and stacking of serviceable parts complete as per speciifed and directed . (FD-220) (Note:- Unserviceable spares will be measured and paid separately)

Supply and fixing new long rail of G.I tubing 32mm bore medium grade duly threaded both ends all as specified and shown on drg as directed by Engr-in-Charge. (Make:-Jindal/Tata/Prakash(Surya)/ Bansal (FD-220)

Labour only short rails as made out from the unservi-ceable long rail parts under item No. 9.01 above including cutting and threading at the both ends and fixed in position complete all as per drg and specified and directed (FD-220)

Labour only leg as made out from the unserviceable short rail under item no 9.02 above including cutting and threading at one end and fixed in position complete as per drg and directed .(FD-220)

Supply and fixing only G.I elbow three way of size 32mm bore ISI mark in replacement of unserviceable elbow of Charpoy G.I Pipe (FD-220).

Supply and fixing only G.I check nut of size 6mm thick 32mm bore ISI mark in replacement of unserviceable check nut of Charpoy G.I Pipe (FD-220).

Supply and fixing in replacement of old unserviceable wooden blocks/ MS Sheet/cleat with new one made of 2nd class hard wood to legs of charpoy G.I Pipe all as specified and directed (FD-220)

Supply and fixing the ply wood 12mm thick BWR Gde, AA Type as per IS:303 on top, suitable for G.I Charpoy as shown in drg of approximate size of 1980x900mm with mild steel galvanised iron nuts and bolts of size 70mmx6mm with G.I Washer. (Nos of nuts and bolts to be used is 11 Nos) including one stiffener of length 825mm approx made out of G.I tubing 20mm bore medium grade will be welded under the Plywood top as approved by Engr-in-Charge. (Make of plywood :- Archidply(Gold)/Centuryply (Sainik)/Greenply(Ecotech)/BTSP (Gold)/Samratply and Make of G.I Pipe:- Jindal/Tata/Prakash(Surya)/Bansal(FD-220)

Material and labour for French polishing to chair wooden bottom after removing the old polish from emery paper with grinder machine and prepration of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces and provided 04 Nos nylon buffers with steel screw to legs of chair wooden bottom complete all as specified and directed . (FD-285)

All as per Srl item No 10 here-in-before but chair dinning. (FD-279)

All as per Srl item No 10 here-in-before but chair writing.(FD-280)

Material and labour for French polishing to chair Easy after removing the old polish from emery paper with grinder machine and prepration of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces and provided 04 Nos nylon buffers with steel screw to legs of chair easy complete all as specified and directed . (FD-229)

All as per Srl item No:- 13 here-in-before but chair dining cushioned. (FD/MAP-II/04).

M & L painting to frame of chair verandah with white synthetic enamel paint including preparation of surface. (after removing of the cane) and provide 04 Nos PVC shoes of white colour to legs of chair Verandah as specified and directed. (FD-359)

Material and labour for French polishing to sofa set 5 seater after removing the old polished and prepration of wooden surface by providing putty and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces complete all as directed (FD-TP)

M/s Deepak kumar sinha

M/S AJAY KUMAR SINGH