Provn of Class Room at MAC Gp and Special Repairs to Electrification on 2nd Floor of Bldg No T-201 (Right Corridor) at MIC and S under GE (S) Ahmednagar

Amount

Surface dressing n exc 15cm deep in soft/loose soil all as specified and as directed

Excavation over areas n exc 1.50m in depth and getting out in soft/ loose soil all as specified and as directed.

Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations etc. or for manholes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil all as specified and as directed.

Excavation in trenches, n exc 1.50m wide, exc 1.50m but n exc 3.0m in depth; for foundations, etc. or for manholes etc not exc 10 Sqm on plan and exc 1.5m but n exc 1.50 in depth and getting out in soft/loose soil all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick with soils all as specified and as directed.

Removing excavated soil to distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and as directed.

M&L for hardcore of broken stone/bouldders of guage n exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and as directed.

M&L for PCC, 1:4:8, type D2, using 40 mm graded stone aggregates in foundations, filling and mass concrete all as specified and as directed.

M&L for PCC, 1:3:6, type C2, using 40 mm graded stone aggregates in foundations, filling and mass concrete all as specified and as directed.

M&L for PCC, 1:2:4, type B2, using 40mm graded stone aggregates in foundations, filling and mass concrete all as specified and as directed.

M&L for PCC, 1:2:4, type B1, using 20mm graded stone aggregates as in roof kerbs or mud stops etc including rounded or chamfered angles all as specified and as directed.

M&L for PCC, 1:2:4, type B1, using 20 mm graded stone aggregates as in cills, steps, parapets, coping, bed plates, etc including weathering, slightly rounded or chamfered angles with and including necessary form work all as specified and as directed.

M&L for RCC M-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as specified and as directed.

M&L for RCC M-25 design mix as in columns, pillars, piers, posts and struts all as specified and as directed.

M&L for RCC M-25 design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

M&L for RCC M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5m span all as specified and as directed.

M&L for RCC M-25 design mix as in chajjas all as specified and as directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete all as specified and as directed.

Use & waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and as directed.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete all as specified and as directed.

Use & waste of formwork to sides of slabs and similar work; exc 10cm but not exc 20cm wide for rough finished flat surfaces of concrete all as specified and as directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete all as specified and as directed.

Use & waste of formwork to soffits and sides of chajjas and similar work; for rough finished flat surfaces of concrete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for mild steel TMT bars 5mm dia and over and including 10 mm dia in stirups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

S&F powder coated aluminium door with frame and shutter in two panels (top and bottom) made out of aluminium sections (make Jindal or equivalent) including 5 mm thick sheet glass, aluminium cleats, rubber/ neoprene beading, all necessary fittings and locking arrangements etcall as specified and as directed and comprises of following sections :- (a) Vertical style- 47 x 44.5 x 2.25 mm thick @ 1.15 Kg/m (Min) (b) Lock rail- 114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (c) Bottom rail-114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (d) Frame-47.5 x 44.45 x 2.25 mm thick @ 1.12 Kg/m (Min)

S&F powder coated aluminum windows, three track, made out of aluminium sections (make Jindal or equivalent) including all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprises of following sections :- (a) Window frame (i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Size - 20672 (Wt not less than 0.594 Kg/m) (b) Shutter (i) Vertical (end)- 20669 (Wt not less than 0.481 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)

M&L for water proofing treatment to RCC roof slab, parapet, chajja etc comprising with the following treatment/specification from bottom to top (i) Screed bed or bedding layer of 10 mm thick cement mortar 1:3 with mixing of WPC @ 3% by weight of cement, finished even and smooth without using extra cement (ii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986. (iii) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (iv) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm. Note: Water proofing compount will be measured & paid seperatly.

Supply only water proofing compound, ISI mark as aproved by GE all as specified and as directed.

M&L for 100mm thick cement concrete 1:4:8, type D2, using 40 mm graded stone aggregates as in sub base all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L 18 to 20mm thick prepolished granite stone slab of approved shade and colour Jet Black / Telephone Black as in table top, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, including full round moulding the edges, laid over and including screed bed 15mm thick in cement mortar 1:4, jointing, pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and as directed.

M&L for vitrified colour ceramic tiles 10mm thick, (Square or rectangular) area of each tile not exceeding 0.36 sqm, as in floors etc. laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

All as per serial item No 36 but in dado/skirting or on vertical surfaces laid over and including 10mm thick backing coat in cement mortar 1:4.

M&L for 60mm thick, factory made, chamfered edge, cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, lawns, drive ways or light traffic, parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; etc complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete sur-faces finished even and smooth with thin layer of sagol complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces in two coats, first coat of 10mm thick in cement mortar 1:4 finished rough to receive second coat and second coat of 5mm thick mixed with water proofing compound as per Manufacturers instructions, finished surfaces even and fair all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces as in ceiling, finished surfaces even and smooth without using extra cement all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening over a coat of 1.50mm thick (Average thickness) putty, finished smooth all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash all as specified and as directed

M&L for preparation of new plastered surfaces of walls applying two coats of cement base paint over a coat of primer all as specified and as directed

S&F aluminium powder coated, decorative type curtain rod, 20mm dia, complete all as specified and as directed.

S&F aluminium powder coated decorative brackets, suitable for 20mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DBs ) & making good of disturbed surfaces of wall/floors etc as specified and as directed.

M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc all as specified and as directed for one light point or one fan point controlled by one, one way switch. NOTES:- 1. Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW, BLUE for Earth-Green and Neutral- Black) 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc. 3.Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

All as per serial item No. 48 but one 5 Amp 5 pin socket outlet point on same board with other switches including earth wire all as specified and as directed.

All as per serial item No. 48 but with 2.5 Sqmm PVC copper stranded cable FRLS type for phase, neutral and earth for one 15 Amp 6 pin socket on independent board all as specified and as directed.

All as per serial item No. 48 but with 4 Sqmm PVC copper stranded cable FRLS type for phase, Neutral and earth for one Plug socket on independent board all as specified and as directed.

All as per serial item No. 48 but on independent board all as specified and as directed.

All as per serial item No. 48 but one light point controlled by 2 way switches all as specified and as directed.

All as per serial item No. 48 but one bell/buzzer point controlled by one push button on the same board with other switches or independent all as specified and as directed.

M&L point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neuatral single core multistranded copper conductor cable of 1100 Volts grade PVC insulated and unsheathed , FRLS cable drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc as specified and as directed for One light point and one fan point controlled by one, one way switch. NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2. All points shall be earthed up to fixtures i.e holdrs,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.

All as per serial item No. 55 but one 5 Amp 5 pin socket outlet point on same board with other switches including earth wire all as specified and as directed.

All as per serial item No. 55 but with 2.5 Sqmm PVC copper stranded cable FRLS type for phase,Neutral and earth for one 15 Amp 6 pin socket on independent board all as specified and as directed.

All as per serial item No. 55 but on independent board all as specified and as directed all as specified and as directed.

S&F switch piano, flush button, 5 Amp, single pole, one way, 230 volts, white finish, all as specified and as directed.

S&F socket outlet, flush type, 5 pin, 6 Amp, multipurpose, 230 volts, single pole, one way suitable for 3 pin/2pin, 5 Amp plug top white /ivory finish all as specified and as directed.

S&F switch socket combination, flush type, 5 pin, 6 Amp, multipurpose, 230 volts, single pole, one way, suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified and as directed.

S&F switch socket combination, multipurpose, flush type, 2 in 1 type (6 pin ) 6/16 Amps, 230V, AC all as specified and as directed.

S&F lamp holder, angle/ batten type, PVC/Polycarbonate type with back plate, suitable for batten fittings all as specified and as directed.

S&F ceiling rose, surface PVC 50mm dia, 3 terminals including PVC mounting block white/ivory finish all as specified and as directed.

S&F bell push, flush type, 5 Amp, single pole, 230 volts, white finish all as specified and as directed.

S&F switch piano, flush button, 5 Amp, single pole, 2 way, 230 volts, white finish all as specified and as directed.

S&F fan regulator, step type, electronic on existing phenolic laminated sheet, 5 step, socket type, 230 volts, 450 watts, suitable for ceiling fan 1200/1400mm sweep all as specified and as directed.

S&F bell, AC, 230 volts, single phase complete all as specified and as directed.

S&F square profile LED lighting fixture with extruded polycorbonate, environmental friendly, energy efficient ready to use pack LED tube light fitting 20 Watt with LED light source 6500k with uniform light output, with all accessories including its connection with 3 core sheathed copper conductor cable of size 0.5 sqmm with complete with all as specified and as directed. Make: HAVELLS LED PRIDE ESSENTIAL Cat No LHEXAWP71N1W020 or equivalent makes CG /Philips /wipro /Jaguar /Shakti/Luker.

S&F in repairs, 600 mm x 600 mm size, recess mounted LED luminaire of capacity 36 watt, with driver, for soft glare free light, AC 230 volt complete with all acessories and connections, complete all as specified and as directed. Make :- Philips / Jaquar/ Crompton/ Halonix/ Century LED/ Wipro /GE /Havells /Shakti/Luker

S&F in repairs, 210 mm x 210 mm size, flat panel square fixture, slim, compact, aluminium die cast lit panel, recess mounting 1 x 18 watt, 230 volt with opal diffuser and sepatate electronic driver, LED light source 6500K with uniform light output, with all accessories including three core copper cable 23/0.0076 from ceiling rose to light fittings complete all as specified and as directed. Make :- Havells Cat Part No OCTANE LED PANEL SQUARE Item Code LHEBAEP7IZ1W018 or equivalent model of make Philips / Jaquar/ Crompton/ Halonix/ Century LED/ Wipro /GE/ Shakti /Luker

S&F in repairs, ultra modern, recess com surface panel, luminaire with driver suitable for amstrong / grid ceiling (cutout (60-185) mm, height 14 mm) MS housing with high brightness LEDs fixture capacity 18 watt, LED light source 6500K with uniform light output with all accessories including three core copper cable 23/0.0076 from ceiling rose to light fittings, complete all as specified & as directed. Make: Havells Cat No TRIM CLIPON LED PANEL SQUARE LHEAABP7IN1W018 or equivalent model of make Philips / Jaquar/ Crompton/ Halonix/ Century LED/ Wipro/GE/Shakti/ Luker

S&F in repairs, 600 mm x 600 mm x 70 mm size, 42 watt LEDs luminaire fixture, with driver, ultra modern, surface mounting, suitable for amstrong / grid ceiling in MS housing with high brightness, prewired, including connections from ceiling rose to light fittings, complete all as specified and as directed.

M&L in replacement submain wiring with two single core PVC insulated unsheathed, multistranded flexible FRLS copper conductor 1100Volts grade cables 10 Sqmm drawn through in and including PVC heavy duty surface casing caping including 10 Sqmm 1100Volts grade PVC insulated unsheathed multi stranded flexible FRLS copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. NOTES: 1.Proper colour coding shall adopted for wiring (for phase-RED,YELLOW, BLUE for Earth- Green and Neutral - Black) 2. Two run of 10 sq.mm for one run for phase,one run for neutral with one run of10 sqmm cable for earth and one run of PVC casing & caping shall be measured as one unit.

M & L in replacement submain wirng with two single core PVC insulated unsheathed, multistranded flexible FRLS copper conductor 1100Volts grade cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 6 Sqmm 1100Volts grade PVC insulated unsheathed multi stranded flexible FRLS copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. NOTE: 1.Proper colour coding shall adopted for wiring (for phas-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2.Two run of 6 sq.mm for one run for phase,one run for neutral with one run of 6 sqmm cable for earth and one run of PVC casing & caping shall be measured as one unit.

M&L for submain wirng with two single core PVC insulated unsheathed, multistranded flexible FRLS copper conductor 1100Volts grade cables 4 Sqmm drawn through in and including PVC heavy duty surface casing caping including 4 Sqmm 1100Volts grade PVC insulated unsheathed multi stranded flexible FRLS copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & as directed. NOTE: 1. Proper colour coding shall adopted for wiring (for phase-RED,YELLOW, BLUE for Earth-Green and Neutral- Black) 2. Two run of 4 sq.mm for one run for phase,one run for neutral with one run of 4 sqmm cable for earth and one run of PVC casing & caping shall be measured as one unit.

S&F sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified and as directed.

S&F in replacement sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified and as directed.

S&F MCB SP, AC 240 V, 6 to 32 Amps 10 KA capacity ,'C' series making connection with suitable size of copper lugs etc complete all as specified and as directed

S&F in replacement MCB SP, AC 240 V, 6 to 32 Amps 10 KA capacity ,'C' series making connection with suitable size of copper lugs etc complete all as specified and as directed

S&F in repairs, MCB SPN, AC 240 V, 6 to 32 Amps, 10 KA capacity ,'C' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F MCB SPN, AC 240 V, 40 to 63 Amps 10 KA capacity ,'C' series making connection with suitable size of copper lugs etc complete all as specified and as directed

S&F sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 12 way protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with neutral bar, earth bar and cable alley for cable managment, fully shrouded, neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in replacement sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 8 way protection class IP-42,suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting with 100 Amps rated copper busbar with neutral bar, earth bar and cable alley for cable managment, fully shrouded, neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in replacement sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) tripple pole and neutral 240 volts 4 way protection class IP-42,suitabl for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar with neutral bar, earthbar and cable alley for cable managment, fully shrouded, neutral bars, prefittes masking sheet complete all as specified and as directed

S&F factory made powder coated sheet metal enclosure, TPN Vertical Distribution Boards with MCCB four pole 16 KA, 100 Amp with fixed thermal and magnetic settings as incomer IP43 protection Double Door : Plain 4 way with suitable rated busbar,neutral link, and MCB SP 40 Amp-8 Nos as outgoings complete all as specified and directed.

S&F in repairs ISOLATOR TPN, AC 415 V, 63 amps, 10 KA capacity ,'C' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in replacement 100 mm x 50 mm size PVC casing caping and fixing accessories complete such as lock nuts, saddles, hook etc of adequate size complete all as specified and as directed (For replacement of existing damaged casing capings)

S&F security light of building with single piece new generation energy savng and environmental friendly long life LED 35W made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of light grade GI Pipe 25 mm dia 1.5 mtr long fixed to wall/ pole with two clams made out of mild steel flat iron 40 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm aluminim cable all as directed and as specified.

S&F 1200mm sweep ceiling fans complete with blades, down rod, electronic regulator and accessories, 230 V, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with fan Regulator including electric connection complete all as specified and as directed

Supply and lay HDPE PIPE (PE 100,SDR-21,6 Kgf/Cm^2) IS 4984-2016) 63 mm dia for laying of LTcables etc complete with all accessories all as specified and directed.Make:Vectus industries/Supreme/Infra/Astron Plastic.

Supply and laying in trenches/ducts/ fixing on pole/structure of 1100 Volts grade heavy duty LT UG cable, 3.5 core 70 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, Armoured with galvanised steel wire or tape and overall sheathed including cable gland, lug, jointing material etc, jointing, connecting , testing and commissioning all as specified and directed. Note: laying testing and connection with suitable glands,lugs etc is deemed to be included in the quoted rates.

M&L earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI wire 4 mm dia, by means nut bolt, nuts, check nuts and washer of the GI. Earth wire connected upto main earth point/DBs alongwith 15mm dia incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion” all as specified and as directed.

M/s Meher Construction

NATHKRUPA CONSTRUCTION

R. T. Saluji

S.k ENTERPRISES

Ms. M.D. Auty

DAKSH ENGINEERS AND BUILDERS

M/s. A P INFRA

M/s. Chhtrapati Construction(Propa. Lokesh Anant Salunke)