Construction of PG Block in Govt. Degree College Chamba (SH Construction of 3rd and 4th floor including , and W.S. and S.I. )

Amount

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including all taxes ,GST, carriage of material within all leads and lifts and other incidentals or as per the direction of the engineer-in -charge .

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including all taxes ,GST, carriage of material within all leads and lifts and other incidentals or as per the direction of the engineer-in -charge .

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness including all taxes ,GST, carriage of material within all leads and lifts and other incidentals or per the direction of the engineer-in -charge .

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landing including all taxes ,GST, carriage of material within all leads and lifts and other incidentals or as per the direction of the engineer-in -charge .

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and heights including all taxes ,GST, carriage of material within all leads and lifts and other incidentals or as per the direction of the engineer-in -charge .

Providing and laying in position machine batched and machine mixed machine mix cement concrete of M-20 ( M-twenty ) design mix to be obtain the compressive of 20/ square mm (twenty newton per square millimetres) for reinforced cement concrete work, with cement content not less than 320 KG/Cum (three hundred twenty kilogram per cubic metre). or as per approve design mix for all work above plinth level up to all floor level to give a smooth surface mechanically mixed and vibrated including curing compete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work work within all lead and lift of materials and other incidentals as per approved sepecification ,drawing ,design and as per direction by engineer-in -charge .The rate is inclusive of octroi , royality ,Malkhana ,toll tax, GST and all type of other taxes imposed by the Government.

25 mm (twenty five millimetre) thick and 10 cm (ten centimetre) wide plain cement mortar raised band in cement mortar 1:4 ( one cement :four sand) curing complete , approved drawing ,design and specifications including all taxes, GST, carriage of material within all leads and lifts and other incidentalsas per the direction of the engineer-in -charge .

Providing tor steel TATA Tiscon /Sail reinforcement for reinforced cement concrete work including straightening, bending, binding and placing in position complete as per approved drawing ,design ,specification and directions of the Engineer-in-charge including all taxes,GST, carriage of material, within all leads and lifts and other incidentals.

Second class brick work using common brunt clay building bricks of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:6 (one cement isto six sand) curing complete including all taxes, GST,within all leads and lifts and other incidental or as per the direction of the Engineer-in-charge .

Half brick masonry using second class common brunt building brick of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:4 (one cement isto four sand) curing complete including all taxes,GST, and as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing factory made 35mm (Thirty five millimetre) thick commercial i.e. non decortative phenol bounded of block board construction with full frame of 1st class hard wood well match commercial three ply veneer with vertical grain or cross band and flush door ISI marked No. 2202 of century ply boards (1) LTD Kit/ Ply including black enamelled MS butt hinges including all taxes,GST, and as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing 35mm (Thirty five millimetre) thick phenol bonded flush door shutter ISI marked No, 2202 of kit ply or equivalent with 1mm (one millimetre) thick PGI sheet lining on one side including bright finished black enamelled iron hinges with necessary screws of approved drawing ,design and specification including all taxes,GST, and as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing 19mm (Nineteen millimetre) thick commercial water proof board of shutter for cup board Uniply/Greenply/Kitply/Centuary ply including shelves and 6 mm ( six millimetre) thick ply back side of cupboard. All cut portion of shutter shall have 6 mm ( six millimetre) thick hard wood edging. The shutter from out side shall to be finished with 1 mm (one millimetre) thick lamination of Centuary ply/Greenply/ Action Tesa i/c fixing with nickel plated piano hinges with screws of approved drawing ,design and specification including within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimetre) thick wooden panelling of second class deodar wood fixed on batten of size 40x62 mm and top with hard wood edging complete including hard wood adging exposed edges of boards within all leads, lifts and other incidentals or as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete 300x16 mm (Three hundred into sixteen millimetre) including all taxes, GST, carriage of materials within all leads, lifts and othe incidentals approved drawing ,desidn and as per specification or as per the direction of the Engineer-in-charge .

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete 250x16 mm (two hundred fifty into sixteen millimetre) including all taxes,GST, carriage of materials within all leads, lifts and othe incidentals approved drawing ,desidn and as per specification or as per the direction of the Engineer-in-charge .

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre) including all taxes,GST, carriage of materials within all leads, lifts and othe incidentals approved drawing ,desidn and as per specification or as per the direction of the Engineer-in-charge .

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) including all taxes,GST, carriage of materials within all leads, lifts and othe incidentals approved drawing ,desidn and as per specification or as per the direction of the Engineer-in-charge .

Providing and fixing M.S. plain grills made of 8mm (Eight millimetre ) M.S. square bars welded to 6mm x12mm MS( six millimetre into twelve millimetre ) flat distance between should not be more than 150mm centre to centre of total grill should be to windows frame with screws including all taxes ,GST, and carriage of materials within all leads, lifts and othe incidentals approved drawing ,desidn and as per specification or as per the direction of the Engineer-in-charge .

Providing and fixing 6 mm thick Everst (Six millimetre ) board ceiling in of size 595x595mm( five hundreds ninety five into five hundred ninety five millimetre) cascade in powder coated G.I. frame work as per detail including all taxes,GST, and carriage of materials within all leads, lifts and othe incidentals approved drawing ,design and as per specification or as per the direction of the Engineer-in-charge .

Providing and fixing aerolite armstrong tile ceiling of size 60x60 cm( Sixty centimetre into sixty centimetre) ,50% (fifty percent )prefarated and 50% (fifty percent )plain tiles in combination over power coated GI frame as per pattern with 12 mm (twelve millimetre ) thick and 80mm (eighty millimetre )wide Rai wood boarder including all taxes,GST, and carriage of materials within all leads, lifts and othe incidentals approved drawing ,desidn and as per specification or as per the direction of the Engineer-in-charge .

Providing and fixing 12mm (Twelve millimetre) thick Pre-laminated phenol bounded exterior / ISI marked with suide black board shall be provided including all taxes,GST, and carriage of materials within all leads, lifts and othe incidentals approved drawing ,design and as per specification or as per the direction of the Engineer-in-charge .

Providing and fixing steel Almirah Godrej having size 0.90x2.00x.045 m (zero point ninezero into two point zero into zero point four five metre) M.S. steel almirah having five partitions ,one safe including locking arrangment of Godrej/Wipro/store/Neel Kamal complete including all taxes,GST, and carriage of materials within all leads, lifts and othe incidentals, approved drawing ,design and as per specification or as per the direction of the Engineer-in-charge .

Prokviding and fixing 65mm x35mm (sixty five millimetre into thirty five millimetre ) special quality bright finished brass cup board locks or wardrobe locks with six levers including necessary screws etcetra complete including all taxes ,GST, and carriage of materials within all leads, lifts other incidentals. as per specification approved drawing ,design or as per the direction of the Engineer-in-charge .

providing and laying mirror polished 25mm (twenty five millimetre) thick kota stone flooring of 55 X 55centimetre size( fifty five centimetre into fifty five centimetre ) laid over 20mm (twenty millimetre) thick base of cement mortar 1:4 (one cement isto four sand) including Jaislemer yellow marble band 7.5 cm. (seven point five centimetre ) wide and jointed with grey cement slurry mixed with pigment to match the shade of kota stone including rubbing, curing and polishing complete including all taxes,GST, and carriage of materials within all leads, lifts and othe incidentals approved drawing ,design and as per specification or as per the direction of the Engineer-in-charge .

providing and laying 25mm (Twenty five millimetre) thick kota stone flooring of 55 X 55centimetre size( fifty five centimetre into fifty five centimetre ) laid over 20mm (twenty millimetre) thick base of cement mortar 1:4 (one cement isto four sand) including Jaislemer yellow marble band 7.5 cm. (seven point five centimetre ) wide and jointed with grey cement slurry mixed with pigment to match the shade of kota stone including rubbing, curing and polishing complete including all taxes,GST, and carriage of materials within all leads, lifts and othe incidentals approved drawing ,design and as per specification or as per the direction of the Engineer-in-charge .

providing and laying mirror polished 25mm (twenty five millimetre) thick kota stone single slab in treads of steps having round nosing laid over 20mm (twenty millimetre) thick base of cement mortar 1:4 (one cement isto four sand) including Jaislemer yellow marble band 7.5 cm. (seven point five centimetre ) wide and jointed with grey cement slurry mixed with pigment to match the shade of kota stone including rubbing, curing and polishing complete including all taxes,GST, and carriage of materials within all leads, lifts and othe incidentals approved drawing ,design and as per specification or as per the direction of the Engineer-in-charge .

providing and laying mirror polished 25mm (twenty five millimetre) thick kota stone single slab in skiriting of steps laid over 20mm (twenty millimetre) thick base of cement mortar 1:3 (one cement isto three sand) including Jaislemer yellow marble band 7.5 cm. (seven point five centimetre ) wide and jointed with grey cement slurry mixed with pigment to match the shade of kota stone including rubbing, curing and polishing complete including all taxes,GST, and carriage of materials within all leads, lifts and othe incidentals approved drawing ,design and as per specification or as per the direction of the Engineer-in-charge .

Providing and fixing 10mm (ten millimetre) thick ani skid water proof stain and impect resistent heavy duty vetrified tiles Kajaria /Jonson Nitco / orient -bell 600mm X 600mm X 10mm (six hundred millimetre into six hundred millimetre into ten millimetre) manufactured of aprroved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required with curing complete including all taxes, GST, carriage of material, within all leads ,lifts and other incidentals or as per specification ,approved drawing ,design or per the direction of the engineer-in-chief and

Providing and fixing 2mm (two millimetre )thick PVC heavy duty antistatic venyl Flooring plain or coloured, carbed or mosaic/metalledfinish laid with approved adhesive on sub-floor including all taxes, GST, carriage of material, within all leads ,lifts and other incidentals or as per specification ,approved drawing ,design or per the direction of the engineer-in-chief and

White glazed tiles 300x450mm ( Three hundred millimetre into four hundred fifty millimetre ) of Kajaria /Jonson Nitco / orient -bell 6mm (six millimetre) thick in skirting risers of steps and dado 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry including all taxes, GST, carriage of material, within all leads ,lifts and other incidentals or as per specification ,approved drawing ,design or per the direction of the engineer-in-chief and

Providing and laying vibro hydraulic compressed and polished precast terrazo tiles 25mm (twenty five millimetre) thick of 300mm X 300mm (three hundred millimetre into thre hundred millimetre) of NTC or equivalent ISI marked No. 1237 in 70% (seventy percent) white cement and 30% (thirty percent) grey cement with marble chips ratio of 55% (fifty five percent) white and 15% (fifteen percent) each of dark green, yellow and maroon shade of specified sizes having chips size 0,B and 2B in Ratio of 50%, 25%, 25% laid in floors, treads of steps and landings on a bed of 25mm (twenty five millimetre) average thicknes of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing , curing and polishing complete including all taxes, GST ,carriage of material within all leads , lifts and other incidentals specification or as per the direction of the engineer-in-charge .

Providing and laying vibro hydraulic compressed and polished precast terrazo tiles 25mm (twentyfive millimetre) thick of size of NTC or equivalent ISI marked No. 1237 in 70% (seventy percent) white cement and 30% (thirty percent) grey cement with marble chips ratio of 55% (fifty five percent) white cement and 15% (fifteen percent) each of dark green, yellow and maroon shade with marble chips of specified having chips sizes 0,B,2B in skirting and risers of steps in the ratio of 50% , 25% , 25% on 10mm (ten millimetre) thick cement plaster 1:3 (one cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing , curing and polishing complete including all taxes, GST ,carriage of material within all leads , lifts and other incidentals specification or as per the direction of the engineer-in-charge .

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheets of TATA Dura-shine /Reliance/ Jindal steel of approved shade in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating and back coat of polyster of 10 microns (ten micron) over 5 microns (five micron) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required as per specification ,approved drawing ,design and as directed by engineer-in-Charge including complete including all taxes, GST ,carriage of material within all leads , lifts and other incidentals specification or as per the direction of the engineer-in-charge .

Providing and fixing as factory made having proper gola shape ridges or hips TATA Durashine /Sail/Reliance /Jindal 60cm (sixty centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing having proper gola shape with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five microns) primer coating and back coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required including all taxes, GST, carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-Charge .

Providing and fixing valley 90 cm. (ninety centimetre) overall with 0.60mm (zero decimal six millimetre) thick prepainted steel sheets in roofing of TATA Durashine/Sail/Reliance /Jindal with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron primer coating and back coat of poltster of 5 micron over 5 micron primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia and prepainted G.I. limpet and bitumen washers complete with all accessories including all taxes, GST, carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-Charge

Providing and fixing polycarbonatd tranparent sheet 10 mm (ten millimetre )thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer complete within all lead , lifts and other incidentals or as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 30 cm (thirty centimetre) wide 25cm (twenty five centimetre) overall semicircular plain 0.63mm (zero point six three millimetre) thick G.I. sheet gutter fixed with bolts and nuts and washers etcetera conplete including making necessary conections with rain water pipe complete as per design within all lead , lifts and other incidentals or as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet 2.00mm (two millimetre) thickness in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per specification within all lead , lifts and other incidentals or as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Structural Steel work of TATA /Sail welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in trusses and trusses purlins in building within all lead , lifts and other incidentals or as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing steel door, windows, ventilaters and clerestory windows frame manufactured from M.S. channal 75x40mm (Seventy five into forty millimetre) , size of ISLC vertically welded with M.S. flat 75mm X 4mm (Seventy five millimetre into four millimetre) for central frames with split to end tail to each jambs including joints and miterd and welded with 16 X 3.15mm (Sixteen into three point five millimetre) lugs 10cm (ten centimetre) long embedded in cement concrete block 15cm X 10cm X 10cm (Fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate twenty millimetre nominal size) with provision for locking arragnement and shock observor fixed with by mechanical means lugs and curing complete including applying a coat of approved steel primer after pretreatment of the surface as specified as per specification including all lead , lifts and other incidentals or as per the direction of the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing steel side hung glazed door windows and ventilators of standard rolled steel sections steel joints mitred and welded with 16x3.15mm ( sixteen into three point fifteen millimetre) 10cm (Ten centimetre) lugs embedded in cement concrete block 15cmx10cmx10cm. (fifteen centimetre into ten centimetre into ten centimetre) size of cement concrete 1:3:6 (one cement isto three sand isto six stone aggregate 20mm nominal size) or with wooden plugs and srews or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting including providing and fixing of 5mm thick glass panes of Modi Guard with glazed clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint in fixed steel windows ncluding all lead , lifts and other incidentals or as per the direction of the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing steel glazed fixed hungs door windows and ventilators of standard rolled steel sections steel joints mitred and welded with 16x3.15mm ( sixteel into three point fifteen millimetre) 10 cm (tem centimetre ) lugs emabded in cement concrete block 15cm x10cm x10cm. (fifteen centimetre into ten centimetre into ten centimetre) size of cement concrete 1:3:6 (one cement isto three sand isto six stone aggregate 20mm nominal size) or with wooden plugs and srews or rawl plugs and screws or with fining clips or with bolts and nuts as required and iron fitting including providing and fixing 5mm thick glass panes of Modi guard with glazed clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint in top hung windows windows including all lead , lifts and other incidentals or as per the direction of the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing wire gauge shutter standard in Z-Section using galvainsed MS wire gauge of IS guage designation 85 (eighty five) wire of 0.56 mm (Zero point five six millimetre ) for door and windows and M.S. fitting as required including providing and fixing of projecting, hinges, tower bolts, handles, hooks and eyes, presty, locking arrangment spring catch etcetra and providing and fixing wire mesh fly proof including fixing with special metal sesh putty of approved make complete including applying a priming coat of red lead paint including all lead , lifts and other incidentals or as per the direction of the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Steel work TATA/ SAIL welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in gratings framed gaurd bars, ladders, railing, brackets and similar works including all lead , lifts and other incidentals or as per the direction of the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing hard wood hand rail of 75mm x65mm (seventy five millimetre into sixty five millimetre) including 19x19mm (nineteen into nineteen millimetre) square bars balusters connected by digonal bars 12x12mm (twelve millimetre into twelve millimetre) square bars with M.S. flat 40mm x6mm (forty millimetre into six millimetre) fixed to treads of stairs with Deodar wood hand rail of 75mm x65mm (Seventy five millimetre into sixty five millimetre) complete including all lead , lifts and other incidentals or as per the direction of the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Applying priming two or more coats over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink ASIAN/ NEROLAC including all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat ) on new wood and wood based surfaces with enamel paint of asian / nerolac to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than white including all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of Asian / Nerolac brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with enamel paint other than white including all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Polishing two or more coats with malamine polish of required ASIAN /NEROLAC shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete including all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Finishing walls with water proof cement paint /Apex exterior grade of exterior of approved design Apex exterior of Alek exterior of Asian paints as per approved shade on undecorated wall surface (two or more coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( one cement isto six sand) as per the directions of the Engineer-in-charge including all taxes ,GST, carriage of material within all leads and lifts and other incidentals.

15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles in girth and finished even and smooth with cement mortar 1:5 (one cement isto five sand) as per the directions of the Engineer-in-charge including all taxes ,GST, carriage of material within all leads and lifts and other incidentals.

15mm (fifteen millimetre) cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including all taxes ,GST, carriage of material within all leads and lifts and other incidentals.

15 mm (fifteen millimetre) cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including all taxes ,GST, carriage of material within all leads and lifts and other incidentals.

Painting two or more coats with sythentic enamel paint (excluding priming coat ) on wall surfaces concrete / masonary / asbestos cement / plaster surfaces with synthetic enamel paint of Nerolac/ Asian to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than white including all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Wall painting two or more coats with acrylic emulsion paint of ASIAN /NEROLAC shade design approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Governme

Distempering two or more coats with oil bound washable distemper of Asian / Nerolac approved brand and manufacture and of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and including preparing the surface even and sand papered smooth as per the directions of the Engineer-in-charge including all taxes ,GST, carriage of material within all leads , lifts and other incidentals.

Providing water proofing treatment shall be done in two coats apply first coat of Dr. Fixit torch shield (P-3160-3mm ) to the clean and saturated surface maintaining a coverage 0.60 sqm. (point six zero square meter ) per kilogram to achieve 1 mm (one millimeter ) thickness coating shall also be executed up tp 300 mm (Three hundred millimetre) and second coat shall be applied in opposite direction after 4 to 6 hours of application of first coat dist coat then sprinkle sand on top surface of applied Dr. Fixit rast flax white still tacky and second coats then apply cement mortar 1:4(one cement :four sand ) mixed with pidi proof laid at the rate 200 ml (two hundred millimeter ) per kilogram of cement over the floor with suitable gradient to words drain water pipe while the second coat of Dr. Fixit is still tacky complete as per approved drawing design including preparing the surface even and sand papered smooth as per the directions of the Engineer-in-charge including all taxes ,GST, carriage of material within all leads and lifts ,other incidentals.

Providing and fixing on wall faces PVC (D-plast) 100mm dia (one hundred millimetre diametre) rain water pipes of Finolex/Superme/Vectus Q4 MPA working pressure not less than 4.5 Kg (four point five) kilogram per square metre including filling the joints with approved adhesive complete all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-plast) 100mm (one hundred millimetre) dia PVC single equal branch for rain water pipes of Finolex/Superme/Vectus including filling the joints with approved adhesive complete all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing of expansion joint system related with wall joint (internal / external) loaction as per drawing and direction of Engineer-in-Charge. The joint shall be filled up with polysterence back or rod bars members shelf alinging / centering arrangement and supports. The material shall be such that it provide an expansion joints system suitable for vertical wall to wall / wall to corners application between new and exising construction in office building and complexes with no slipping down tendency amongest the components of joints system in the shall be utlilized light weight polysterence back or rod surfaces mechanically snap locking the multicellular to facilitate movement all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 1620 (20 mm OD) Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra with clamps at 1.00 (one metre) spacing. This includes the costs of cutting chases and including testing of joints Concealed work, including cutting chases and making good the wall etcetera complete as per specification directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and other taxes imposed by the Government.

1620 (20mm OD) pipe

2025(25 mm OD) pipe

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor 15 mm (fifteen millimetre) nominal bore including all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and placing in position 1000 (one thousand) litres net capacity PVC water storage tank of ISI 12701 marked of Finolex /Superme /Prince G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting upto all heights above ground level all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket of supreme make , waste and ventilating pipes ISI marked Finolex /Superme /Prince including fixing with approved adhesive 150 mm (one hundred fifty millimetre) dia as all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket of supreme make , waste and ventilating pipes ISI marked Finolex /Superme /Prince including fixing with approved adhesive 110 mm (one hundred ten millimetre) dia as per the directions of the Engineer-in-charge including all taxes ,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing PVC 110mm x90mm (one hundred ten millimetre into ninety millimetre) dia floor trap of Finolex/Supreme/Prince ISI Marked of self cleaning design including fixing with approved adhsive, cost of cutting making the walls and floors etc. complete including all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC single equal branch plain Finolex /Superme /Prince ISI marked including fixing with approved adhesive 150 mm (one hundred fifty millimetre) dia all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC single equal branch plain ISI marked Finolex /Superme /Prince including fixing with approved adhesive 110 mm (one hundred ten millimetre) dia all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying PVC plain bend of ISI marked Finolex /Superme /Prince including fixing with approved adhesive etc. complete 150 mm (one hundred fifty millimetre) dia as per all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying PVC plain bend of ISI marked Finolex /Superme /Prince including fixing with approved adhesive etc. complete 110 mm (one hundred ten millimetre) dia as per all lead , lifts and other incidentals approved drawing ,design and as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC P or S trap for Finolex /Superme /Prince water closet (squatting pan ) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etcetra complete 150mm (one hundred fifty millimetre) dia as per all lead , lifts and other incidentals as per the direction of the Engineer-in-charge and .The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous China water closet squatting pan (Indian type W.C. pan) ( earth work, bed concrete, foot rest and trap to be measured and paid for separately).big size Orrisa pattern No. 20004 of size 58cm x40 cm. ( fifty eight centimetre into forty centimetre )of hindware / Cera/ Jaquar in white shade as per specification or as per the directions of the Engineer-in-charge including all taxes, ,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing coloured/ white high density polythene / poly prolylene 10 litre (ten litre) capacity low level P.V.C. cistern plus) flushing cistern with dual flowing system of HINDWARE/CERA/JAQUAR a pair of C.I. or M.S. brackets complete with fitting such as lead valve syphon, 15mm (fifteen millimetre) dia PVC wall valve , coupling for connection with inlet, outlet and overflow pipes 40mm (forty millimetre) dia C.P. flush bend including cutting holes and making good the same (overflow pipe to be measured and paid for separately) as per specification as per the directions of the Engineer-in-charge including all taxes,,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing vitreous China bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately). Flat back large No. 60002 of hindware / cera in white shade type of size 430x260x350mm (four hundred thirty isto two hundred sixty isto three hundred fifty millimetre) with 5 litre auto flushing system of HINDWARE/CERA white shape as per the directions of the Engineer-in-charge including all taxes, ,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass flush pipe / spreaders for urinal with fitting such as unions, clamps etcetra (all in C.P. Brass) including cutting holes and making good the same as per the directions of the Engineer-in-charge including all taxes,,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing vitreous China wash basin No. 10001 of Hindware / cera in white shade with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings Flat back 550mm X 400 mm (five hundred fifty millimetre into four hundred millimetre) as per the directions of the Engineer-in-charge including all taxes, ,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing C.P. brass waste 32 mm (Thirty two millimetre )dia ISI marked for sink or wash basin.as per the directions of the Engineer-in-charge including all taxes ,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing 600mm X 450 mm (six hundred millimetre into four hundred fifty millimetre) bevelled edge mirror of superior glass of HINDWARE/CERA mounted on 6mm (six millimetre)thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers.as per the directions of the Engineer-in-charge including all taxes, ,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for wash basin Hindware /Cera /Jaquar in white shade complete recessed at the back for the reception of pipes and fittings. as per the directions of the Engineer-in-charge including all taxes, ,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing charomium plated brass soap dish of ISI marked Jal with C.P. brass brackets Hindware /Cera /Jaquar fixed to wooden cleats with C.P. brass screws as per the directions of the Engineer-in-charge including all taxes,,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing C.P. brass bib tap of Jal with capstan head of ISI marked Jal 15 mm (fifteen millimetre) dia withas per specification as per the directions of the Engineer-in-charge including all taxes, ,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing C.P. brass pillar tap of Jal with capstan head of ISI marked Jal 15mm (fifteen millimetre) dia.as per the directions of the Engineer-in-charge including all taxes, ,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing C.P. brass angle valve of ISI marked Jal 15mm Hindware /Sera /Jaquar (fifteen millimetre) dia as per the directions of the Engineer-in-charge including all taxes,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing PVC connection with brass union 45cm. (forty five centimetre) Long and 15mm (fifteen millimetre) dia as per the directions of the Engineer-in-charge including all taxes, ,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing C.P. brass full way valve with wheel of ISI marked Jal 15mm (fifteen millimetre) nominal bore as per the directions of the Engineer-in-charge including all taxes, ,GST, carriage of material within all leads and lifts and other incidentals.

Providing and fixing vitreous China division plate of hindware/ cera for urinal 600mmx 300 mm(Six hundred into three hundred ) as per the directions of the Engineer-in-charge including all taxes, ,GST, carriage of material within all leads and lifts and other incidentals.

Des Raj and Co.