Construction of Park near Community Centre Dhalli in ward No 21 Mashobra

Amount

Earth work in Excavation of foundation of structures in ordinary rock as per drawing and technical specifications, including setting out, Construction of shoring and bracing removal of stumps and other deleteriouss matter, dressing of sides and bottom and back filling with approved material

Excavation in earth work and filling in 15 cm. layers in foundation and plinths including ramming, watering and consolidating upto a lead of 20 metres and lift upto a 1.5 metres.Pick Work.

Carriage of material by mechanical transport including Loading & unloading & stacking of Muck/Debries in M.C. Dumping site at bharyal free of cost Tansporation charges will be paid extra (10km)

Providing from work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto all heights and removal of the same for insitu-reinforced concrete & plain concrete work in Foundation, footings basis of columns etc. and mass concrete.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto 200mm. In thickness.

Circular or curved in plan.

Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor.

Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in: Foundation and plinth:

Providing and laying cement concrete 1:1:2 (1 cement : 1 Sand : 2 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work. Foundation and plinth.

Suspended Floor roofs, landing and shelves and their support balconies, beams,girders,bressumers and contilever upto floor twolevel

Lintels beams, girders, brassumers and cantilevers upto floor two level etc.

Columns pillars, posts and struts upto floor two level.

Providing mild steel/ Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor all level-tor steel

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in In gratings framed guard bars, ladders, railling, brackets and similar works.

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement. 40 mm thick

Brick work using common burnt clay building bricks in foundation and plinth in:- Cement mortar 1:6 (1 cement : 6 sand)Second Class Bricks

6mm Cement plaster to ceiling In Cement mortar 1:3(1 Cement:3 Sand)

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 (1 cement:6 sand).

White washing with lime on undecorated wall surfaces two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Supply delivery of various outdoor fitness euipments as directed by Engineer in Charge Air Walker(Dimension:1100x500x1450mm. Specifications:- 1. Size of main tube:114x3mm steel pipe. 2 Size of supporting tube 45x45x3mm steel pipe. 3 Danger caused bt getting stuck with hair and clothes is not permitted. 4 Hazardous material like coating agent,rubber and plastic are under national newest standard.

Aero rider (Dimension 970x550x1100mm). Specifications:- 1.Size of main tube 114x3mm steel pipe. 2.Size of supporting tube 76x2.3mm steel pipe. 3.Rigid collision is not permitted. 4.the thickness of all tubes is 3mm. 5.The diameter of spindle is mot less than 120mm. 6.Danger caused bt getting stuck with hair and clothes is not permitted

Arm Twril (Dimension 1300x1050x1450mm). Specifications:- 1.Size of main tube 114x3mm steel pipe. 2.Size of supporting tube30x3mm steel pipe. 3.The distance b/w two spinners is not less than 230mm. 4.Radius of edges is not less than 3.0mm.

Hip/waist Twister(Triple):-(Dimension 1400x1400x1350mm). Specifications:- 1.Size of main tube 114x3mm steel pipe. 2.Size of supporting tube30x3mm steel pipe. 3.Radius of edges is not less than 3.0mm. 4.Hazardous material like coating agent,rubber and plastic are under national newest standard.

Sandeep

vinod kumar

SATISH KUMAR JAGTA

Bidder Name

SATISH KUMAR JAGTA