ADDN/ ALTN TO BLDG NO T-936 AND SPL REPAIR AND ALTN TO BLDG NO T-91 AT LEIMAKHONG MIL STATION

Amount

Schedule 'A'

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.

M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.

M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work, finished even and smooth without using extra cement complete all as specified and directed.(using Dimapur Sand)

M&L for rendering (10mm+5mm) thick in two layer on other than fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified and directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately)

Supply only intergral water proofing compound complete all as specified and directed.

Preparation newly plastered wall surfaces and applying two coats of oil bound distemper over a one coat of primer complete all as specified and directed.

M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip, straight flashing etc fixed with self tapping screws as specified.

Ditto all as per Sl item No. 9.00 here-in-above but except sheet (NOTE: Seviceable sheet obtained from dismantling under Sl item No 9.00 here-in-above shall be reused under the item)

S&F 0.50mm thick plain, aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing length and girth as fixed complete all as specified and directed.

Dismantling of unframed timber scantling 40 sq .cm and over in section,in any position complete all as specified and directed.

M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. Note :-Dismantling of false ceiling to be carried out carefully without damaging existing fitting and fixtures of flase ceiling items

M&L for 4mm thick plywood (no of ply 03), grade BWR, type BB fixed with nails or screws to timber frame work complete all as specified and directed.

S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.35mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.

Labour for refixing only secrviceable item obtained from ser iten no 16 for refixing in the position after making the snap grid in straight/ making good of removed existing snap grid including AC boards and provn of hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40X3 mm size 60mm long and expansion hold fastners 12.5mm dia 40 mm long in position including two coats of white wash and making good complete all as specified and directed.

Demolition of cement concrete (unreinforced) PCC in any description and in any portion not otherwise specified complete all as specified and directed.

M&L for 25 mm thick cement concrete type B1 1:2:4 using (20 mm graded stone aggregate) as in floor finishes even to receive floor tiles complete all as specified and directed.

M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection with 150 mm wide saucer drain including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.(Using dimapur sand)

M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2 1:3:6 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed by the Engineer-in-Charge

M&L for Non - skid Ceramic coloured tiles in vertical surface 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including 10mm thick rendering in CM 1:4 as backing coat to receive tiles complete all as specified and directed.

M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each and removing all unserviceable materials from site complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick 2nd class HW glazed skeleton shutters open rebated and prepared to receive glass, gauged etc with sash bars but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.24(a) fitted to chowkhats complete all as specified and directed.

S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 150 mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.

S&F 150 mm long aluminium alloy handles,fabricated type, anodised complete all as specified and directed.

S&F butt hinges, 125mm extruded aluminum alloy with galvanized mild steel hinges pin anodised and fixed type B-21 complete all as specified and directed.

S&F butt hinges, 100mm extruded aluminum alloy with galvanized mild steel hinges pin anodised and fixed type B-21 complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.

S&F floor door stopper of aluminum alloy body & tougues anodised with hard drawer steel spring fixed in floor of 150mm size complete all as specified and directed.

M&L for prepraration of new or previously untreated wood surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed.

S&F Aluminium powder coated frame/chowkats for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F glass 5.5mm thick ordinary quality and glazing with oil putty in square n. exe. 0.50 sqm in each pane including hacking out old broken glass sheet complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

S&F steel work in tubular or square trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410-W (Gde-E-250 quality A) complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide including preparation of new or previously untreated steel surfaces of any description not other wise described over 10 cm with or girth complete all as specified and directed.

S&F fancy type decorative Drapary rod of 20mm dia for window and doors with decorative doom holders fixed to wall with screw complete all as specified and directed.

Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair Vitreous china coloured Wash Hand Basin (Oval Shape) 580mm X 450mm, including 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brass CP waste fitting & 15 mm PVC connection pipe 450 mm long fixed complete all as specified and directed.

S&F vitreous china wash basin white, flat back of size 630x450mm including 32mm dia PVC waste pipe CP brass waste coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long PVC connection with PVC nut and washer complete all as specified and directed.

S&F in repair PVC flushing cistern syphonic action type,10 litters capacity, low level white with inlet ball, valve, float and handle including bracket ,PVC Connection and flush pipe complete all as specified and as directed.

Dismantling water tanks capacity exc. 500 litres and n.exc. 1000 liters and removing to store complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank(ISI marked) 1000 litre capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including all necessary inlet /outlet connections,brass ball-valve etc complet all as specified and directed.

Demolition and breaking up drain 150mm dia drain pipes(salt glazed ware,AC ,PVC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed.

M&L for concrete bed of PCC 1:4:8 type D2 using 40 mm graded stone aggregate for drain pipes bedding & hunching against the sides complete after pipes are laid, jointed and testedcomplete all as specified and directed. (a) 150 mm

S& F reinforced concrete pipes class NP-2 laid and jointed complete with collars as directed by engineer in charge for the following dia (a) 150 mm

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops rounded or chamfered on edges and other similar bands, plinth courses, parapets and railing upto 60 cm in height , and as in coping, complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. Note:- (1) Using Dimapur sand.

M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, molds mitred / stopped ends etc complete all as specified and directed. Note:- (1) Using Dimapur sand.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed with grey cement and pigments and pointed in neat cement slurry in floors including 15mm thick sreed bed in CM 1:6 complete all as specified and directed.

S&F rolled sections as in main and cross beams,hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde-E-250 quality-A) complete all as specified and as directed.

M&L for RCC (Nominal Mix) type B1 1:2:4 (20mm graded aggregate ) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.(Sand :- Dimapur) Note :- Reinforcement and form work required shall be measured and paid seperately.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finised surface of concrete complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Ditto as per item no 76.00 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for PCC 1:4:8 Type D2 (Nominal mix) (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed.(Note:- using dimapur sand)

S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Anodised aluminium powder coated aluminium window and ventilator shutters, fixed type without sash bar , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading, screws etc. including all fittings complete all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F in repairs Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (SLIM LINE or equivalent) including PVC Flush pipe 32 mm dia., and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and directed.

S&F in repair vitreous china European type wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat cover closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity white in colour and PVC flush pipe 32mm dia complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S & F in repair Angle stop valve of PTMT of any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed.

S & F in repair 15mm bore bib taps, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule complete all as specified and directed.

S&F in repair stop valves, ISI marked, 15 mm dia cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type) screwed down high pressure, screwed both ends for iron pipe or unions complete all as specified and directed.

S&F in repair stop valve 20 mm dia cast copper alloy, secrewed down high pressure, with crutch or butterfly handle secrewed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair pillar taps, ISI marked cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes for 15 mm bore dia of pipe and fixed complete all as specified and directed.

S&F in repair 20 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 g m s) complete all as specified and directed.

S&F in repair 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in trenches or in floor with steel clamps complete all as specified and as directed.

S&F in repair 75mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in trenches or in floor with steel clamps complete all as specified and as directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access door complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door complete all as specified and directed.

S&F PVC (SWR) floor trap with grating with incl jointing to waste pipe fixed in cement concerete (1:2:4) diameter of outlet pipe 75mm complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for internal dia of pipe 100mm complete all as specified and directed.

M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer complete all as specified and directed.

Supply only 4mm thick, ordinary quality frosted/obscure glass fixed to UPVC window/ ventilator in each pane complete all as specified and as directed.

S&F Soap dish, CP, white, approximate size 160x160x90mm Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed.

Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) One light point controlled by one, one way switch

One ceiling/exhaust fan point controlled by one, one way switch

One socket outlet 5 Amps 5 pin on independent board

One socket outlet 5 Amps 5 pin on same board with other switches

All as per item No. 08 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.

S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.

S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.

Supply and fixing modular Switch Socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module.

S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.

Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.

S&F sheet metal enclosure vertical DBs (for DB's when MCCB/MCBs to be used), Triple pole and neutral double door, IP-54, 4 way, 415 Volts with rated bus bar of size phase 200 Amp, 02XNeutral bar 300 Amps and 02XEarth bar including MCCB 4 pole, 125 Amps, 16 KA complete all as specified and directed.

S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.

S&F MCB single pole and neutral 40 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F PVC rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 350mm x 300mm x 50 mm deep medium quality ISI marked complete all as specified and directed.

M & L in repair for submain wiring with single core 6.0 sqmm PVC FRLS insulated unsheathed cable multi stranded copper conductor drawn through and inclduing PVC casing / capping of suitable size with all fittings and fixing accessories on roof , walls, ceiling etc including 6.00 Sqmm PVC insulated unsheathered one core multistranded copper condutor earth wire complete all as specified and directed. (Note : Two run of single core cable and one run earth wire will be measured as one length)

Taking down old unserviceable service cable including batten/suspending wires complete all as directed.

S & F of 1100 volts grade heavy duty cabled PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 10 sqmm size complete all as specified and directed.

Taking down old unserviceable LED tube light fitting / building security light complete all as specified.

S&F LED light fitting 1x20 Watt , 220 V , AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F building security light fitting new generation energy saving & environmental friendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP-66 high power LED light 25 watt including suitable size of wall bracket and connecting complete all as specified and directed.

Supply and Fixing ceiling fans complete with blades, down rods including electronic regulator and remote accessories , 230 V, 1200 mm sweep. Min air deleivery 210 CFM with service value 6.00 BEE . Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F wall fan with provn of hanging the fan on wall, 400mm sweep, BEE 5 star rating complete all as specified and directed.

Taking down ceiling/exhaust fan including dismantling all necessary electrical connections and kept in safe custody for refixing to its original position to facilitate repairs to ceiling/wall complete all as directed.

Refixing only ceiling fan removed under item Srl No 131.00 here-in-above and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

S&F Modular step type regulator 120W, 1/2 module ,heavy duty, 240 volts complete all as specified and directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

S&F metal exhaust fan AC single phase 230 volts of size 300mm sweep with louvre complete fixed and opening of wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible cable 24/0.2mm with copper conductor and necessary fitting complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, poles struts, laying of cables/pipes, etc., not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm as in soils complete all as specified and as directed.

Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point as in soils complete all as specified and as directed.

Supply and spread sand in trenches as sand cushioning to underground cable for protection with dry fine river sand and provide required cover after punning down 18CM will be measured and paid complete all as specified and directed.(Note: Thickness of sand cushion after punning down will be measured and paid.)

Supply and laying well burnt sub class ‘B’ bricks (designated 75) locally available best quality, laid dry in trenches for protection of underground cable complete all as specified and directed.

Supply, laying, Jointing, testing in replacement of LT UG cable XLPE insulated,PVC bedded galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm 3.5 core laid in trenches / on poles / walls / in ducts / passing through pipes and including necessary cable lugs, bolts, nuts and washers complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately)

M/S Apple constructions (BID ID -3365005)

L BINOD CONSTRUCTION CO (BID ID -3360105)

M/S PRADEEP CONSTRUCTION (BID ID -3357477)

Ms SATISH CHAND AGARWAL (BID ID -3358373)