Supply and Laying of 22KV (E) 3 x 95 Sq mm Alum. core XLPE insulated, armoured UG Cable and allied works from 22 KV Siddha SS-I at Sellaperumal Koil Street, Siddha Hospital to the proposed location Siddha SS-II in Subramaniyar koil Street,Saram

Supply of 22KV (E) 3C x 95 sq mm, Aluminium core XLPE insulated armoured HT UG cable as per IS 7098/part-II/1985 without any joint

Supply of 2 Nos. of heat shrinkable long sleeve outdoor type end termination kit suitable for 22 KV(E), 95Sq mm, Aluminum core XLPE UG cable with all accessories

Supply of RCC trough as specified in the drawing enclosed

Supply and laying of Cast Iron pipe of 150 Dia. as per IS.1239/part-1/2004 for cable crossing of drains, road, sanitary and water supply lines and as required in Bituminous Road (Road Cross / Drain Cross).

Labour charges for laying of one run of XLPE power cable of grade 22 KV of size 3x 95 Sq.mm direct in ground including excavation of trench of size 1.0 m (W) x 1.2m (D), sand cushioning, protective covering with RCC trough and refilling the trench etc. as required in Bituminous Road.

Labour charges for laying of one run of XLPE power cable of grade 22 KV of size 3 x 95 Sq.mm through Cast Iron pipe of size 150mm dia. Direct in ground including excavation of trench of size 1.0m (W) x 1.2 m (D) and refilling the trench etc. as required in the Bituminous Road. (Road Cross / Drain Cross)

Labour charges for providing end loose of 22 KV(E) 95 sq.mm, XLPE cable at both the ends of the HT cable including excavation of trench, sand cushioning, protective covering with RCC trough and refilling the trench etc. as required in Bituminous Road

Labour charges for provision of heat shrinkable outdoor type cable end termination kit suitable for 11 KV 3 x 95 sq mm XLPE HT UG cable

Supply and concreting of 6 nos. of route marker/cable joint marker plates at the locations as directed by the Engineer in charge (i.e for every 50 mts. a marker and to locate cable joint) as specified in Tender specification.

Transporting of HT UG cable and other required materials to site and devolution of balance materials from site as directed by the Engineer-in-Charge. Removal of excess wastage / debris from the site.

Preparation and supply of 5 copies of cable route layout drawing pasted using fevicol adhesive on cloth in the Scale of 1:5000 and submission of test report, Contractor's completion certificate and commissioning of 11 KV cables as specified in the Tender specification.

Mani Electrical Service

M/S. VENUS ELECTRICAL WORKS