Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.6 LAccepted-AOC | L1 | Accepted-AOC Admitted | |
| 2 | L2₹8.4 L+₹78,780 (10.4%)Rejected-Finance 93 4 16A BLOCK NO 3 JAWAHAR CHOWK PACHMARHI MP 461881 | PACHMARHI | HOSHANGABAD | MADHYA PRADESH | 461881 | L2 | Rejected-Finance Not Admitted | |
| 3 | L3₹8.9 L+₹1.4 L (17.8%)Rejected-Finance | L3 | Rejected-Finance Not Admitted | |
| 4 | L4₹9.2 L+₹1.6 L (21.0%)Rejected-Finance | L4 | Rejected-Finance Not Admitted | |
| 5 | L5₹9.6 L+₹2.0 L (26.0%)Rejected-Finance NEAR BUS STAND PACHMARHI MP PIN 461881 | PACHMARHI | HOSHANGABAD | MADHYA PRADESH | 461881 | L5 | Rejected-Finance Not Admitted |
Tender Value
₹12.4 L
EMD Value
₹24,900
Closing Date
30 May 2020, 6:00 pmClosed
AGE Indpt Pachmarhi
AGE Indpt Pachmarhi,Dist.-Hoshangabad(MP) - 461881
PROVN OF PARKING SHED AT JAYANTI COY AEC TRG COLLEGE AND CENTRE PACHMARHI. 2
2020_MES_341860_1
CA No. AGE(I)/PACH/ OF 2020-21(8339/E8)
Open Tender
Civil Works
Item Rate
180 days
Pachmarhi MP
Class E category a(i)
8 documents required · 8 mandatory
₹500
AGE Indpt Pachmarhi
₹24,900
Yes
23 Jul 2020
30 Apr 2020
1 Jun 2020
30 Apr 2020
30 May 2020
14 May 2020
Amount
Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out any type soil complete all as specified and directed.
Hardcore of brocken stone or boulder gauge n exc 63mm, deposited, sprade and levelled in layers n exc 15cm thick watered and rammed to true surface complete all as specified and directed.
M&L100 mm thick PCC 1:4:8(40 mm graded stone aggregate) type D-2 as in sub base complete all as specified and directed.
M &L 40mm thick sand filling (sand cushioning) under path for layers interlocking tiles complete all as specified and directed.
M&L for 60 mm thick Machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over sand cushion complete all as specified and directed. ( Note- Sand will be measured and paid separately)
M&L for 50 mm thick precast cement concrete 1:2:4 type B-0 (using 12.5mm and below stone aggregate ) in coping, etc complete with joint to match in CM 1:6 complete all as specified and directed.
Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out soft /loose soil.
M/L cement concrete Type D 2 1;4;8 (40mm graded aggregate)in foundation ,filling , mass concrete complete all as specified and directed.
M&L for modular brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick on fair face of bricks or concrete surface in CM 1:6 complete all as specified and directed.
Preparation of new surface of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in loose/soft soil complete all as specified and directed.
Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc1.5m above the starting points complete all as specified and directed.
Excavating in post holes each nexc 0.5cum getting out in any type soil complete all as specified and directed.
M/L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation for posts hole complete all as specified and directed.
S&F for Steel work in tubular trusses(framed works as in purlin, rafters, column square/rectangular, round or angle section) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed.
S&F Hand rails, half round or other stock section or core for woodenbhand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ®
S&F Mild steel screw bolts10 mm dia (machine made) 100 mm long with hexagonal or squareheads at one end and screwed the other, orscrewed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.
M&L Pre- painted. Galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.
M&L painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation , priming with zinc chromate and two coats of synthetic enamel paint complete all as specified and directed.
DEEPAK JAISWAL
GHASI RAM SAHU
MODI CORPORATION
SUBIR KUMAR ROY
SATHI ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .